Anthony in NZ Posted February 15, 2020 Author Share Posted February 15, 2020 14 minutes ago, thierry laurent said: This looks to be a nice kit. If I'm not that interested in the Andover, I would not resist to an electronic warfare JSDAF YS-11EA or EB... So, if you're finally aware of such a release, please ring the bell! Thierry Will do mate! thierry laurent 1 Link to comment Share on other sites More sharing options...
seiran01 Posted February 15, 2020 Share Posted February 15, 2020 Talked with a mate of mine who isn’t on LSP, he’d likely jump at a ys-11 cargo bird Link to comment Share on other sites More sharing options...
Iain Posted February 15, 2020 Share Posted February 15, 2020 Hmmm - used to see 115 Sqn calibration aircraft all the time... Some nice images here: https://forums.airshows.co.uk/viewtopic.php?f=40&t=29115 Edit: Crikey - he's done the Handley Page HP.42 and Short L.17 Scylla in 1:48 - I wonder if he'd ever consider scaling those - especially the HP.42!!! Iain Jan_G 1 Link to comment Share on other sites More sharing options...
Landrotten Highlander Posted February 15, 2020 Share Posted February 15, 2020 (edited) Would be nice if I could see his work other then attempting to use farcebook or fleabay. can anyone pm me his contact details or link me to a useful website where I can make contact re some of his other kits in 1:48? Edited February 15, 2020 by Landrotten Highlander Stevepd 1 Link to comment Share on other sites More sharing options...
Iain Posted February 15, 2020 Share Posted February 15, 2020 From his Ebay account: Short L.17 Scylla Handley Page HP.42W Others can be seen here. HTH, Iain Stevepd 1 Link to comment Share on other sites More sharing options...
seiran01 Posted February 15, 2020 Share Posted February 15, 2020 They’re 3d printed on an FDM (plastic) printer, the main drawback is that you need to do surface prep to smooth out the surfaces which will be time consuming on a model this large. My friend has one of the models this guy has printed and it actually looks a lot nicer than I was expecting it to. Still a lot of work, but a very solid model Stevepd and Iain 2 Link to comment Share on other sites More sharing options...
Landrotten Highlander Posted February 15, 2020 Share Posted February 15, 2020 20 minutes ago, Iain said: From his Ebay account: Short L.17 Scylla Handley Page HP.42W Others can be seen here. HTH, Iain I tried to set up an EBay account to sell some of my un-wanted kits (all non LSP) and within 10 minutes my account was suspended 'becausse of my browse history). Needles to say I will no longer even consider doing business through that site. Link to comment Share on other sites More sharing options...
Iain Posted February 15, 2020 Share Posted February 15, 2020 I didn't say you had to do business there - but the links I posted will give you lots of images... Iain Link to comment Share on other sites More sharing options...
thierry laurent Posted February 15, 2020 Share Posted February 15, 2020 Here is his website: http://one-man-model.main.jp/ It looks he has the YS-11EB in his catalogue! Iain 1 Link to comment Share on other sites More sharing options...
Kagemusha Posted February 15, 2020 Share Posted February 15, 2020 I flew in an Andover back when in the Air Cadets, we were based at Brize for a week summer camp, that was a calibration flight. Iain 1 Link to comment Share on other sites More sharing options...
Stevepd Posted February 15, 2020 Share Posted February 15, 2020 ETPS Boscombe Down is what I’m thinking. I’ve done a 1/72 version some years ago now. It was on display in the Salisbury model centre. Somebody wanted to reverse engineer it to make a mould but I couldn’t let them do it. It’s now intact in the BD Museum at Old Sarum. Iain 1 Link to comment Share on other sites More sharing options...
Anthony in NZ Posted February 15, 2020 Author Share Posted February 15, 2020 6 hours ago, Landrotten Highlander said: Would be nice if I could see his work other then attempting to use farcebook or fleabay. can anyone pm me his contact details or link me to a useful website where I can make contact re some of his other kits in 1:48? Tomorrow when I have a final number (3 so far) I will email him with you and Mike copied in. So we can discuss the kit in 1/32. He is looking for details of the kneeling set-up on the main undercarriage and rear cargo bay details as he wants to add a lot more detail in this kit. Cheers Anthony Landrotten Highlander, Stevepd and Kagemusha 3 Link to comment Share on other sites More sharing options...
Mark_C Posted February 16, 2020 Share Posted February 16, 2020 The man seems to do good, thorough instructions: https://www.scalemates.com/products/img/9/7/4/1114974-98-instructions.pdf Very nice kits . . . Stevepd 1 Link to comment Share on other sites More sharing options...
Iain Posted February 16, 2020 Share Posted February 16, 2020 OK... I've slept on it. I've taken advice from someone that has a few of these kits - taken advice from a good friend that's a bit of a 3D print expert - searched the web for photo's/schemes - realised there's an Andover on display at RAF Cosford - revisited the xe.com currency converter a few times - checked bank balance. These aircraft have a long association with where I live - Oxfordshire - and entered service the year I was born - so the tea-leaves are in alignment - perhaps. I'm in - as long as costs don't go up (exchange rate fluctuations excepted). Could make a stunning model - either 115 Sqn - or ETPS - if my skills are up to it. Got to be easier than a vac-form - and I'm not a big fan of complete resin kits - this will be something new for me, and the CAD shapes do look good. But would much prefer it all printed in HIPS rather than ABS. Don't need anything in way of markings - just the printed parts. So - 4 kits now? A mini Group Build perhaps, so we can crack on and encourage each other - rather than have them as loft insulation? Sending PM Anthony. Iain thierry laurent, Landrotten Highlander, Stevepd and 2 others 3 1 1 Link to comment Share on other sites More sharing options...
thierry laurent Posted February 16, 2020 Share Posted February 16, 2020 Hi Anthony, In your mail, can you also mention that someone is interested in a 1/32 YS-11EB? Thanks in advance! Thierry Anthony in NZ 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now