Jump to content
jimbo

HK B-25J as "Vestal Virgin"

Recommended Posts

Greetings all;

 

Here is my contribution to the MEGB, the HK Models B-25J as "Vestal Virgin" from the film Catch-22. I'm not going crazy with AM stuff, just the "necessities" for this big gal, mainly the G-Factor bronze landing gear legs, and I have an extra set of Master B-17 .50-cal barrels to use in place of the kit plastic. Also a set of Eduard masks for all that glass. The KitsWorld decals will be ordered later today. Photos:

 

The obligatory box shot:

 

42PJhC.jpg

 

The AM goodies:

 

sdJirR.jpg

 

I don't yet have the decals on hand, but here are some images from the KitsWorld website, my thanks to them for that:

 

1rV4K9.jpg

 

c96w57.jpg

 

Also, I'm well aware of the propeller blade shape issues. I'm pretty happy that I think the perfect solution dropped in my lap when the HK Lancaster arrived. It has what, to me, look like near-perfect prop blades. Here's a photo to show the comparison:

 

p933Sg.jpg

 

I'd like very much to hear others' opinions of using the spare prop blades from the Lanc kit. The butt ends are not the same but that doesn't worry me, I'll pin them. A better solution for me than resin props.

 

Thanks for checking in and let the fun begin!

 

Jim "Jimbo" Harr

High Bridge, NJ

Edited by jimbo
Photo-insertion learning curve. Macintosh learning curve!!

Share this post


Link to post
Share on other sites

heya Jim, not sure about the props but if they look better to you and are the right diameter I say go for it.

Assuming the B25 kit props are on the top, the Lanc ones look way better to me too!

Share this post


Link to post
Share on other sites
5 minutes ago, Shawn M said:

heya Jim, not sure about the props but if they look better to you and are the right diameter I say go for it.

Assuming the B25 kit props are on the top, the Lanc ones look way better to me too!

 

Haha yes Shawn the top ones are the included blades from the B-25. The length of the Lanc blades, once the butt-ends are trimmed (they have different mounting lugs) are within 1/2 mm (.020”). Works for me! Thanks for looking in. 

 

Jimbo

Share this post


Link to post
Share on other sites

Thanks Dan, thanks Carl. I use resin parts sparingly now, on account of chemical allergies. Never say never but hey, they’re already here so I’ll try the styrene blades!

 

Jimbo

Edited by jimbo
Signature

Share this post


Link to post
Share on other sites

Had a bit of a shopping spree when i ordered the decals; I couldn't resist the Eduard cockpit and nose interior color PE. Nice sets. Got the decals as well. And surprised myself with the resin wheels from squadron; I forgot I ordered them (I blame the Pinot Noir). Don't know why, the kit wheels look fine to me...

 

FCpkb7.jpg

 

Some reference materials ;-)

 

aDNyVE.jpg

 

And I have jumped in to begin construction; this is my first HK build, I like the plastic so far, very nice. Worked on the R-2600 engines, removing the offending second set of pushrod rubes.

 

PBSPy0.jpg

 

DxhkXb.jpg

 

Thanks for checking in!

 

Jimbo

Share this post


Link to post
Share on other sites

Nice organization Jimbo, my desk gets so cluttered during builds I could use some of those plates.

 

Ryan

 

PS seeing all these prop fixes I guess I should replace mine....sigh

Share this post


Link to post
Share on other sites

Thank you Ryan, and Håkan! Don’t let those trays of parts fool you, my shop is a disaster and that’s the only way I can keep things straight :lol:

 

I’m slowly chipping away; here are the engines coming together, still lacking wiring, rocker covers, more painting and weathering:

 

ENlv9M.jpg

 

Thanks for looking in!

 

Jimbo

Share this post


Link to post
Share on other sites

Slow, incremental progress. Not a lot of personal bench time unfortunately. But I do manage to steal away a bit of time here and there. I’m enjoying everyone else’s builds of course! But here’s a little bit of progress, engines ready for rocker covers and exhausts, cowlings coming together.

 

JajYmr.jpg

 

Jimbo

Share this post


Link to post
Share on other sites

Lovely looking engines Jimbo. If you are putting on the cowl panels, you won't see the rear set of rocker covers and can leave them off if you want. 

 

One thing I ran into on my two is the reduction gear cover. They're moulded upside down stock. When I built mine, I used the AMS set on one pair and got them right side up but left the other pair stock and they were upside down but I didn't notice until much later. 

 

DSC_0255-L.jpg

 

One day I'll get around to finishing them. 

 

Carl

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...