A6M Posted December 4, 2019 Share Posted December 4, 2019 Almost forgot to again mention the need to replace the old style Oxygen Supply Regulator Ryan Madmax, Antonio Argudo and nmayhew 2 1 Link to comment Share on other sites More sharing options...
Madmax Posted December 4, 2019 Author Share Posted December 4, 2019 Thanks Ryan, I would have messed that up if it weren't for your keen eye. I misunderstood the Tamiya instruction about not using the stand, and simply forgot to replace the oxygen regulator! Back to the workbench... Link to comment Share on other sites More sharing options...
Antonio Argudo Posted December 4, 2019 Share Posted December 4, 2019 great build, amazing attention to detail, just saw this on ebay, quite interesting to this subject, cheers https://axis-militaria.com/product/ww2-imperial-japanese-navy-aluminum-aircraft-paint-chips-a6m-zero-nice/ Madmax 1 Link to comment Share on other sites More sharing options...
A6M Posted December 5, 2019 Share Posted December 5, 2019 Sean, glad to help out. I'll keep watching and suggesting as long as you allow me to. Those paint chips look to be a little on the pricey side. Only two of them are original pieces and only one is an example of the exterior colour - I'm not so sure I want to pay US $499.99 for such a sample. The others are applications of modern paint onto aluminum squares and basically appear to provide the same colours that anyone can find referenced in a number of print and online sources. Just to further confuse the issue, the provided history of A6M3 32 c/n 3148 is not entirely accurate. The Sterlings recovered several Zero wrecks and the A6M3 32 with the c/n 3148 consisted only of the forward fuselage and wings. From a 6 November 1943 roster of the 252 Kokutai it is known that 3148 had the earlier tail code of Y2-121 which was then replaced by 52-130. The rear portion of this recovered Zero was from another A6M3 - c/n 3145. It has the very early tail code of S-112 (Chitose kokutai), then Y2-128, and last of all 52-133. It also had a fuselage HKK number of 9(?)0 (the middle number is unknown). I know I'm being rather pedantic here - but for $500... Ryan Antonio Argudo, Shiba and Madmax 3 Link to comment Share on other sites More sharing options...
Antonio Argudo Posted December 5, 2019 Share Posted December 5, 2019 yes overpriced, it was sold out anyway, I posted it as a reference colors only, cheers Link to comment Share on other sites More sharing options...
A6M Posted December 6, 2019 Share Posted December 6, 2019 I see what you mean as a reference. Some of the chips are pretty good in this regard. But the price! I sure wonder who has the money for such a purchase? Ryan Antonio Argudo 1 Link to comment Share on other sites More sharing options...
Madmax Posted December 6, 2019 Author Share Posted December 6, 2019 (edited) On 12/4/2019 at 5:55 PM, Antonio Argudo said: great build, amazing attention to detail, just saw this on ebay, quite interesting to this subject, cheers Thanks Antonio! Those colour chips are very cleverly presented, and I would certainly be one for taking a second look if it were at an antique dealer's store. I actually find it really interesting how people from all over are making money from airplane wreckage and artefacts. Your reaction to the price is interesting Ryan, as I'm sure you have seen many opportunists in your time. I have some progress to report on in the meanwhile. In preparing to fire up the compressor, I discovered a couple of neglected tasks, like the assembly of the machine guns. I replaced the barrels with the lovely MASTER brass ones. Then I got down to modifying the oxygen supply regulator. One has to cut out the old regulator, and repair the tubular cross member that it is mounted on. I used a section of hypodermic needle for this, and then fixed up the side where I removed the new regulator from its original part on the A6M5 instrument panel frame. The arrow points to some styrene I added to the top section in order to be able to drill more lightening holes... Since Ryan pointed them out on this part of the instrument panel, I couldn't resist the temptation. The kit part really is just too thin on its own. The IP looks more like it now. I have also removed the offending dynamo's from the lower fuselage. Then I got stuck into some paint. I really enjoy the notion of the Aotake protective layer that is applied directly onto the aluminium, as it has a very pleasing visual effect (as mentioned previously, I paint the surface with Alclad's White Aluminium, and then apply a coat of Tamiya clear blue and green, mixed roughly half/half). The reference photo in the background is one of Ryan's that he took of the Blayd Zero back in 1999 (from the j-aircraft website). Hope you don't mind Ryan, just getting a feel for how much green to add to the mix. As soon as that is dry, I will try and mix some FS 34097... Sean Edited December 6, 2019 by Madmax missing word jgrease, Cheetah11, TAG and 5 others 7 1 Link to comment Share on other sites More sharing options...
Uncarina Posted December 6, 2019 Share Posted December 6, 2019 Great work as usual, and you are really bringing this kit to a new level. I also like seeing the how your Aotake mix turned out. Cheers, Tom Madmax 1 Link to comment Share on other sites More sharing options...
A6M Posted December 6, 2019 Share Posted December 6, 2019 Sean, that background photo sure brings back memories. I had just been online a few months when I came across Blayd's website. Blayd was/is located in Carman MB, just an hour drive from where I live, so I phoned to see if I could have a tour. Earl, the owner of Blayd, was very generous with his time and I got a good look at both the Zero being constructed as well as his collection of salvaged parts. I asked how Earl how he was going to paint the plane and he said he had no plans in place yet; so I offered to put together a painting manual in exchange for being able to catalog all his artifacts. It sounded like a good winter project. How wrong I was, it took 3 years to get everything detailed. Fortunately I was helped extensively by Jim Long who sent me about 3 linear feet of photocopies culled from the USAF archives in Alabama. In 2016 the plane was damaged in a prop strike incident. You can see the damage below along with the offending Corsair in the background. After the rebuilding of the rear fuselage the plane was repainted. The up-side of the repair work was I that got to correct the errors I had made in the first painting. (All but the cockpit - if I had to do it all again the cockpit would be a darker green). Below is a pic of applying markings on a 1:1 scale build. Ryan Landrotten Highlander, Alain Gadbois, dennismcc and 5 others 8 Link to comment Share on other sites More sharing options...
One-Oh-Four Posted December 6, 2019 Share Posted December 6, 2019 On 12/2/2019 at 5:24 PM, Madmax said: Thanks for looking in Tom. Ryan, this is an interesting insight and reflection on your part. It is quite amazing to me how much energy is devoted to finding the correct colours for historic aircraft the world over. I have been involved in the RLM debate for some time, primarily over the Me-262 in our Military History Museum in Johannesburg, and thus understand some of the complexities involved. I will go with your new take on the cockpit colour - being the more commonly occurring one. Thank you. I am almost at the paint stage, so this is very timely information. I have now gone back to step one in the instructions, and based on One-Oh-Four's experience https://forum.largescaleplanes.com/index.php?/topic/79890-mitsubishi-a6m2b-zero-132-tamiya/&tab=comments#comment-1120875 came up with some slightly different solutions. As luck would have it, the two Eduard etch sets I bought for this kit are the Type 21 Landing Flaps (which it appears was a waste since they are hardly ever open), and the Type 21 Exterior that may prove useful, but the interior set would have been super useful. Bad luck. I eventually resorted to making this equipment shelf from thin styrene, using the kit part as a template. Here it is in place, along with one of the braces behind the large fuselage frame to which the seat is mounted. I am only putting in detail that I can see when looking into the rear fuselage over the seat. What is interesting is how much can actually be seen, as it is quite a spacious cockpit. On the other side, I separated the dual CO2 bottles and sanded one into shape - removing its base holder. This was then mounted onto fittings that I shaped and drilled from thick styrene strip. Two other obvious furnishings in this area are the bracket to hold control cable pulleys (on the left), and a spring loaded guide for a hand hold. It has a domed disk over it to protect the inflating flotation bladder mounted in this part of the fuselage. Many of the kit mouldings are beautifully done, but are easily improved by adding detail. This former has no lightening holes in the interior face of the structure, so I drilled them out. On the second photo you can see them pointed out. The recess for the stand mounting was slightly modified to hide it, along with punched discs to fill the ejector pin holes. With the battery and compressed air bottle in place, the lower fuselage part of the wing looks better now. The instrument panel is very finely moulded, and I only drilled out the mountings to add some detail that look like the rubber mountings and bolts. The clock is removed in order to be part of the cool crowd! Looking into the aft fuselage now makes me feel like a warbird restorer! Cheers, Sean Hi Sean, great WIP! I have downloaded your photos to help me along when I return to my Zero! At this moment I'm fully immersed in Z-M's Henschel Hs 129B-2. Your progress surely does inspire me! Cheers, Erik. Madmax 1 Link to comment Share on other sites More sharing options...
dodgem37 Posted December 6, 2019 Share Posted December 6, 2019 This is Dy-no-mite! Late to this party. My apologies. I read the Sakai book eons ago. What I remember from way back in the day, sometime in the 60's, was that an aspect of a pilots' training was to look for stars during daylight. I've got to catch up on this. Thank you. Sincerely, Mark Troy Molitor and Madmax 2 Link to comment Share on other sites More sharing options...
Madmax Posted December 29, 2019 Author Share Posted December 29, 2019 On 12/6/2019 at 3:14 PM, Uncarina said: Great work as usual, and you are really bringing this kit to a new level. I also like seeing the how your Aotake mix turned out. Cheers, Tom Thanks Tom. I see that you are now also consumed by a Japanese subject, and doing a great job of it! On 12/6/2019 at 10:56 PM, One-Oh-Four said: Hi Sean, great WIP! I have downloaded your photos to help me along when I return to my Zero! At this moment I'm fully immersed in Z-M's Henschel Hs 129B-2. Your progress surely does inspire me! Cheers, Erik. Hi Erik, you are not alone in the Z-M immersing! I don't own one yet and after seeing so many builds on the forum, have developed a severe case of FOMO On 12/6/2019 at 11:42 PM, dodgem37 said: This is Dy-no-mite! Late to this party. My apologies. I read the Sakai book eons ago. What I remember from way back in the day, sometime in the 60's, was that an aspect of a pilots' training was to look for stars during daylight. I've got to catch up on this. Thank you. Sincerely, Mark Thanks for adding to the fun Mark - what a wonderful book cover! It's hard to make out the name, but the artist is Ed Valigursky who was a prolific pulp fiction illustrator and later more serious about space and aviation history. When looking it up, I was amazed at just how many different covers there are for "Samurai", and therefore how many times it has been re-printed. Clearly a remarkable story. Looking for stars during daylight conjures up the "wax on, wax off" image from "The Karate Kid"... On 12/6/2019 at 8:05 PM, A6M said: Sean, that background photo sure brings back memories. I'm sure it does Ryan. The Blayd Zero is an incredible achievement, and a testament to the skill of everyone involved in successfully re-manufacturing such an iconic fighter. You are quite fortunate to have been involved in the project - Twice! Uncarina 1 Link to comment Share on other sites More sharing options...
Madmax Posted December 29, 2019 Author Share Posted December 29, 2019 I have slowly been progressing inside Jiro Horikoshi's lightweight fuselage design. Instrument panels in 1:32 scale present some difficulty. They are just big enough to make one think that they could look real, but in reality being just too small to do it yourself at home. Macro photography doesn't help much when looking at the thing you baked vs a finely manufactured or printed IP. At least Tamiya mould the actual panel very finely, but the method of using instrument decals behind the equivalent of four inches of glass makes them look like myopic cartoon characters. I sanded the clear part quite a bit thinner at the back, and smoothed the round dial faces hoping to get the instruments to look a little less far away. I got it a bit wrong with the first three instruments in the side console and had to resort to this fix which I'm sure many are familiar with. Decals on top for this one. This led to an interesting experiment. I used photographs of actual Zero instruments to make decals, and see how they turned out compared to the kit decals. Not very well as you might be able to tell - too pixellated. That's the snag with an average printer and a 2mm diameter instrument, just too small. I will have to make friend in the printing business. Undeterred, I then tried my hand at miniature etching. There are etched data-plates on the sides of the cockpit to remind pilots how to transfer fuel and use the gear and flap levers in failure cases (I assume). I used some thin silver plated etched brass plate from my spares-box, which I scribed in a vague approximation of the layout drawings. Sadly a light sanding took the silver off, so the brass plate will have to suffice. Mixing Ryan's suggested Nakajima interior colour was next. FS 34097 seemed like good middle ground between the findings, and also ties in with what "Straggler" suggested on the "Aviation of Japan" website. I looked at many colour chips for the FS number, as well as taking heed of the other interpretations. In essence the mix came down to, believe it or not, Tamiya's XF-71 COCKPIT GREEN (IJN) / XF-66 LIGHT GREY (actually a medium grey) / XF-67 NATO GREEN and some XF-2 WHITE to taste. This photo is on a white background to get a feel for the darkness of the shade. Against my preferred dark-grey background it shows up lighter than it actually appears. There are many detailed pieces to the cockpit and fuselage interior, which make the Tamiya kits so desirable. Now the assembly can begin. One can't help but marvel at the engineering to create the 3-dimensions of the cockpit parts. I have added little chopped up decals from other kits to tray and replicate the placards that are all over the Zero. Your decal sheet will be very helpful in future Ryan. The various bottles are now in place and plumbed. The piping may have been brass for some of the bottles, but I am sticking with this silver simply because it won't chip off where I can't touch up when assembling the whole thing. As Ryan points out, the machine guns would be "Parkerised", not gloss black. I used Humbrol Metal Cote gun metal. You really can't see this fuel tank by the way! The seat got HGW belts, and the frame supported by styrene rod bungee cord. Finally for today, the IP. I am happy with it, but one day I will get those instrument photographs finely printed... LSP_Kevin, nmayhew, Trak-Tor and 10 others 13 Link to comment Share on other sites More sharing options...
Cheetah11 Posted December 29, 2019 Share Posted December 29, 2019 (edited) Great work on the IP and the rest of the cockpit Sean. The one trick you could try on the instruments is to photograph them on slide film (if you could still get some ) and paint it white on the reverse side. Color slide is not negative so no need to reverse the image. Cheers Nick Edited December 29, 2019 by Cheetah11 Madmax 1 Link to comment Share on other sites More sharing options...
Uncarina Posted December 29, 2019 Share Posted December 29, 2019 (edited) Another great installment Sean! Your build thread has been a gold mine of information. Now I have to extract my stalled build to see what I can do to augment the many details I missed! Cheers, Tom Edited December 29, 2019 by Uncarina Madmax 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now