rammstein Posted February 11, 2020 Author Share Posted February 11, 2020 hello all, making a new pedestal for the 40mm bofors gun, cut some disks and turn them on my lathe glue them together and a new pedestal is born placed in the tub, look also making of a handrail, and placing more brackets inside enjoy, Rammstein D.B. Andrus, Trak-Tor, USMC Herc and 5 others 8 Link to comment Share on other sites More sharing options...
AlbertD Posted February 12, 2020 Share Posted February 12, 2020 Modeling at it's finest. Beautiful work. rammstein 1 Link to comment Share on other sites More sharing options...
dodgem37 Posted February 12, 2020 Share Posted February 12, 2020 Who's Bofors will you be using? There are so many from which to choose. Thank you. Sincerely, Mark Out2gtcha 1 Link to comment Share on other sites More sharing options...
rammstein Posted February 15, 2020 Author Share Posted February 15, 2020 hello all, @dodgem37 I used Italeri's 40mm bofors, of the PT boat conversion set updated with Aber parts Finally I placed all the brackets for the 40mm ammo, handrail not completely done, have to cast some supports some 40mm ammo cast enjoy, Rammstein Trak-Tor, USMC Herc, Out2gtcha and 6 others 9 Link to comment Share on other sites More sharing options...
chrish Posted February 15, 2020 Share Posted February 15, 2020 Nice! rammstein 1 Link to comment Share on other sites More sharing options...
D.B. Andrus Posted February 16, 2020 Share Posted February 16, 2020 Beautiful work...especially casting the Bofors ammo clips. Cheers, D.B. Out2gtcha and rammstein 1 1 Link to comment Share on other sites More sharing options...
rammstein Posted February 20, 2020 Author Share Posted February 20, 2020 hello all, have done some work on the chain pipes for the anchor drill some holes and placed some tubing in it and sand them made the hole covers, tubing cut under the correct angle and sanded and detailled them all the items to make a brake wheel for the anchor glued together placed on de LSM, together with the baseplate for the capstan now I will be making the capstan enjoy, Rammstein Vandy 1 VX 4, Derek B, LSP_Kevin and 5 others 8 Link to comment Share on other sites More sharing options...
Barry Posted February 20, 2020 Share Posted February 20, 2020 Fantastic scratch building sir! This is going to be a truly impressive model. Barry Link to comment Share on other sites More sharing options...
rammstein Posted February 20, 2020 Author Share Posted February 20, 2020 hello all, Thanks all for the kind replies, making of the capstan, all the disks for making a capstan turned on my lathe to the right dimensions also the anchor and chain all the pieces put together, there are some more pieces I have to make placed on the LSM with anchor chain the anchor in place overall view of anchor , capstan , chain, brake wheel that is all for today, enjoy Rammstein Derek B, easixpedro, D.B. Andrus and 8 others 11 Link to comment Share on other sites More sharing options...
Out2gtcha Posted February 20, 2020 Share Posted February 20, 2020 Most excellent! The incredible small details are amazing! rammstein 1 Link to comment Share on other sites More sharing options...
LSP_Kevin Posted February 20, 2020 Share Posted February 20, 2020 Wow! Kev Link to comment Share on other sites More sharing options...
themongoose Posted February 22, 2020 Share Posted February 22, 2020 Beautiful work! I can't get enough of this build and how clean it is as you go along. You have some serious attention to detail there :-) rammstein 1 Link to comment Share on other sites More sharing options...
rammstein Posted February 24, 2020 Author Share Posted February 24, 2020 hello all, small up-date, making of a block single sheave place on the portable mast mast placed on the bow, starboard side, included navigation lamps, top and halfway enjoy Rammstein Lothar, D.B. Andrus, Derek B and 5 others 8 Link to comment Share on other sites More sharing options...
rammstein Posted February 25, 2020 Author Share Posted February 25, 2020 hello all, today I have made one of 4 fire plugs, these are all the parts for making one all the parts together and one more in the making placed one on deck, some fine detailling still to do from above 2 more to go, still working on the bow doors, have to recast everything, the curve was not correct. enjoy, Rammstein F-4Phanwell, jimbo, Out2gtcha and 6 others 9 Link to comment Share on other sites More sharing options...
Out2gtcha Posted February 25, 2020 Share Posted February 25, 2020 Great work! I really enjoy these updates very much rammstein 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now