Madelf75 Posted January 1, 2019 Share Posted January 1, 2019 I just wonder if anyone has came up with a fix for the wings ,I dont feel that is a big deal but i am sure it is something that can be done . Out2gtcha 1 Link to comment Share on other sites More sharing options...
Iain Posted January 1, 2019 Share Posted January 1, 2019 Yes (I think) - next question? Iain LSP_K2 and LSP_Ray 2 Link to comment Share on other sites More sharing options...
Out2gtcha Posted January 1, 2019 Share Posted January 1, 2019 1 minute ago, Madelf75 said: I just wonder if anyone has came up with a fix for the wings ,I dont feel that is a big deal but i am sure it is something that can be done . Hey Steve, yes indeed there is! See Andy's link below for Iain's WIP thread were is is indeed attempting a fix for the wings. 6 hours ago, Kagemusha said: Ahem Just now, Iain (32SIG) said: Yes - next question? Iain Link to comment Share on other sites More sharing options...
Sanderman Posted January 2, 2019 Share Posted January 2, 2019 OK, so can we talk about the other big error now? Does that look even slightly like this to you? Notice how the cowl profile is wrong - too rounded on the sides vs the almost flat sided profile of the real thing? Never mind how the side air inlets are the wrong shape and lack interior finishing? I know, I just can't lave bad enough alone Joe Link to comment Share on other sites More sharing options...
Eagle Driver Posted January 2, 2019 Share Posted January 2, 2019 OK, I started to read the thread from Page 1, paragraph 1. Spent like 10 minutes and got a headache. It is obviously very complex project, due to discrepancies, embedded errors, complexity of the subject etc. I have simple question, if anybody or even many-bodies can reply, I would be more than grateful: Can HB B-24J kit be turned into e decent J variant and is it suitable for modifications to be built into H and L variants? Thank you in advance and Happy New Year! Link to comment Share on other sites More sharing options...
Iain Posted January 2, 2019 Share Posted January 2, 2019 9 hours ago, Sanderman said: OK, so can we talk about the other big error now? Notice how the cowl profile is wrong - too rounded on the sides vs the almost flat sided profile of the real thing? Never mind how the side air inlets are the wrong shape and lack interior finishing? I know, I just can't lave bad enough alone Joe Yes - aware of cowl fronts - and have a fix planned. Do you have the kit Joe? There are inserts for those intakes that improve the look - but far from perfect. Iain LSP_Matt 1 Link to comment Share on other sites More sharing options...
LSP_Matt Posted January 2, 2019 Share Posted January 2, 2019 18 minutes ago, Iain (32SIG) said: Yes - aware of cowl fronts - and have a fix planned. Iain A flat bit on the top and bottom between the sides? It looks like they've maintained the radius on the plastic part but the plane has a decreasing one? Nightmares of decreasing radius corners riding sportbikes. I wonder how much it's actually off when viewed square to the end of the prop shaft. Matty Link to comment Share on other sites More sharing options...
Iain Posted January 2, 2019 Share Posted January 2, 2019 It's a complex shape Matty - my thoughts are to cut away the inner sides of those intakes and install a new, complete, ring inside the cowl to form a curved liner that will form the inner faces of the intakes. This will then need to be re-profiled as the front edges of these intakes curve in a little when viewed from the side. Slice of brass for the splitter... The liner will either be based on a suitable spare cowling 'rim' (if I have one of a suitable size), or I'll turn up a pattern on the lathe and vac one. This will then be put in rubber and copies made. But all fixable IMHO. Will cover off in my Liberator GR Mk.VI build - after wings and turrets. Privateer ones are different again, in addition to being rotated 90 deg... Iain LSP_Matt 1 Link to comment Share on other sites More sharing options...
Iain Posted January 2, 2019 Share Posted January 2, 2019 48 minutes ago, Eagle Driver said: OK, I started to read the thread from Page 1, paragraph 1. Spent like 10 minutes and got a headache. It is obviously very complex project, due to discrepancies, embedded errors, complexity of the subject etc. I have simple question, if anybody or even many-bodies can reply, I would be more than grateful: Can HB B-24J kit be turned into e decent J variant and is it suitable for modifications to be built into H and L variants? Thank you in advance and Happy New Year! Yes, I believe so - with work. How much depends on how much you want to do re. fixing some of the shapes, and which particular airframe you wish to build? Depending on airframe you may need new turrets/gun positions/nose glazings. Iain Link to comment Share on other sites More sharing options...
Eagle Driver Posted January 2, 2019 Share Posted January 2, 2019 6 minutes ago, Iain (32SIG) said: which particular airframe you wish to build? Iain Actually I am researching for potential masks sets for various stabilizer art works which will be ugly view if done with decals. I think H,J and L have the greatest potential. Some Skulls will look awesome. From what I know, H and L differ slightly from J. For the untrained eye they don't. And I am guessing a lot of folks out there will consider doing HB J-variant into some of these to take the path less known. However, I am no expert /nor big fan/ of Liberator planes and I could use some knowledge in that matter. We are starting work on some J masks next week. But maybe I can widen the perspective on the subject. Iain 1 Link to comment Share on other sites More sharing options...
LSP_Matt Posted January 2, 2019 Share Posted January 2, 2019 Found a local link on a restoration project. some good internal details for the cowl...especially outer shape vs inner HTH Matty Padraic Conway and phasephantomphixer 2 Link to comment Share on other sites More sharing options...
Iain Posted January 2, 2019 Share Posted January 2, 2019 Ace photos - some *really* useful stuff in there! Iain LSP_Matt 1 Link to comment Share on other sites More sharing options...
Nigels modelling bench Posted January 2, 2019 Share Posted January 2, 2019 Please correct me if I'm wrong, but I've seen no mention of the ball turret on this kit? Does one assume it's OK accuracy wise then?? Link to comment Share on other sites More sharing options...
Eagle Driver Posted January 2, 2019 Share Posted January 2, 2019 My assumption is that there will be tons of wrong details, starting from rivets and panel lines, up until major flaws. But it is Hobby Boss after all, not Tamiya or ZM. And it is /at least I got it for/ 1/3rd of the Lancaster's price. Anything better in 32nd scale on the subject? So either bite the bullet or... Link to comment Share on other sites More sharing options...
Iain Posted January 2, 2019 Share Posted January 2, 2019 Yup - my thoughts exactly! I also have a masochistic streak that means I quite enjoy trying to fix things... Has to be a subject I'm really interested in though, and Liberator ticks that box nicely! Not had a chance to look at ball turret in any detail Nige - but I will soon - still working on a kit review for LSP. If you have any thoughts? Iain Bill_S and LSP_Matt 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now