Robthepom Posted June 11, 2020 Share Posted June 11, 2020 hello hello, going to be making the Meng Monster D9R I have Eduard interior and exterior sets This will be a present for my niece who works in the mines Box just fits on my work table Ive started with the tracks which are a 3 part process and ok once you get going I have read every build thread on the internet so i knew the tracks are to long, so i plan to extend the track tensioner to take up slack more later Jeff T, Lenny320, chrish and 10 others 13 Link to comment Share on other sites More sharing options...
Jeff T Posted June 11, 2020 Share Posted June 11, 2020 Nice one Rob!...great subject, I really should do this one myself. Cheer's, Jeff. chrish 1 Link to comment Share on other sites More sharing options...
Uncarina Posted June 12, 2020 Share Posted June 12, 2020 (edited) I loved building this beast! And yes, extend the track tensioner, it really helps. Cheers, Tom Edited June 12, 2020 by Uncarina Link to comment Share on other sites More sharing options...
The Madhatter Posted June 12, 2020 Share Posted June 12, 2020 cool subject! I've often been tempted to get one of these. Are you going to make this a civilian one then as mines don't generally need armour? Just on the tracks, are they individually linked? If so, couldn't you save yourself the work of extending the tensioner and just not use a couple of links? I don't know how the tracks are for this kit. If not, then I'll take notes if I decide to buy one for myself Looking forward to seeing what you do with this one Rob Si Link to comment Share on other sites More sharing options...
Uncarina Posted June 13, 2020 Share Posted June 13, 2020 Si, the links are individual, but shortening by one makes them too tight. I replaced the tube section with my own tubing so the distance could be adjusted by sliding. Cheers, Tom Greg W 1 Link to comment Share on other sites More sharing options...
Robthepom Posted June 13, 2020 Author Share Posted June 13, 2020 23 hours ago, The Madhatter said: cool subject! I've often been tempted to get one of these. Are you going to make this a civilian one then as mines don't generally need armour? Just on the tracks, are they individually linked? If so, couldn't you save yourself the work of extending the tensioner and just not use a couple of links? I don't know how the tracks are for this kit. If not, then I'll take notes if I decide to buy one for myself Looking forward to seeing what you do with this one Rob Si As tom says, the tracks are too short with one less link and too long as instructions say. This is the fix i found on the internet, which i really like because it uses the model track tensioner mechanism. 1. Cut the wheel assembly 2. Drill out 8mm hole in each half, insert 8mm rod tube, I considered using 8mm stainless rod or acrylic rod, then i saw a papermate pen it measured at 8mm. So i cut a small section and glued it to a piece of Meng sprue and it was fine, so i added a section in one half 3. Before modification with sag 4 After pushing the tensioner out I looked at the conversion for a civilian one and decided just to do military one, my niece wont mind, I'll tell her the machine gun is for the site managers and engineers I love this kit and the detail, i'll probably get another with slats for myself Thanks for the reference pics Tom Tnarg, F-4Phanwell, dodgem37 and 9 others 11 1 Link to comment Share on other sites More sharing options...
dodgem37 Posted June 13, 2020 Share Posted June 13, 2020 Nice modification. Sincerely, Mark Link to comment Share on other sites More sharing options...
Uncarina Posted June 14, 2020 Share Posted June 14, 2020 Rob, glad to help, and that’s exactly what I did, only you explained it better! Cheers, Tom Link to comment Share on other sites More sharing options...
Troy Molitor Posted June 18, 2020 Share Posted June 18, 2020 What beast of a machine. Thanks for sharing this with us. Link to comment Share on other sites More sharing options...
Robthepom Posted June 22, 2020 Author Share Posted June 22, 2020 Cabin is done just a few pics before i close the last couple walls. The Eduard interior set was used, but to be honest its not worth the money, I didnt use half of the bits. chrish, Uncarina, dodgem37 and 4 others 7 Link to comment Share on other sites More sharing options...
The Madhatter Posted June 22, 2020 Share Posted June 22, 2020 Fantastic weathering there Rob! Looks very well worn. Nice touch with the tear in the seat Link to comment Share on other sites More sharing options...
dodgem37 Posted June 22, 2020 Share Posted June 22, 2020 Love that wear and tear. Great job. Sincerely, Mark Link to comment Share on other sites More sharing options...
Out2gtcha Posted June 22, 2020 Share Posted June 22, 2020 Love it! Link to comment Share on other sites More sharing options...
Uncarina Posted June 23, 2020 Share Posted June 23, 2020 Nice work on the office! And I love the tinted windows that Meng provides. Cheers, Tom Link to comment Share on other sites More sharing options...
Troy Molitor Posted June 23, 2020 Share Posted June 23, 2020 A really cool project going on here. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now