Marcel111 Posted November 1, 2019 Share Posted November 1, 2019 Hi guys, my next project is likely to be a Desert Storm A-6E of VA-65 (although a MiG-29C is also beckoning). I will be loading this bomber up heavily, the outside pylons will have 12 Mk7’s on MER’s. I am thinking of adding another 10 Mk82’s on the inside pylons, which would be in line with a loadout stated on desert storm.eu. I have no knowledge of the fuses used, looks like the conventional types used for decades before were often on, I would prefer to use those kinda conical ones and ideally no fuse wires either. Thanks for any intel. Cheers, Marcel Link to comment Share on other sites More sharing options...
Finn Posted November 2, 2019 Share Posted November 2, 2019 (edited) Marcel, if you don't want to add arming wires you can put the M k 43 Target Detecting Devices for the nose fuze: http://www.tpub.com/aviord321/9.htm here is a A-7E with them: Jari Edited November 2, 2019 by Finn Marcel111 and Dragon 2 Link to comment Share on other sites More sharing options...
Marcel111 Posted November 2, 2019 Author Share Posted November 2, 2019 Thx Jari, should have known that I could count on you with that kind of insight! Which is a exactly what I was looking for. Cheers, Marcel Dragon 1 Link to comment Share on other sites More sharing options...
Collin Posted November 5, 2019 Share Posted November 5, 2019 Don't know if the A-6's used MK43's in DS1. A-7's yes. Most photo evidence shows either solid nose plugs or M904 fused MK-82's for A-6 squadrons. Finn, if you have anything regarding VT fuses in DS1 for Intruders.....I might build that loadout as well (or I may just do a USMC Intruder with CBU and GBU-12's). Collin Marcel111 1 Link to comment Share on other sites More sharing options...
Finn Posted November 5, 2019 Share Posted November 5, 2019 From the USS Ranger cruise book: https://www.navysite.de/cruisebooks/cv61-91/011.htm just sitting on the deck but the carrier had two A-6 squadrons on board, and the only other asset that carried any air to surface weapons was a S-3 squadron so it might be fair to say the A-6 did have them. Jari Link to comment Share on other sites More sharing options...
Collin Posted November 6, 2019 Share Posted November 6, 2019 No way S-3’s carried those nose fuses, we were strictly M904. Good catch on the photo and the logic sounds good. Need to keep digging because a photo photo of a full MER loaded with the green nose fuses would look cool. Cheers Collin Link to comment Share on other sites More sharing options...
Collin Posted November 6, 2019 Share Posted November 6, 2019 Lower left pic. Looks like the were used on Snakeye MK-82’s. Here we go. Single Snakeye -82 parent station with the green nose VT fuse. Might be a SuCAP loadout for max frag above the water. Time to do some more digging. Cheers Collin Link to comment Share on other sites More sharing options...
Collin Posted November 6, 2019 Share Posted November 6, 2019 Research pays off. The reason you don’t see multiple stores on a TER or MER with MK43 TDD nose fuses is because it’s not allowed due to the potential for mutual interference. Can’t seem to copy the reference here but it’s in the book. This makes sense since you see the A-6 above loaded out single store/parent rack. Same for the A-7 photo, MK-83’s with the 43 TDD single store/parent rack. So it looks like a full MER of MK43 TDD green nose fused MK82’s is not allowed...by the book. Now there is a photo of a DS A-7 carrying a MER with green noses. I’m skeptical those are 43 TDD’s since the white nose cone “dot” isn’t the same as the nose of a MK43 TDD. Researching what those are. See below: Time for bed. Cheers Collin Marcel111 1 Link to comment Share on other sites More sharing options...
Marcel111 Posted November 7, 2019 Author Share Posted November 7, 2019 Big thanks guys, this has been very helpful and informative. I will go with the regular fuses. Any relevant close ups of the wiring? I can never make it out on pics and when done on models it often seems heavy-handed. Cheers, Marcel LSP_K2 1 Link to comment Share on other sites More sharing options...
Dave Roof Posted November 8, 2019 Share Posted November 8, 2019 On 11/5/2019 at 8:58 PM, Collin said: Research pays off. The reason you don’t see multiple stores on a TER or MER with MK43 TDD nose fuses is because it’s not allowed due to the potential for mutual interference. Can’t seem to copy the reference here but it’s in the book. This makes sense since you see the A-6 above loaded out single store/parent rack. Same for the A-7 photo, MK-83’s with the 43 TDD single store/parent rack. So it looks like a full MER of MK43 TDD green nose fused MK82’s is not allowed...by the book. Now there is a photo of a DS A-7 carrying a MER with green noses. I’m skeptical those are 43 TDD’s since the white nose cone “dot” isn’t the same as the nose of a MK43 TDD. Researching what those are. See below: Time for bed. Cheers Collin Those are Mk-43's. They're the only item that was that color green. The silver tip is the striker rod. Link to comment Share on other sites More sharing options...
Collin Posted November 8, 2019 Share Posted November 8, 2019 1 hour ago, Dave Roof said: Those are Mk-43's. They're the only item that was that color green. The silver tip is the striker rod. Thanks Dave. I’ve got the manual warning not to put the TDDs on MER/TER because of MI when dropped. Asked Gerry if there was an exception for the A-7 or was it just the way you had to set up the release spacing. I never used TDD fuzes, FMU-140 was the fanciest I ever got. Have you ever seen or loaded up MERs with MK43 fused slick or SE -82’s during your time? I’ve looked but have come up empty. Cheers Collin Link to comment Share on other sites More sharing options...
Dave Roof Posted November 8, 2019 Share Posted November 8, 2019 Collin, Didn't load any, but built a crap load of them during ODS. I've got a few friends that were with 224 and 533 ordnance during DS. I'll ask and see if they have any photos or recollection. Dave Link to comment Share on other sites More sharing options...
Collin Posted November 8, 2019 Share Posted November 8, 2019 Dave: do you know if Harriers used those TDD fused MK82’s during DS1? Might do a mixed MK20/MK82 -43 fused bomb load on my planned 1/32 Harrier test bird. Cheers Collin Link to comment Share on other sites More sharing options...
Dave Roof Posted November 10, 2019 Share Posted November 10, 2019 On 11/8/2019 at 5:46 PM, Collin said: Dave: do you know if Harriers used those TDD fused MK82’s during DS1? Might do a mixed MK20/MK82 -43 fused bomb load on my planned 1/32 Harrier test bird. Cheers Collin Not sure, all of the Harriers were up in Saudi. We were in Bahrain. Also, all of the photos I do have only show M904 fuzed 82's, as well as 82's with nose plugs. Another awesome configuration I have photos of is similar to the one below, but both outboard stations have AGM-65E Mavericks. Kagemusha 1 Link to comment Share on other sites More sharing options...
Kagemusha Posted November 10, 2019 Share Posted November 10, 2019 Do you know what the thing is on the centerline rack Dave? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now