Jump to content

Recommended Posts

Thanks ladies :)

 

a bit more done..

 

..the undercarriage legs are something I thought I might start without drawings as I have a fair bit of dimensional info off the 4 view I do have..

 

we can see here there is a lower aerofoil compression strut that is in a wider upper housing, with the axle (looking like a rod, but is also aerofoil) and a complex bunch of fittings either end to mount the main strut, trailing strut and bracing wires..

 

 

Zp8Wsd.jpg

 

gPxyZY.jpg

 

 

..to make the aerofoil compression strut I tried a number of things, from left to right - just compressing ali tube - fail, it just caves in the middle, then ali tube filled with balsa (by hammering it into it like a nail - getting there, but impossible to get an aerofoil section, then balsa fill with a cocktail stick rammed in to give a solid round nose cross section and a good squish of the trailing edge..

 

DhLNeP.jpg

 

..used the cocktail stick/balsa process to make up the two struts and soldered rod into square section brass before dremelling away the waste & drilling to get two clevis mounts..

 

oK97lo.jpg

 

 

..the axle started as a brass rod with a number of brass fittings soldered to get the fittings for the compression strut and trailing strut..

 

feho9U.jpg

 

 

..these fitting also have a tiny hole inboard for the bracing wire mount..

 

ebKU7u.jpg

 

..to get the aerofoil section I milled the back of the axle flat and added a plastic rectangular block which itself had a slit routed into it to let in a brass rod to give a nice solid, rounded trailing edge..

 

m0Ju6d.jpg

 

..then the aerofoil was filled with P38 filler & sanded..

 

66N9PN.jpg

 

..and then primed with mr surfacer..

 

AWFE9L.jpg

 

80qvs5.jpg

 

 

..and then some tiny bolts dry hold the all the parts in place..

 

CLOlDO.jpg

 

PPkwjM.jpg

 

..I just hope it holds all the weight securely later on...

 

..also hope I get some drawings of the upper mounts tomorrow as these are a much more distinctive shape..also ordered some 'O' rings that are the exact dimensions of the tyres - there is a website you just type in what you want and they find it :)

 

TTFN

 

Peter

 

 

 

Link to post
Share on other sites

so after an early start, I am back from my research trip :)

 

I spoke to Guy Black this morning and he allowed me full access to K5674 in Hangar 3 in Duxford - anyone who knows the warbird circuit will know of Guy, he is a legend in bringing old birds back to life through AeroVintage & Retrotec and operating them. It was a real privelege for me

 

Took loads of pictures - unfortunately a tonneau cover was over the cockpit and the security guy (probably rightly) didn't want to mess with it - but for the exterior I have everything :)

 

..these of the U/C will definately help..

 

MBBFyx.jpg

 

1vX0oo.jpg

 

vLDpe7.jpg

 

..I then went on from there to meet up with someone who let me photograph a number of drawings - these are I think Hawker via the Danish Government for the Nimrods they operated - there is Danish sub-notes on them

 

I can't post or share them, but I will give you an idea of the goldmine it was for me..

 

..will probably remake the seat..

 

pm6SVnLij

 

..stringer positions on the fuselage are not on the Westburg plans as a substructure so these will be really helpful..

 

Ua02Ds.jpg

 

..like digging up history :)

 

bY8swl.jpg

 

..the pictures aren't great as they were just spread on the floor in a small room one at a time, but I have many useful ones and am super happy with what I got out of today :)

 

..back soon

 

TTFN

Peter

 

 

Link to post
Share on other sites

need help chaps - does anyone have even one period picture of a Fury instrument panel?

 

..have a few of resto's & the Nimrod, but nothing like a contemporaneous Pilots notes picture showing one back in the day

 

thanks in advance (& with fingers crossed)

 

Peter

Link to post
Share on other sites
2 hours ago, airscale said:

need help chaps - does anyone have even one period picture of a Fury instrument panel?

 

..have a few of resto's & the Nimrod, but nothing like a contemporaneous Pilots notes picture showing one back in the day

 

thanks in advance (& with fingers crossed)

 

Peter

Peter,

 

Scale Aviation Modeller August 1997 issue did a feature on the Fury. There is a picture of a period IP on page 518. A PDF copy can be had from The Internet Archive here:

 

https://archive.org/details/Scale_Aviation_Modeller_1997-08/mode/2up

 

Cheers, and thanks for sharing your beautiful work!

 

Rockie

Link to post
Share on other sites

Thanks guys - Rockie that article in Scale Aviation Modeller was particularly helpful - not only for a period IP pic but also for the old three dimensional parts drawings of things like the rudder bar - thank you

 

I have been at the bench, but not modelling.. I have taken the drawings and photo's I have and have prepared the PE needed for the interior of the Fury - hundreds of parts in total. I also prepared the instruments which I will get made as decals in my next airscale stock order..

 

first the PE fret - this has an F4U panel in the corner for a fellow modeller in 1/18 who goes to the n'th degree like I try to to be accurate in every detail (you know who you are Jay...)

 

..here we have brackets, IP, anciliaries, seat bits, guns bits, rudder & control stick parts and a set of formers that surround the tube structure to give 'body' to the fuselage..

 

sbBgSM.jpg

 

..a bit closer..

 

5BETjd.jpg

 

..and here is the IP taken from a drawing with the instruments I could identify for the Fury 1..

 

zBdhT9.jpg

 

the drawing is for a Nimrod, but the only difference I could find was the removal of two switches on the left of the panel..

 

..need to get these into PPD and Fantasy Printshop for production now, while I remake the seat as the one I made differs from the drawings..

 

..that was a LOT of work...

 

TTFN

Peter

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...