Rick Griewski Posted November 4, 2020 Author Share Posted November 4, 2020 11 hours ago, LSP_Mike said: Verlinden did an 88 in 1/15th. Yeah I know. I thought I just wish for a PAK 40 and hope that who ever did the kit would fall in line with the 1/16 scale thing. Link to comment Share on other sites More sharing options...
Greg W Posted November 4, 2020 Share Posted November 4, 2020 Rick, is this something that might fit the bill? https://www.bimfico.com/index.php?main_page=product_info&products_id=577070 Greg LSP_K2 and CATCplSlade 2 Link to comment Share on other sites More sharing options...
MackTibbo Posted November 4, 2020 Share Posted November 4, 2020 On 11/2/2020 at 4:13 PM, thierry laurent said: Indeed! Out of my memory, 1/15th or 120mm figure scale ones were released (e.g. Verlinden) but not in 1/16th scale. 1/16 and 120mm are basically interchangeable. Just like 1/32 and 54mm. Link to comment Share on other sites More sharing options...
thierry laurent Posted November 4, 2020 Share Posted November 4, 2020 12 minutes ago, MackTibbo said: 1/16 and 120mm are basically interchangeable. Just like 1/32 and 54mm. Not so simple. The Marder III had a 465cm length. This means 31cm in 1/15th but 29cm in 1/16th! Close to one inch is quite a difference. So adding a 1/15th gun on a 1/16th tank will look weird. CATCplSlade, Greg W and Rick Griewski 2 1 Link to comment Share on other sites More sharing options...
LSP_K2 Posted November 4, 2020 Share Posted November 4, 2020 6 hours ago, GDW said: Rick, is this something that might fit the bill? https://www.bimfico.com/index.php?main_page=product_info&products_id=577070 Greg Seems awfully cheap. Do you own one? Link to comment Share on other sites More sharing options...
Greg W Posted November 4, 2020 Share Posted November 4, 2020 3 minutes ago, LSP_K2 said: Seems awfully cheap. Do you own one? No, I have only seen it online. I have a 1/16 WWII Kafer on the back burner, so I run across large scale armor stuff like that, when looking around at things online for my VW project. LSP_K2 1 Link to comment Share on other sites More sharing options...
Rick Griewski Posted November 17, 2020 Author Share Posted November 17, 2020 On 11/4/2020 at 8:10 AM, GDW said: Rick, is this something that might fit the bill? https://www.bimfico.com/index.php?main_page=product_info&products_id=577070 Greg No joy with the web site. Link to comment Share on other sites More sharing options...
LSP_Ray Posted November 17, 2020 Share Posted November 17, 2020 Vandra also has a Soviet AA gun you could make into an early Marder III! Rick Griewski, thierry laurent and LSP_K2 3 Link to comment Share on other sites More sharing options...
LSP_K2 Posted November 17, 2020 Share Posted November 17, 2020 Now I'm considering the idea of a 1:16 Flak 38 mounted on the Panzer IV chassis for an awesome Mobelwagen, but have no idea if the Flak is available or not. Link to comment Share on other sites More sharing options...
LSP_Mike Posted November 18, 2020 Share Posted November 18, 2020 Again, Verlinden did a 1/15 37mm Link to comment Share on other sites More sharing options...
LSP_K2 Posted November 18, 2020 Share Posted November 18, 2020 5 hours ago, LSP_Mike said: Again, Verlinden did a 1/15 37mm I'm referring to the Flak 38, 20mm quad, not the 37mm gun. Link to comment Share on other sites More sharing options...
CATCplSlade Posted November 19, 2020 Share Posted November 19, 2020 (edited) On 11/17/2020 at 2:38 PM, LSP_K2 said: Now I'm considering the idea of a 1:16 Flak 38 mounted on the Panzer IV chassis for an awesome Mobelwagen, but have no idea if the Flak is available or not. Just remember the upper hull structure was modified for the Mobelwagen in order to support the drop-gates. Not at all the same as a stock Pz IV. And also that the Flak 38 version was just the prototype; the Flak 37 was the production vehicle. Edited November 19, 2020 by CATCplSlade LSP_K2 1 Link to comment Share on other sites More sharing options...
LSP_K2 Posted November 19, 2020 Share Posted November 19, 2020 5 minutes ago, CATCplSlade said: Just remember the upper hull structure was modified for the Mobelwagen in order to support the drop-gates. Not at all the same as a stock Pz IV. And also that the Flak 38 version was just the prototype; the Flak 37 was the production vehicle. Right. It's just that the version with the Flak 38 quad, was so darned cool. Link to comment Share on other sites More sharing options...
panzerrob Posted November 19, 2020 Share Posted November 19, 2020 (edited) Not that difficult: https://www.ludwigs-hobby-seite.de/wirbelwind Flakpanzer iv.html https://www.ludwigs-hobby-seite.de/Moebelwagen sdkfz 161.html With regards, Rob Edited November 19, 2020 by panzerrob Added a link! LSP_K2 1 Link to comment Share on other sites More sharing options...
LSP_Mike Posted November 19, 2020 Share Posted November 19, 2020 A little thread drift guys? A 1/16 Marder might be tough. Prolly find a machine shop to turn a barrel, but you might need to scale up some 1/35 parts for the rest Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now