BiggTim Posted November 28, 2018 Share Posted November 28, 2018 (edited) September 1, 2022 update: It took 9 months to get the new printer delivered and set up at the office, but it's finally ready to go, so if anyone is in need of some deck prints, please let me know. 1/32 = 15 USD 1/24 = 20 USD 1/18 = 25 USD These three have to be shipped in a tube, so most of the continental US should run about 8 bucks for shipping and packaging. I usually knock off a few bucks if you buy more than one. The smaller scales will fit in a large envelope, so I'll ship them flat, and it should be cheaper. I haven't done that yet, so we can haggle if you want some. Pre-war original: and the print: (suitable for kits like the Hase BF2C-1, F4B-4, and the like) WW2 era original: and the print: Each was printed with a high quality wide format printer that we use for graphics at work, on double matte paper made for exactly this sort of thing. The paper is quite thick and durable, and each has been sprayed with a clear matte fixative that will protect the ink from smudging during shipping and application, and to some degree from fading and moisture (but NOT completely!). The fixative is professional quality and will not harm the image. I cut them out of the larger sheet leaving a white border of 1/2" to 1", so you can trim it down after you have mounted it, or it leaves you a bit to hide in a frame if you so choose. The image size itself is 13.25" square. Each will come rolled in a 3" cardboard tube with mounting instructions included. USPS estimator says it should cost about 5 bucks (could be more now, as of 9.1.22) to ship from my west coast zip (98942) to either NY or Miami, so anywhere in the continental US should be roughly the same. I could easily get 2 or 3 or more sheets in a single tube without changing the shipping costs dramatically, if at all. Anywhere outside that I'd just have to find out and let you know before you pay. Payment will be via Paypal, but I'd entertain other options as needed. Check out Out2gtcha's review of the WW2 image before you buy if you'd like a second opinion. At any rate, I'd be happy to give you a 30 day money back guarantee in case you're not happy for any reason. A few caveats: This is not a business. I am just a modeler like you folks, and I'm only doing this to make a little extra cash to finance my own hobbies (and keep my wife off my back for spending money ). It may take me up to a week to get them packaged and posted, so please be patient with me! If the first printing sells out, I will print more and post them here as soon as I can. Please let me know if you have any questions, and drop me a PM if you're interested in buying one!! Thanks! PS - Almost forgot: I can also print them in other scales. Edited September 2, 2022 by BiggTim Out2gtcha, Daniel Leduc, Nanook and 8 others 11 Link to comment Share on other sites More sharing options...
1to1scale Posted November 28, 2018 Share Posted November 28, 2018 I’ll take 2 of the late bases. PM sent. BiggTim 1 Link to comment Share on other sites More sharing options...
Nanook Posted November 28, 2018 Share Posted November 28, 2018 Wow, those look terrific! I'm thinking I will be getting a pre-war one for my Monogram Grumman F3F kit. Later, Lee BiggTim 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted November 28, 2018 Share Posted November 28, 2018 YES! With the holiday and some current health issues I have not gotten this done yet, but the pics are done, and I just have to write up the review. You can be assured folks Tim did a GREAT job on these! They are printed on SUPER heavy duty paper, and are about as high quality and professionally done as one could expect. Now that TG is done, and Im able to walk a bit after some much needed PT, I should have the actual review part done for Tims bases this week for sure Nanook and BiggTim 2 Link to comment Share on other sites More sharing options...
cbk57 Posted November 28, 2018 Share Posted November 28, 2018 I want a WWII Carier deck in 1/32 for sure. Please PM me at your convenience. I am not seeing where I could message you directly, overlooking something. I am in State College Pa for calculation of shipping. Nanook and BiggTim 2 Link to comment Share on other sites More sharing options...
coogrfan Posted November 28, 2018 Share Posted November 28, 2018 (edited) I'm in for one WWII deck, please. Shipping would be to Houston TX 77007. Edited November 28, 2018 by coogrfan BiggTim 1 Link to comment Share on other sites More sharing options...
firefly7 Posted November 29, 2018 Share Posted November 29, 2018 I will buy one 1/24 late deck print. Shipping will be to N.J 08817. Fantastic work, thanks. BiggTim 1 Link to comment Share on other sites More sharing options...
themongoose Posted November 30, 2018 Share Posted November 30, 2018 1 WWII deck for me. Pm inbound with information. These look stupendous can not wait to check it out. BiggTim 1 Link to comment Share on other sites More sharing options...
BiggTim Posted December 1, 2018 Author Share Posted December 1, 2018 A link to Brian's Review... Thanks again to Brian! Kagemusha and Out2gtcha 1 1 Link to comment Share on other sites More sharing options...
BiggTim Posted December 4, 2018 Author Share Posted December 4, 2018 Bump....still have a dozen or so 1/32 and couple of 1/24 prints left of the WW2 deck, and 3 pre-war decks in 1/32. I'm going to post them on a couple of facebook groups, too, so this printing may be gone soon. Tim Out2gtcha 1 Link to comment Share on other sites More sharing options...
Trak-Tor Posted December 6, 2018 Share Posted December 6, 2018 Looking really great. I'd be interested in 1/32, one pre-war, one war type... I wonder how much would shipping over to Europe cost.... Any idea? Juraj BiggTim and Out2gtcha 2 Link to comment Share on other sites More sharing options...
Kagemusha Posted December 6, 2018 Share Posted December 6, 2018 I'd be interested to know the cost to the UK, superb product Tim. Out2gtcha and BiggTim 2 Link to comment Share on other sites More sharing options...
BiggTim Posted December 6, 2018 Author Share Posted December 6, 2018 6 hours ago, Trak-Tor said: Looking really great. I'd be interested in 1/32, one pre-war, one war type... I wonder how much would shipping over to Europe cost.... Any idea? Juraj 5 hours ago, Kagemusha said: I'd be interested to know the cost to the UK, superb product Tim. If both of you want to PM me your mailing addresses, I'd be happy to find out and get back to you. Kagemusha, Out2gtcha and LSP_Kevin 3 Link to comment Share on other sites More sharing options...
BiggTim Posted December 7, 2018 Author Share Posted December 7, 2018 Hey folks, A couple of members in the UK and Europe are interested in ordering some prints, and would like to see if anyone else would like to go in with them to save on shipping. I can fit 6-8 prints in a single tube and ship for about 23.50 USD (according to the USPS estimator), so I could ship to one of you and you all can ship to each other for considerably less. If anyone is interested contact Kagemusha or Trak-Tor. Tim Trak-Tor, Kagemusha and Out2gtcha 3 Link to comment Share on other sites More sharing options...
coogrfan Posted December 12, 2018 Share Posted December 12, 2018 I received my 1/32 WWII carrier deck yesterday. In a word - beautiful. Any chance you might do a 1/18 version someday? Out2gtcha 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now