Out2gtcha Posted January 3, 2019 Author Share Posted January 3, 2019 20 minutes ago, LSP_Kevin said: Nice work, Brian! Technically the cockpit should be in RLM 66, rather than 02, but since this is a What If, I doubt you really care! Yeah, by late 1944 all Do-335 A-2 Trops were coming from the factories w/RLM 02 cockpits..... On 1/2/2019 at 3:13 PM, Out2gtcha said: By the time Marseille got his Do-335 A-2, most all of the Trop versions coming out of the factories in Germany had RLM02 for all the gear bays as well as the cockpit too. The German command found that not only did RLM 02 survive the tortuous climate in Africa better, but also was easier for the pilots to deal with in the cockpit, as the heat built up by some of the RLM 66 cockpits got potentially dangerous. LSP_Kevin 1 Link to comment Share on other sites More sharing options...
Alain Gadbois Posted January 3, 2019 Share Posted January 3, 2019 Great story and great progress on the kit! Looks like a lot of fun! I really enjoy what ifs. A little known fact is that Marseille also flew for a short time the He 162. He liked the light weight fighter a lot but the jet engine gave endless problems, and the unavoidable ingestion of sand did not help. Note the aircraft also had the umbrella mounts. Model and photos: Marcel Bastien Alain dennismcc, MikeC, nmayhew and 7 others 10 Link to comment Share on other sites More sharing options...
Out2gtcha Posted January 3, 2019 Author Share Posted January 3, 2019 Very nice Alain! I like it a lot Alain Gadbois 1 Link to comment Share on other sites More sharing options...
williamj Posted January 3, 2019 Share Posted January 3, 2019 (edited) It's a great kit,and in the right hands. But feels a bit sacrilegious. "What if" I watch just a little while? loved the preamble though. Edited January 3, 2019 by williamj Shawn M and Out2gtcha 2 Link to comment Share on other sites More sharing options...
Out2gtcha Posted January 6, 2019 Author Share Posted January 6, 2019 Thanks all! More progress.......I got the PE completed along with the entire cockpit. This is where I got to. I ended up getting the front engine and Mg-151 bases on that will hold the Master barrels. These set on a shelf that support those, and to which mounts the IP as well. I got all this and the cockpit attached to the fuselage frame. The front engine has a substantial weight in it, as well as the weight peaking out from behind the firewall: I also sprayed a shot of cockpit color on the sidewalls as well as a bit of sand wash I'm headed back down to get the rear engine intake and radiator completed, which is pretty much the last thing needing done before closing up the fuse. Cheers! mozart, LSP_Kevin, Shawn M and 7 others 10 Link to comment Share on other sites More sharing options...
BloorwestSiR Posted January 6, 2019 Share Posted January 6, 2019 Very nicely done Brian. Great progress too. Carl Out2gtcha 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted January 6, 2019 Author Share Posted January 6, 2019 Thanks Carl! The kit fits really nice, and it's a real pleasure to build VS what I had been working on. It looks a bit average atm, as I will have all panels closed, so things dont look very detailed paint wise. I probably wouldn't have even painted the engines if I didnt think there may be something seen of them after the panels were closed. Well, I managed to get the fuselage closed up! Pics tomorrow. Cheers! Alain Gadbois 1 Link to comment Share on other sites More sharing options...
Daniel460 Posted January 6, 2019 Share Posted January 6, 2019 Very nice work Brian, your moving right along on this one! Dan Out2gtcha 1 Link to comment Share on other sites More sharing options...
Scale32 Posted January 6, 2019 Share Posted January 6, 2019 That coloured PE sure makes a difference contrasting well with the RLM02. Would never had thought to do that! Coming along very nicely. Cheers Bevan Out2gtcha 1 Link to comment Share on other sites More sharing options...
mozart Posted January 6, 2019 Share Posted January 6, 2019 Lovely work Brian, really interesting to see this taking shape. I guess being a "what if" gives you licence to paint as you wish because I would have thought the real Do335s were RLM66 interiors......I say this knowing nada about the type!! Out2gtcha 1 Link to comment Share on other sites More sharing options...
dennismcc Posted January 6, 2019 Share Posted January 6, 2019 Nice progress Cheers Dennis Link to comment Share on other sites More sharing options...
Troy Molitor Posted January 6, 2019 Share Posted January 6, 2019 Oh wow. How did I miss this! My new passion in life is replicating real 1:1 WWII instrument panels and when I saw the He-162 I almost choked on my oversized glass of red wine. Too cool 4 school. I’m 95% finished with my first panel of the He-162. (One pressure gage to go). Lovely efforts going on here with your Do-335! Troy Out2gtcha 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted January 7, 2019 Author Share Posted January 7, 2019 Thanks gents! Its really lovely coming along with a kit that fits really well, and this one surely does so far. On 1/6/2019 at 2:11 AM, mozart said: Lovely work Brian, really interesting to see this taking shape. I guess being a "what if" gives you licence to paint as you wish because I would have thought the real Do335s were RLM66 interiors......I say this knowing nada about the type!! Indeed Max! But all part of the story..................... On 1/2/2019 at 3:13 PM, Out2gtcha said: By the time Marseille got his Do-335 A-2, most all of the Trop versions coming out of the factories in Germany had RLM02 for all the gear bays as well as the cockpit too. The German command found that not only did RLM 02 survive the tortuous climate in Africa better, but also was easier for the pilots to deal with in the cockpit, as the heat built up by some of the RLM 66 cockpits got potentially dangerous. Link to comment Share on other sites More sharing options...
Out2gtcha Posted January 7, 2019 Author Share Posted January 7, 2019 The main fuselage halves are is now together, so will take some pics tonight. My back is feeling much better so its getting easier and easier to spend time at the bench. I'm hoping to get the main fuselage stuff together this week, and maybe by the weekend even a start on the wings and wells. Alain Gadbois, MikeMaben and Shawn M 3 Link to comment Share on other sites More sharing options...
Shawn M Posted January 7, 2019 Share Posted January 7, 2019 so glad to hear your back is on the mend, dont over do it Out2gtcha 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now