Anthony in NZ Posted November 26, 2020 Share Posted November 26, 2020 Here is a photo Phil Treweek took of NZ5037, I will have a better look tonight. But the blue was very dark Sorry I am not much more help right now KiwiZac 1 Link to comment Share on other sites More sharing options...
Brett M Posted November 26, 2020 Author Share Posted November 26, 2020 23 minutes ago, Anthony in NZ said: Ok, I have just gone through thousands of photo's on my computer and cant find the ones I took of the Dauntless wreck. They must have been on my old film camera, will take a look through those tonight... 13 minutes ago, Anthony in NZ said: Here is a photo Phil Treweek took of NZ5037, I will have a better look tonight. But the blue was very dark Sorry I am not much more help right now Thanks for digging around, especially going though so many photos! From that picture, and the outline on the bars, it might just be typical insignia blue......hmm. Debate time! Anthony in NZ 1 Link to comment Share on other sites More sharing options...
Anthony in NZ Posted November 26, 2020 Share Posted November 26, 2020 Just now, Brett M said: Thanks for digging around, especially going though so many photos! From that picture, and the outline on the bars, it might just be typical insignia blue......hmm. Debate time! That's certainly what it looked like to me in natural light.... Look at photo's of RNZAF (SBD-5's particularly) and you will see they were quite dark Cheers Anthony Brett M 1 Link to comment Share on other sites More sharing options...
Rockie Yarwood Posted November 26, 2020 Share Posted November 26, 2020 Brett, have you seen this from IPMS New Zealand? http://rnzaf.hobbyvista.com/rnzaf_paints.html "(NZ) Roundel Blue: BALM S13-046. 33B/164 (Fs.25056 when fresh - weathered to Fs.35109 > 35190." No pictures, but maybe a starting point... Cheers, Rockie D.B. Andrus 1 Link to comment Share on other sites More sharing options...
Brett M Posted November 26, 2020 Author Share Posted November 26, 2020 1 hour ago, Rockie Yarwood said: Brett, have you seen this from IPMS New Zealand? http://rnzaf.hobbyvista.com/rnzaf_paints.html "(NZ) Roundel Blue: BALM S13-046. 33B/164 (Fs.25056 when fresh - weathered to Fs.35109 > 35190." No pictures, but maybe a starting point... Cheers, Rockie Hey Rockie! Yep, that's the site where I pulled the FS codes yesterday. Since I don't have either of those paints....I may just try the boring old Insignia Blue for now. Still debating! Link to comment Share on other sites More sharing options...
Brett M Posted November 26, 2020 Author Share Posted November 26, 2020 (edited) So, one problem with using Montex and adding raised rivets......the masks won't conform to the rivets well enough. I tried placing the tail number just now and cannot for the life of me get the oramask to stay flush. I have Ventura's decals for the same plane, but didn't really want to go the decal route, especially for the big insignias. Any suggestions on where to get custom Kabuki masks for New Zealand WW2 insignias? EDIT! Surprisingly, they look fine. I did the tail number and it really had no bleed on the edges (LOW air pressure and kept the airbrush completely straight while spraying). I'm happier now, ha! Edited November 26, 2020 by Brett M chukw, Alex, Landrotten Highlander and 12 others 15 Link to comment Share on other sites More sharing options...
Uncarina Posted November 27, 2020 Share Posted November 27, 2020 Brett, Great result and the rivets really set it apart. This is a game changing build! Cheers, Tom Brett M 1 Link to comment Share on other sites More sharing options...
LDSmodeller Posted November 27, 2020 Share Posted November 27, 2020 4 hours ago, Brett M said: Yep, that's the site where I pulled the FS codes yesterday. Since I don't have either of those paints....I may just try the boring old Insignia Blue for now. Still debating! Hi Brett, I've been following along with your build, and just letting you know there is a lot of Misinformation/Perpetuated Myths about WWII RNZAF Roundel colours. Whilst the Paint Colour is made by BALM (British Australian Lead Manufacturers), the colours can never really equate to FS colours, as FS Colour Standard didn't exist in WWII. The other Myth (yes even in Kiwi land) is that RNZAF Roundel faded to some light colour blue. After X amount of Decades in the Rukuhia Aircraft open storage yards yes, but not in the forward operational areas - also bear in Mind that the SBD-5 only served with RNZAF 25 Sqn for a few short Months This SBD-5 Shows the colours are not faded (from RNZAF Museum) (RNZAF Official- RNZAF Museum - used with Permissions) If the RNZAF Roundel did fade, it would look some thing like this on this RNZAF Corsair, as the RNZAF Roundel was painted directly over the US Star The Roundels were kept fairly Fresh by the SU (Servicing Unit) personnel, as a matter of Pride and safety. The closest colour suitable would be WWII RAF Roundel Blue, with Insignia Blue for the Bar surrounds. Caveat to this, is that the Starboard Wing upper and Port wing lower Bar borders would be RNZAF Roundel Blue, not US Insignia Blue (RNZAF Aircraft wore Roundels in six positions) Hope that Helps? Regards Alan PS: I have the Montex masks for My RNZAF SBD-5 KiwiZac, Uncarina, Anthony in NZ and 3 others 5 1 Link to comment Share on other sites More sharing options...
Brett M Posted November 27, 2020 Author Share Posted November 27, 2020 (edited) Thanks Alan! That’s some great info. Interestingly, nothing had called out that the RNZAF had roundels in 6 spots...... I’m wondering if that might have been on the blue grey over light grey scheme only? Edited November 27, 2020 by Brett M Link to comment Share on other sites More sharing options...
LDSmodeller Posted November 27, 2020 Share Posted November 27, 2020 1 hour ago, Brett M said: Interestingly, nothing had called out that the RNZAF had rounders in 6 spots...... I’m wondering if that might have been on the blue grey over light grey scheme only? Hi Brett, Apologies, I should have been a little more specific for the SBD-5's. The 25 Sqn SBD-5's were the only aircraft in RNZAF Inventory that wore the RNZAF Roundel in 4 positions (as in US aircraft) - they were loan aircraft, from USMC/MAG, until the TBF-1c/F4U-1 came to the forward areas. All other RNZAF Aircraft both forward Pacific areas and at home in New Zealand wore roundels in 6 positions (including RNZAF SBD-4's in forward areas) Check out this RNZAF P40 (Gloria Lyons NZ3220) (RNZAF Official - RNZAF Museum - Used with Permissions) RNZAF P40 at Odonga New Georgia (RNZAF Official - RNZAF Museum - used with Permissions) Regards Alan Brett M, Rockie Yarwood, Alex and 3 others 5 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted November 27, 2020 Share Posted November 27, 2020 Now this is just looking LOVELY! The rivets and overall paint really add a layer or interest and realism to it for sure. Brett M 1 Link to comment Share on other sites More sharing options...
Brett M Posted November 27, 2020 Author Share Posted November 27, 2020 8 hours ago, LDSmodeller said: Hi Brett, Apologies, I should have been a little more specific for the SBD-5's. The 25 Sqn SBD-5's were the only aircraft in RNZAF Inventory that wore the RNZAF Roundel in 4 positions (as in US aircraft) - they were loan aircraft, from USMC/MAG, until the TBF-1c/F4U-1 came to the forward areas. All other RNZAF Aircraft both forward Pacific areas and at home in New Zealand wore roundels in 6 positions (including RNZAF SBD-4's in forward areas) Check out this RNZAF P40 (Gloria Lyons NZ3220) (RNZAF Official - RNZAF Museum - Used with Permissions) RNZAF P40 at Odonga New Georgia (RNZAF Official - RNZAF Museum - used with Permissions) Regards Alan Hey Alan! More great info and thanks for the clarification on 25 Sq. Interesting schemes in the pictures you posted, with the lines coming off the insignia. Walk ways maybe? the P40 in the last picture at right, some very pale or white paint on the tail! Thanks again for the help, shopping for more MRP now Brett Link to comment Share on other sites More sharing options...
LDSmodeller Posted November 27, 2020 Share Posted November 27, 2020 5 hours ago, Brett M said: Interesting schemes in the pictures you posted, with the lines coming off the insignia. Walk ways maybe? the P40 in the last picture at right, some very pale or white paint on the tail! Hi Brett, The White Stripes and Tails were for Identification purposes, as the P40 bore (at a distance) a similar plane form to the Japanese Ki 61 Hien (Tony) Regards Alan Brett M and Rockie Yarwood 2 Link to comment Share on other sites More sharing options...
Woody V Posted November 27, 2020 Share Posted November 27, 2020 On 11/26/2020 at 3:50 PM, Brett M said: Surprisingly, they look fine. I did the tail number and it really had no bleed on the edges (LOW air pressure and kept the airbrush completely straight while spraying). I'm happier now, ha! Another ball dropped by me. I was meaning to tell you about masking over rivets but it looks like you found out by yourself. My first masking attempt was on the Revell FW190 F8 and the swastika on the vertical stab is painted over a rather prominent hinge, but using low pressure and keeping the airbrush perpendicular to the surface is the trick. Now my dilemma is painting those huge national insignias over the wing slats on my build. I might even try painting them on clear decal film and seeing how that works. I really don't want to use AM decals because I want the colors faded. Rockie Yarwood, Anthony in NZ and Brett M 3 Link to comment Share on other sites More sharing options...
Brett M Posted November 27, 2020 Author Share Posted November 27, 2020 1 hour ago, Archer Fine Transfers said: Another ball dropped by me. I was meaning to tell you about masking over rivets but it looks like you found out by yourself. My first masking attempt was on the Revell FW190 F8 and the swastika on the vertical stab is painted over a rather prominent hinge, but using low pressure and keeping the airbrush perpendicular to the surface is the trick. Now my dilemma is painting those huge national insignias over the wing slats on my build. I might even try painting them on clear decal film and seeing how that works. I really don't want to use AM decals because I want the colors faded. Nah, no ball dropped. I just forgot about oramask and it's limits till I pulled them out of the box. Kabuki, no problem! At least we both came to the same solution I'm wondering the same for my wings and the insignias as well. While I wait on paints to arrive, I can dwell on it Woody V 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now