Simmo.b Posted October 3, 2018 Share Posted October 3, 2018 I am planning on combining the ID fusalage with scratchbuilders cockpit,turret and wings etc LSP_Kevin, Cees Broere, Daniel460 and 1 other 4 Link to comment Share on other sites More sharing options...
LSP_Ron Posted October 3, 2018 Share Posted October 3, 2018 I had the Scratchbuilders kit for several years but ended up selling it. I did a review of it several years ago. Ron Rick Griewski, Daniel460 and Jack 3 Link to comment Share on other sites More sharing options...
Suresh Nathan Posted October 3, 2018 Share Posted October 3, 2018 (edited) 7 hours ago, thierry laurent said: Well, if the landing gear and propeller were included , this would indeed lessen the effort! ;-) That's true. The undercarriage is also being designed. I scratchbuilt mine mainly because I needed to meet a dateline. Also, because its an early war design, the undercarriage is actually quite fun to build out of brass bits. The props are quite easy to cut out and shape. I have a friend at the club who does it all the time. I used resin just to use up some old stock. The main thing is the spinner which is provided. Here's Chris designing the thing at HPM. Lol. Early test shots: Suresh Edited October 3, 2018 by Suresh Nathan Daniel460, Out2gtcha and Alburymodeler 3 Link to comment Share on other sites More sharing options...
Daniel460 Posted October 4, 2018 Author Share Posted October 4, 2018 I have one fresh off the vacuum machine on the way! John at Tigger fixed me up. I found that it was easier to get a hold of him on facebook. Will be taking my Valient wings book to get the drawings enlarged in the next few days. Suresh if you find you have an extra prop and landing gear set let me know...... Anyone know of a good source for a Merlin XX engine in 1/32? Dan Suresh Nathan 1 Link to comment Share on other sites More sharing options...
Suresh Nathan Posted October 4, 2018 Share Posted October 4, 2018 3 minutes ago, Daniel460 said: I have one fresh off the vacuum machine on the way! John at Tigger fixed me up. I found that it was easier to get a hold of him on facebook. Will be taking my Valient wings book to get the drawings enlarged in the next few days. Suresh if you find you have an extra prop and landing gear set let me know...... Anyone know of a good source for a Merlin XX engine in 1/32? Dan Welcome to the dark side! Daniel460 1 Link to comment Share on other sites More sharing options...
Suresh Nathan Posted October 4, 2018 Share Posted October 4, 2018 Hey Dan, Do you have a detail picture of the top of the Defiant? Especially the engine cowling area. Link to comment Share on other sites More sharing options...
Alburymodeler Posted October 4, 2018 Share Posted October 4, 2018 I would like to think that Chris @HPM would be tempted to go the whole hog and produce an injection moulded 1/32 Defiant. Back in the day, I was working on a P-51B and D, and we were contemplating the Whirlwind (the solid masters of this went to China with me while working on the original Mirage). Then Tamiya came along with the P-51, and the rest is history..... Link to comment Share on other sites More sharing options...
Artful69 Posted October 4, 2018 Share Posted October 4, 2018 (edited) 9 hours ago, Daniel460 said: ... Anyone know of a good source for a Merlin XX engine in 1/32? Dan Apparently each WnW Lancaster kit will have 4 RR Merlins and 4 Packards .. I'm sure someone will either 1) use Packards ... leaving them 4 spare Merlins (for a RR Factory diorama????) or ... 2) Someone will have an early case of CBF set in after building up the first 1 or 2 of them and decide to close up the nacelles sans engine. Rog Edited October 4, 2018 by Artful69 Link to comment Share on other sites More sharing options...
Suresh Nathan Posted October 4, 2018 Share Posted October 4, 2018 4 hours ago, Alburymodeler said: I would like to think that Chris @HPM would be tempted to go the whole hog and produce an injection moulded 1/32 Defiant. Back in the day, I was working on a P-51B and D, and we were contemplating the Whirlwind (the solid masters of this went to China with me while working on the original Mirage). Then Tamiya came along with the P-51, and the rest is history..... Yes. This was discussed..... I've given Chris the link to this discussion so show him some Defiant love and who knows...... Alburymodeler 1 Link to comment Share on other sites More sharing options...
Daniel460 Posted October 4, 2018 Author Share Posted October 4, 2018 9 hours ago, Artful69 said: Apparently each WnW Lancaster kit will have 4 RR Merlins and 4 Packards .. I'm sure someone will either 1) use Packards ... leaving them 4 spare Merlins (for a RR Factory diorama????) or ... 2) Someone will have an early case of CBF set in after building up the first 1 or 2 of them and decide to close up the nacelles sans engine. Rog Great idea Rog! Let me know when you get yours...... Dan Link to comment Share on other sites More sharing options...
Cees Broere Posted October 5, 2018 Share Posted October 5, 2018 The Packard Merlin 28 engine is the US built variant of the RR Merlin XX. Apart from details and accessories they look visually similar. Providing 8 engines will be a matter of plastic overkill and more expensive too. The Mk III Lancaster was created to differentiate the US built engines. In service Lancs could be flying with a mix of both manufacturers engines. As Iain says we never had it so good. And yet we are not satisfied. Cees Iain, D.B. Andrus and Daniel460 3 Link to comment Share on other sites More sharing options...
Fred Jack Posted October 5, 2018 Share Posted October 5, 2018 (edited) On 9/29/2018 at 2:01 PM, DeanKB said: I'd buy a Defiant. But then again, the market for crap British WWII two seat fighters is a bit thin. Look at how many people want a crap German Fokker Dr.1 Triplane. Also you are forgetting that the Defiant was a very successful night fighter, just as the Bf.110 was. Edited October 5, 2018 by Fred Jack Link to comment Share on other sites More sharing options...
DeanKB Posted October 5, 2018 Share Posted October 5, 2018 30 minutes ago, Fred Jack said: Look at how many people want a crap German Fokker Dr.1 Triplane. Also you are forgetting that the Defiant was a very successful night fighter, just as the Bf.110 was. The Fokker Triplane is an iconic WWI aircraft, that shot down a lot of aircraft, produced 16 Aces and was only replaced by the Fokker D.VII. Hardly "crap"? The Defiant was, at best, an interim mediocre night-fighter, quickly replaced by the Beaufighter after a few months, destined for the dreaded conversion to target tugs & air-sea rescue. The Bf 110 served as a night-fighter pretty much until the war ended. Link to comment Share on other sites More sharing options...
Fred Jack Posted October 8, 2018 Share Posted October 8, 2018 (edited) On 10/5/2018 at 4:35 PM, DeanKB said: The Fokker Triplane is an iconic WWI aircraft, that shot down a lot of aircraft, produced 16 Aces and was only replaced by the Fokker D.VII. Hardly "crap"? The Defiant was, at best, an interim mediocre night-fighter, quickly replaced by the Beaufighter after a few months, destined for the dreaded conversion to target tugs & air-sea rescue. The Bf 110 served as a night-fighter pretty much until the war ended. You obviously haven’t read much about how slow because of drag and the poor visibility the DR1 had, and the reason the Germans kept using it, unlike the British who dropped theirs, was because until the D.Vlls came out, the Germans had nothing to replace the Dr.1. If the Dr.1 was so great, why was there not another Fokker Scourge as there was with the Fokker E.ll and lll, nor another Bloody April as there was with the Albatros D.lll. As a matter of fact, Fokker had problems at first selling the D.Vll because of the DR1’s reputation. As far as the Beaufighter replacing the Defiant and the Hurricane as a night fighters. it had to do with radar on the Beaufighter and not the Defiant or Hurricane’s performances. But if I bought my models based on the actual plane’s performance, one of my favorite models wouldn’t be an RE.8. As far as the Defiant, Scratchbuilders released a stunning Defiant in 1/32 until about 15 years ago in resin. It received great reviews. I even have one. Edited October 8, 2018 by Fred Jack Link to comment Share on other sites More sharing options...
wunwinglow Posted October 12, 2018 Share Posted October 12, 2018 On 9/29/2018 at 11:57 AM, Tony T said: Is their 1/48 Defiant any good, as that would likely form the basis of a potential 1/32 one? The Airfix one is far superior, but as we know, Airfix would never touch 32nd scale.... Shame. . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now