PhilB Posted October 26, 2020 Share Posted October 26, 2020 Function before form and so ugly it's brilliant. Used to see these over my house when I was a kid. Nothing else sounds quite like it. Plenty of foreign schemes too. Out2gtcha, Kagemusha, Anthony in NZ and 5 others 7 1 Link to comment Share on other sites More sharing options...
NigeW Posted October 26, 2020 Share Posted October 26, 2020 Looks like we may have a Gannet on the market before a UK F4 in 1/32; never thought I would see that! Given the commonality between the AEW and AS variants, plus the design of the wheel wells in the video, makes me hopeful that we may see an AS/COD version in the future. Derek B, turboprop4 and mpk 3 Link to comment Share on other sites More sharing options...
Cees Broere Posted October 26, 2020 Share Posted October 26, 2020 Let Anthony and me finish our British Phantom projects and they the gates will open to reveal a deluge of UK-type kits mpk, Anthony in NZ, wunwinglow and 1 other 3 1 Link to comment Share on other sites More sharing options...
Rick Griewski Posted October 26, 2020 Share Posted October 26, 2020 Seems to go that way. No PT-17 styrene then two models. Not one but five I-16 variants. Desperate for a VAL I start a paper kit then we get a styrene kit on the way. Someone finished a Vac Ki-45 and we get a styrene kit from ZM. I was almost done with a Ju-88 vac and then Revell styrene. No Lancasters then two. I do not however understand the Gotha on floats (I did buy one). So get busy pretending with some builds and more may pop up. Anthony in NZ and mpk 2 Link to comment Share on other sites More sharing options...
Phartycr0c Posted October 26, 2020 Share Posted October 26, 2020 Again tempted by the unusual lines of this wee beastie.! I must resist! Lothar, Derek B, Stevepd and 1 other 3 1 Link to comment Share on other sites More sharing options...
turboprop4 Posted October 26, 2020 Share Posted October 26, 2020 My apologies for the late reply here, guys. To answer a few of the questions/comments I saw...the video is new, not old. In fact, I just recorded and edited it yesterday in between sessions working on the master patterns. Alan, Chuck, and I have been working together since the summer on this one. Still lots left to do by making progress each day. I'll be starting on the 1/32 wing fold patterns here soon as the cockpit and other 3D printed parts are in work by Chuck. And we are working on a 1/32 CA-15 as "we speak" and also a talking a few other 1/32 subjects, including an ASW version that hopefully we'll get rolling on soon. Cheers! Chad MikeMaben, Stevepd, Trak-Tor and 9 others 9 3 Link to comment Share on other sites More sharing options...
Anthony in NZ Posted October 26, 2020 Share Posted October 26, 2020 7 minutes ago, turboprop4 said: My apologies for the late reply here, guys. To answer a few of the questions/comments I saw...the video is new, not old. In fact, I just recorded and edited it yesterday in between sessions working on the master patterns. Alan, Chuck, and I have been working together since the summer on this one. Still lots left to do by making progress each day. I'll be starting on the 1/32 wing fold patterns here soon as the cockpit and other 3D printed parts are in work by Chuck. And we are working on a 1/32 CA-15 as "we speak" and also a talking a few other 1/32 subjects, including an ASW version that hopefully we'll get rolling on soon. Cheers! Chad Great to see you here Chad! I am sure there will be lots of people wanting this kit, the upgrades and printing extras look brilliant! Keep up the great work Cheers Anthony Kagemusha, Stevepd, mpk and 1 other 4 Link to comment Share on other sites More sharing options...
geedubelyer Posted October 26, 2020 Share Posted October 26, 2020 Thanks for the heads-up Kev. Wow! Who would have ever thought that we'd have a 1/32nd scale Fairey Gannet? This has long been a favourite of mine. In the same vein as a Wessex she's so ugly she's beautiful (at least to some of us). So many schemes to finish her in. The AEW version with folded wings would yield a magnificent model. Personally I've yet to build a full resin aircraft. Who knows, could this be the one? Good luck in bringing this to the market guys. turboprop4, mozart, Phartycr0c and 2 others 5 Link to comment Share on other sites More sharing options...
Stevepd Posted October 26, 2020 Share Posted October 26, 2020 2 hours ago, turboprop4 said: My apologies for the late reply here, guys. To answer a few of the questions/comments I saw...the video is new, not old. In fact, I just recorded and edited it yesterday in between sessions working on the master patterns. Alan, Chuck, and I have been working together since the summer on this one. Still lots left to do by making progress each day. I'll be starting on the 1/32 wing fold patterns here soon as the cockpit and other 3D printed parts are in work by Chuck. And we are working on a 1/32 CA-15 as "we speak" and also a talking a few other 1/32 subjects, including an ASW version that hopefully we'll get rolling on soon. Cheers! Chad Thanks for pursuing this Chad, it’s very much appreciated. turboprop4 and mpk 2 Link to comment Share on other sites More sharing options...
MikeMaben Posted October 27, 2020 Share Posted October 27, 2020 9 hours ago, turboprop4 said: ...And we are working on a 1/32 CA-15 as "we speak" Kangaroo cool ! 19 hours ago, PhilB said: Function before form and so ugly it's brilliant. Ugly cool mpk, turboprop4 and Rockie Yarwood 3 Link to comment Share on other sites More sharing options...
Cees Broere Posted October 27, 2020 Share Posted October 27, 2020 I want that CA-15. It's up there with the Martin Baker MB-5 and Spiteful for brute powerrrr. MikeMaben, turboprop4 and mpk 3 Link to comment Share on other sites More sharing options...
NigeW Posted December 4, 2020 Share Posted December 4, 2020 More progress on the Gannet: Flying S Models – Posts | Facebook Looks like those who wanted it with wing folds may get their wish. Bring it on! Lee White, Rick Griewski, Kagemusha and 4 others 6 1 Link to comment Share on other sites More sharing options...
mpk Posted December 5, 2020 Share Posted December 5, 2020 On 10/27/2020 at 6:32 AM, turboprop4 said: My apologies for the late reply here, guys. To answer a few of the questions/comments I saw...the video is new, not old. In fact, I just recorded and edited it yesterday in between sessions working on the master patterns. Alan, Chuck, and I have been working together since the summer on this one. Still lots left to do by making progress each day. I'll be starting on the 1/32 wing fold patterns here soon as the cockpit and other 3D printed parts are in work by Chuck. And we are working on a 1/32 CA-15 as "we speak" and also a talking a few other 1/32 subjects, including an ASW version that hopefully we'll get rolling on soon. Cheers! Chad Ooh ooh ooh OMG!!!! RAN Gannet and CA-15. Jack 1 Link to comment Share on other sites More sharing options...
Royboy Posted December 5, 2020 Share Posted December 5, 2020 On 10/26/2020 at 4:43 PM, Phartycr0c said: Again tempted by the unusual lines of this wee beastie.! I must resist! Resistance is futile!!! Link to comment Share on other sites More sharing options...
Basta Posted December 5, 2020 Share Posted December 5, 2020 Oh my Lord, what is that thing?? How on earth did you guys come up with the Spitfire? alaninaustria, thierry laurent and Stevepd 1 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now