AlbertD Posted September 9, 2020 Share Posted September 9, 2020 I was priming some small parts today for my Phantom build including the wheels. As I got to the wheels a thought popped up that I read somewhere that there is some incompatibility with either the plastic or the type of paint and the rubber of the tires. What should I watch for? Link to comment Share on other sites More sharing options...
chrish Posted September 10, 2020 Share Posted September 10, 2020 15 hours ago, AlbertD said: I was priming some small parts today for my Phantom build including the wheels. As I got to the wheels a thought popped up that I read somewhere that there is some incompatibility with either the plastic or the type of paint and the rubber of the tires. What should I watch for? I built my Tamiya 1/32 phantom in the 90’s, I’ve not noticed any problem with incompatibility yet. however the Academy F/A 18 with (optional) “rubber” tires sticks like glue to my display case shelf to the point I almost tear the gear off lifting it...different model makers use different material apparently AlbertD 1 Link to comment Share on other sites More sharing options...
Troy Molitor Posted September 10, 2020 Share Posted September 10, 2020 Just FYI. There is a new company making resin type /rubber wheels that I would not recommend. These tire/ wheel combinations seem to come out not too long ago. Either the resin hubs had slight shrinkage or the resin/rubber like tires are too big after removing the inner molding channels. The amount of time/ energy and outcome do not justify the amount of wasted time I spent on these "new" aftermarket tires. Dissapointed to say the least. AlbertD 1 Link to comment Share on other sites More sharing options...
nmayhew Posted September 10, 2020 Share Posted September 10, 2020 Please name the company you are talking about Link to comment Share on other sites More sharing options...
Confusionreigns178 Posted September 11, 2020 Share Posted September 11, 2020 Yep, I would be very keen to know which company it is, too. Chris. PS: I hope it's not Armoury, as I've recently bought two of their resin wheels sets.... Link to comment Share on other sites More sharing options...
D Bellis Posted September 12, 2020 Share Posted September 12, 2020 On 9/10/2020 at 5:13 PM, nmayhew said: Please name the company you are talking about 20 hours ago, Confusionreigns178 said: Yep, I would be very keen to know which company it is, too. How many aftermarket companies make wheels with rubber tires? D Link to comment Share on other sites More sharing options...
Confusionreigns178 Posted September 12, 2020 Share Posted September 12, 2020 Yep, I probably should have read the OP with a bit more care.... It seems a very odd choice on the company's part, since some types of rubber and styrene have a reputation for not playing well together. Chris. Link to comment Share on other sites More sharing options...
Dave Williams Posted September 12, 2020 Share Posted September 12, 2020 On 9/10/2020 at 5:01 PM, Troy Molitor said: Just FYI. There is a new company making resin type /rubber wheels that I would not recommend. These tire/ wheel combinations seem to come out not too long ago. Either the resin hubs had slight shrinkage or the resin/rubber like tires are too big after removing the inner molding channels. The amount of time/ energy and outcome do not justify the amount of wasted time I spent on these "new" aftermarket tires. Dissapointed to say the least. It isn’t Halberd, is it? https://www.largescaleplanes.com/reviews/review.php?rid=2217 Link to comment Share on other sites More sharing options...
Confusionreigns178 Posted September 16, 2020 Share Posted September 16, 2020 I'm no expert on WW2 German aircraft tyres, but were they made by Dunlop? If this has been copied from the NASM example of the Do-335, it would suggest to me that the tyres have been produced in the US and later fitted to the airframe. I'm sure more knowledgeable folk than me can shine some light on this subject. Chris. Link to comment Share on other sites More sharing options...
Halberd Models Posted September 27, 2020 Share Posted September 27, 2020 Hello. As I understand it, we are talking about our sets of Halberd Models. Let me answer all the questions in order. First, Dunlop tires were massively installed on German aircraft during World War II, apparently there is the same story as with Ford cars that were massively in service with the Wehrmacht. Second clearance between tire and rim on Do-335 set. That's quite possible. We were faced with this situation, several modelers wrote that the disc and tire do not sit under tightness. The reason only applies to some of the first sets, since they had a minimum tension when designing, in all new sets this problem was not observed. The reason is that today the company Axsson whose materials we used have been taken over by Sika and it has changed the characteristics of the resin that we used, this material after casting gives a large shrinkage of parts. To date, the material has been replaced and this problem does not exist. We are always open to dialogue and communication. Some modelers contacted us with their problem that after processing they damaged parts or tires, we always went to meet them and changed the damaged parts free of charge. If you have any problems, please write to us, we will be happy to help you. Best regards from Ukraine, Andrey. https://www.shutterstock.com/ru/image-photo/junkers-ju88-airplane-wreck-world-war-60761284 nmayhew and Piprm 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now