monthebiff Posted May 13, 2021 Share Posted May 13, 2021 I've been wanting to build a Vb for some time and when I saw the new release from Exito Decals I decided to have a go at converting the Revell Mk.IIa in to a Vb with the help of an AML wing update set as well as a few other aftermarket bits and pieces. I did concider using the HobbyBoss kit but I'm not a huge fan of the general shape of the upper fuselage which all looks a bit flat and fat to my eye. I have a decent amount of AM for this one as well as a few bits and pieces taken from a failed HobbyBoss Mk.V that never made it over the line. I also have some Barracuda resin cockpit updates and a lovely resin Rotol prop from Department of Correction I need to dig out of the stash and to finish off I would like to thank Carl (BlrwestSIR) for kindly donating a pair of clipped wingtips left over from one of his Tamiya kits. Regards. Andy Dpgsbody55, Martinnfb, Kagemusha and 16 others 19 Link to comment Share on other sites More sharing options...
Nighthawk Calling 1 Posted May 13, 2021 Share Posted May 13, 2021 I will be watching this, as I have the same decal sheet and was planing to do the same,this will show me how much work there is to do. monthebiff 1 Link to comment Share on other sites More sharing options...
LSP_Kevin Posted May 13, 2021 Share Posted May 13, 2021 Cool project, Andy! Kev monthebiff 1 Link to comment Share on other sites More sharing options...
dennismcc Posted May 14, 2021 Share Posted May 14, 2021 Very interesting, this should be good, loads of goodies. Cheers Dennis monthebiff 1 Link to comment Share on other sites More sharing options...
IainM Posted May 14, 2021 Share Posted May 14, 2021 Nice, and thank you! I didn't realize there was a conversion set like that out there. That is indeed good news for a future project. Looking forward to seeing your build! monthebiff 1 Link to comment Share on other sites More sharing options...
monthebiff Posted May 14, 2021 Author Share Posted May 14, 2021 On 5/13/2021 at 9:34 PM, Nighthawk Calling 1 said: I will be watching this, as I have the same decal sheet and was planing to do the same,this will show me how much work there is to do. Not to difficult to do at all, the main thing is the B wing modification made easier with the AML set and otherwise filling and opening up some new holes. Regards.Andy Nighthawk Calling 1 1 Link to comment Share on other sites More sharing options...
monthebiff Posted May 14, 2021 Author Share Posted May 14, 2021 2 hours ago, IainM said: Nice, and thank you! I didn't realize there was a conversion set like that out there. That is indeed good news for a future project. Looking forward to seeing your build! I had no idea either Iain until recently! Hopefully I can do this justice as it should be a simple conversion. I built the Revell kit when it first came out and backdated to a Mk.Ia. In general its a pretty simple kit to build. Regards. Andy IainM 1 Link to comment Share on other sites More sharing options...
monthebiff Posted May 14, 2021 Author Share Posted May 14, 2021 (edited) So, my initial work on this build is to focus on the wing and converting the A wing to the B wing. All in all not to difficult with some filling of various panel lines, shell ejector chutes and one 303 gun port. The Eduard exterior set is really nice and covers the lower wing including wheel bays and radiator/ oil cooler. The wheel bay parts are a little tricky to fit but make a big difference to the look of the underside. I then opened up the wings to accept the 20mm Hispano's as well as adding the ejector chutes next to the wheel bays. Next up is some rescribing and then adding the AML wing bulge set. I'm going to use the oil cooler from my old HB Spitfire failure as its a pretty good shape So far so good! Regards.Andy Edited May 14, 2021 by monthebiff MikeMaben, JefH, Fanes and 9 others 12 Link to comment Share on other sites More sharing options...
JefH Posted May 14, 2021 Share Posted May 14, 2021 Really excited to see this one come together. I've been thinking about attempting the Spit V conversion with the same items. Cheers- Jeff monthebiff 1 Link to comment Share on other sites More sharing options...
R Palimaka Posted May 15, 2021 Share Posted May 15, 2021 Very cool project with lots of extras! This will be fun to follow. Richard monthebiff 1 Link to comment Share on other sites More sharing options...
IainM Posted May 15, 2021 Share Posted May 15, 2021 8 hours ago, monthebiff said: I had no idea either Iain until recently! Hopefully I can do this justice as it should be a simple conversion. I built the Revell kit when it first came out and backdated to a Mk.Ia. In general its a pretty simple kit to build. Regards. Andy I will be following with great interest! Managed to snap up the last in-stock AML Vb conversion from Hannants this morning after reading your post Paul in Napier and monthebiff 1 1 Link to comment Share on other sites More sharing options...
John1 Posted May 15, 2021 Share Posted May 15, 2021 I’ve been Jonesing to build a Malta VB, following this build intently. monthebiff 1 Link to comment Share on other sites More sharing options...
John1 Posted May 15, 2021 Share Posted May 15, 2021 6 hours ago, IainM said: I will be following with great interest! Managed to snap up the last in-stock AML Vb conversion from Hannants this morning after reading your post Any idea if this set is OOP or if it will be restocked? monthebiff 1 Link to comment Share on other sites More sharing options...
monthebiff Posted May 15, 2021 Author Share Posted May 15, 2021 6 hours ago, IainM said: I will be following with great interest! Managed to snap up the last in-stock AML Vb conversion from Hannants this morning after reading your post 14 minutes ago, John1 said: Any idea if this set is OOP or if it will be restocked? There were 5+ available when I ordered mine from Hannants last week so the rest have disappeared pretty quickly! They will probably get a restock but they are in stock on the AML site https://eshop.aml.cz/en/pur-sets/1487-sspitfire-mkvb-the-conversion-set.html Regards. Andy John1 and IainM 1 1 Link to comment Share on other sites More sharing options...
monthebiff Posted May 15, 2021 Author Share Posted May 15, 2021 13 hours ago, JefH said: Really excited to see this one come together. I've been thinking about attempting the Spit V conversion with the same items. Cheers- Jeff Thanks for looking in Jeff, its a pretty simple conversion and the actual kit builds up really easily. Regards. Andy JefH 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now