JeepsGunsTanks Posted April 28, 2021 Share Posted April 28, 2021 On 4/25/2021 at 9:20 AM, Pete Fleischmann said: Hello all- I stumbled on this gem at KERV while doing some L-39 instruction. Not the same as a -6M; but plenty of similar details to examine and photograph pretty cool. This one is used for power line support. cheers Pete I saw one of these in a field in Marin County today. Not sure why it was there. This one will always be the best one... Or maybe this one, Derek B, GMK, Uncarina and 4 others 7 Link to comment Share on other sites More sharing options...
Confusionreigns178 Posted April 28, 2021 Share Posted April 28, 2021 (edited) How on earth does a chopper this tiny manage to haul 6 men? I have no idea. Thanks for sharing your build with us. It's looking "boss level" so far! Chris. PS: As I'm sure a lot of folks will be aware, the Vietnam Loach in the previous post was flown by Captain Hugh Mills and was named "Miss Clawd IV". This man was shot down 16 times whilst in S.E. Asia, including four times in one day! "Lucky" doesn't even begin to describe his time in-country. If you want to know more about Hugh Mills, I would thoroughly recommend his book "Low Level Hell" - it's an amazing read. Edited April 28, 2021 by Confusionreigns178 Amending some information. KiwiZac, D.B. Andrus, Scotsman and 6 others 7 2 Link to comment Share on other sites More sharing options...
JeepsGunsTanks Posted April 28, 2021 Share Posted April 28, 2021 18 minutes ago, Confusionreigns178 said: How on earth does a chopper this tiny manage to haul 6 men? I have no idea. Thanks for sharing your build with us. It's looking "boss level" so far! Chris. PS: As I'm sure a lot of folks will be aware, the Vietnam Loach in the previous post was flown by Captain Hugh Mills and was named "Miss Clawd IV". This man was shot down 16 times whilst in S.E. Asia, including four times in one day! "Lucky" doesn't even begin to describe his time in-country. If you want to know more about Hugh Mills, I would thoroughly recommend his book "Low Level Hell" - it's an amazing read. Mills has been a Hero of mine since I was a kid. "Low Level Hell" is an amazing read. I just read it again about a month ago. Things have a different impact on you when you read them again in your 40s. Mills was also mentioned and wrote a part of the Squadron Signal book on attack choppers in Vietnam called "Gunslingers in action", by Lou Drendel, and I think he gets mentioned in Jim Mesko's Airmobile. Pete Fleischmann, easixpedro and Troy Molitor 3 Link to comment Share on other sites More sharing options...
Troy Molitor Posted April 28, 2021 Share Posted April 28, 2021 "Low Level hell" is an amazing book. Thanks for the reminder. I might have another go it is soon. Another favorite is a book called "Night Witches". A book mentioning the female Russian aviator of WWII. Uncarina, JeepsGunsTanks and Pete Fleischmann 3 Link to comment Share on other sites More sharing options...
D Bellis Posted April 29, 2021 Share Posted April 29, 2021 22 hours ago, Confusionreigns178 said: PS: As I'm sure a lot of folks will be aware, the Vietnam Loach in the previous post was flown by Captain Hugh Mills and was named "Miss Clawd IV". Miss Clawd IV was serial 17340 (not 17173 which is the airframe shown in the pic). 17173 was reportedly Darkhorse 19's machine (his name escapes me at the moment, but should be Googleable). C/16 Cav's Loaches were all similarly marked, but not identical. HTH, D JeepsGunsTanks, Cheetah11, KiwiZac and 1 other 4 Link to comment Share on other sites More sharing options...
Pete Fleischmann Posted May 2, 2021 Author Share Posted May 2, 2021 Hey all- Got a little more done on the cabin. The cargo area gets pretty beat up- lots of gear tossed back there to support the SF riders, so chipping and scuffs are in order, so I started on all that. With the doors off, this area also gets pretty dusty down range..that’ll come later. so...chipping first in the layered approach to weathering. First, all of this gets shot with MM steel and touches of jet exhaust- then a shot of hairspray; de-canted and sprayed with the airbrush. Once that is dry, spray another color layer with Tamiya yellow- green first, I’ll chip the bare metal back to the primer. Wet the area you want to chip with water. I use a micro brush and sharpened toothpick to chip down to the bare metal. subtly is important Once happy with that, shoot a barrier coat of flat clear lacquer to protect the chipping. When that is dry spray another coat of hairspray. when the hairspray is dry, shoot a coat of Tamiya rubber black, and start the chipping process again this looks pretty stark/severe right now- that’s ok. The next layers in the weathering process (dry brush, washes, and dust) will add a lot of life to this-Also, I’ll be stowing some very cool SF gear back here (Carl Gustav recoilless rifle, breaching gear, ammo, etc). Should be fun- cheers for now Pete easixpedro, Uncarina, Greg W and 16 others 19 Link to comment Share on other sites More sharing options...
shark64 Posted May 2, 2021 Share Posted May 2, 2021 Looking super sharp. Pete Fleischmann 1 Link to comment Share on other sites More sharing options...
Winnie Posted May 2, 2021 Share Posted May 2, 2021 On 4/18/2021 at 9:24 AM, Pete Fleischmann said: They look like they both are at that part of CRM where they are both thinking "I don't want to talk to you any more..." Pete Fleischmann and D.B. Andrus 2 Link to comment Share on other sites More sharing options...
Pete Fleischmann Posted May 7, 2021 Author Share Posted May 7, 2021 Hey all- another dry brush down, a few different shades of black here and there, and a little detail paint before I really get after this section- cheers Pete Landrotten Highlander, Anthony in NZ, Greg W and 12 others 15 Link to comment Share on other sites More sharing options...
johncrow Posted May 8, 2021 Share Posted May 8, 2021 So informative, Pete. As I kid I grew up shooting pellet guns, then 22s, then real rifles. I 'knew' how to shoot. But I was in the service for a decade before I listened to the folks who knew much more than me on shooting, the USAF CATM guys. I went from always qualifying on the range, to always shooting expert. Your step-by-steps are the same deal with regard to modeling. I've been modeling a long time; it is time to finally start listening to you! jp CATM: Combat Arms Training and Maintenance Pete Fleischmann 1 Link to comment Share on other sites More sharing options...
Pete Fleischmann Posted May 8, 2021 Author Share Posted May 8, 2021 (edited) 12 hours ago, johncrow said: So informative, Pete. As I kid I grew up shooting pellet guns, then 22s, then real rifles. I 'knew' how to shoot. But I was in the service for a decade before I listened to the folks who knew much more than me on shooting, the USAF CATM guys. I went from always qualifying on the range, to always shooting expert. Your step-by-steps are the same deal with regard to modeling. I've been modeling a long time; it is time to finally start listening to you! jp CATM: Combat Arms Training and Maintenance Thanks John- that’s kind of you. funny that you mention shooting. Like you, I grew up shooting, and passed that skill set on to my sons..and now, my two oldest boys are men; Army Infantry officers, and skilled shooters-Much better than I could ever hope to be. I gave them the basics I guess, but now I listen to them. So I’m going to hijack my own thread for a sec. I built this rifle during lockdown. It is one of several weapons I own, but is my current favorite. It is chambered in 300 AAC and suppressed. Holographic sight, backup iron sights, tactical light, green laser, and with subsonic rounds is super quiet. I have a little more money to spend on stuff like this than my sons, but they show me how best to use it, and I love training with them. They teach me now, and that’s pretty cool. As long as the government allows, I’ll pass this rifle on to one of them some day. I can teach someone how to fly..maybe share some modeling knowledge..but whatever it is, the things we learn from each other in life are what keep us moving forward, yes? That’s what I love about hanging out here- so much of what I “know” I learned here- I’m just passing it on.. cheers Pete Edited May 8, 2021 by Pete Fleischmann Coherence I guess..I think JeepsGunsTanks, Michael931080, johncrow and 7 others 10 Link to comment Share on other sites More sharing options...
Pete Fleischmann Posted May 8, 2021 Author Share Posted May 8, 2021 Hey all- here’s a technique for making wires- grab some black two-part epoxy putty. Roll it into a ball, and let it sit for about 20 minutes to let it set up. Not rock hard; just not sticky. when it sets up, roll it into a string Cut it to the desired length..pick it up with a brush damp with water place it where it goes cheers Pete Starfighter, Landrotten Highlander, Anthony in NZ and 16 others 15 4 Link to comment Share on other sites More sharing options...
spartacus2000 Posted May 8, 2021 Share Posted May 8, 2021 AWESOME!!!!!!! The figures are fantastic also the paint of the pilots Bravo Pete Fleischmann 1 Link to comment Share on other sites More sharing options...
Pete Fleischmann Posted May 9, 2021 Author Share Posted May 9, 2021 Kinda turning into a rats nest back there..and there are a few more cable bundles to run still- Not a lot of stowage room in the aft cabin with the tank installed- this space is gonna be jammed. Would love to put a working dog back here, but might not have room- cheers Pete johncrow, scvrobeson, Starfighter and 16 others 19 Link to comment Share on other sites More sharing options...
Neo Posted May 10, 2021 Share Posted May 10, 2021 Oh man so many thing to comment on 1 I LOVE that M4 omg. unfortunately all AR-15 base rifles are now banned in canada 1.1 im planning to teach my 2 girls shoot. waiting for them to be a little older 2 that black epoxy tip is GOLD 3 your handy work on that cockpit is amazing Pete Fleischmann 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now