mark31 Posted August 9, 2018 Share Posted August 9, 2018 30 minutes ago, Daniel Leduc said: Yeah, thanks for the lesson, we don't know much on Russian subject and should do more ... Already planning some soon.. going for a Flanker next? Mark Link to comment Share on other sites More sharing options...
Daniel Leduc Posted August 9, 2018 Author Share Posted August 9, 2018 Hey everyone, Here's my startup and my frist "Bou Bou"...... First, I'd like to thank's FlorinM, blackbetty and Madmax to ease my built..... I'm going true your WIP constantly to help me make my next move, avoiding problems..... not that I make a lot . but your comments and suggestion are always welcome, just keep in mind that my mojo is always"Quick and Easy". And the first mod I did with my Buddy André(Dora) based on FlorinM's built, was to make a copy of the Trumpy Mig-29 nose cone... To found out a few days later that Quickboost was offering a correct one for the Trumpy kit... ........ Oh boy. Anyway, then move on the pit, painting was straight forward, detailling and wash, will do some dry brushing later... tried a little dry fit..... And BANG! went too heavy on the shaving the fuselage ..... my first gap to fill. Will try not to duplicate hey...? next will finish the IP, final touch on the pit and will do the nose wheel bay. Hope you like it and have fun. Dan. mark31, BloorwestSiR, MikeMaben and 6 others 9 Link to comment Share on other sites More sharing options...
Gazzas Posted August 9, 2018 Share Posted August 9, 2018 The pit looks good! Link to comment Share on other sites More sharing options...
Dukie99 Posted August 9, 2018 Share Posted August 9, 2018 The pit looks awesome. Thanks for the Quickboost nosecone tip, I just got myself one. Cheers, David Link to comment Share on other sites More sharing options...
Daniel Leduc Posted August 9, 2018 Author Share Posted August 9, 2018 2 hours ago, mark31 said: going for a Flanker next? Mark Dang it's hard to keep secret these day's.... was going for another Russian plane for sure and didn't made up my mind yet between a Sukhoi and a Mig-29A An Agolian Sukhoi..... Or maybe that one..... in basic colors But would had prefer that beast, Su-30 603, too bad I only have the UB kit.... don't know if the only noticable difference between both are the center sight and the IP...? And for the Mig-29, this nice Slovakian Tiger meet.... Yeah, there's always tuff choice in a modellers life.... Dan. Gazzas, Ivan Ivanovich, Alain Gadbois and 4 others 7 Link to comment Share on other sites More sharing options...
dora9 Posted August 9, 2018 Share Posted August 9, 2018 Tiger, tiger, tiger....... Link to comment Share on other sites More sharing options...
Ivan Ivanovich Posted August 9, 2018 Share Posted August 9, 2018 (edited) Good progress, Dan. Keep it up! The Angolan Su-27 looks excitingly shabby. Edited August 10, 2018 by Ivan Ivanovich Gazzas 1 Link to comment Share on other sites More sharing options...
Daniel Leduc Posted August 15, 2018 Author Share Posted August 15, 2018 Since I don't like being down bottom here's a quick update.... first, did repaired my heavy shaving, there's nothing a little styrene can't fix..... will seal all gap with putty later. The Trumpy Mig-29 nose fit like a charm ..... '' The Florin 13 way ''.. Most propbably going to put some weight in that nose, just in case.... And move on the Aires main wheel bay, very easy to fit. But can't say the same for the nose bay...... oh boy again, more styrene..... Some work on the intake, '' The Zacto way '' , was done in 30 min. and it looks way better. With some Tamiya putty, it'll be just perfect. Sometime I can put together or dismental 6 to 10 times before gluing parts, but on this piece of the fuselage, dang I'm amaze by the fit of that tongue and groove. Always a perfect fit. Hope you like it and see you soon for more, thanks for watching. Dan. BradG, Gazzas, LSP_Kevin and 6 others 9 Link to comment Share on other sites More sharing options...
blackbetty Posted August 15, 2018 Share Posted August 15, 2018 very nice work! reminds me of mine that still isnt fiished.... Daniel Leduc 1 Link to comment Share on other sites More sharing options...
Gazzas Posted August 15, 2018 Share Posted August 15, 2018 Nice rounding of those intakes. Looks good! Gaz Link to comment Share on other sites More sharing options...
Alain Gadbois Posted August 15, 2018 Share Posted August 15, 2018 Great work Daniel! Nice to see the attention you take to correct the kits shortcomings. Too bad about the nose wheel bay resin part. Alain Link to comment Share on other sites More sharing options...
kikka Posted August 15, 2018 Share Posted August 15, 2018 god damn i love 23s ! the resin is really a must buy for this kit . it really makes it awesome and rewards time spent painting it . and you dont need much weight in the nose since the intakes , pit etc are quite heavy . Link to comment Share on other sites More sharing options...
BloorwestSiR Posted August 15, 2018 Share Posted August 15, 2018 Looks great Dan. I'm tempted to get one for a Czech Tiger Meet scheme but I'm not sure I have the space with everything else in the stash. Carl Link to comment Share on other sites More sharing options...
Out2gtcha Posted August 15, 2018 Share Posted August 15, 2018 Looks terrific! Of course if I had to choose of course I'd go primer on the Flanker......... Daniel Leduc 1 Link to comment Share on other sites More sharing options...
Daniel Leduc Posted August 17, 2018 Author Share Posted August 17, 2018 On 8/15/2018 at 3:51 AM, blackbetty said: very nice work! reminds me of mine that still isnt fiished.... Your Cuban I'm following yeah..... very good work my friend. Dan. blackbetty 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now