Jump to content

Recommended Posts

Hit a milestone today, the cockpit is done and ready for a final check. :piliot:Let me know if you see something I should correct before I seal it up and get ready to primer the whole plane. I'm very happy I didn't launch one piece into the stratosphere! I masked the canopy while I was waiting on paint to dry. Wish I hadn't been so productive now that I had a chance to borrow my son's camera with the wide angle lens or I could have gotten some shots with it on too. The pilot is Vallejo's Green Grey which seems to be the match to sage green. I lightened the color with white and yellow for a few different tones. I darkened it with black and didn't like it at all, seemed to come out a deep grey instead of a green tone. I'm debating if a black wash would make it look any better. Let me know your thoughts. 

2018120422293548-image000002-XL.jpg

2018120422302143-image000005-XL.jpg

2018120422304608-image000003-XL.jpg

2018120422310838-image000008-XL.jpg

Share this post


Link to post
Share on other sites

Started my first black basing trials tonight! The MCW paint is thinned 50/50 with gunze leveling thinner. One of the guys at our local club suggested this to get a smoother finish and to be able to control how much paint is going down. One of my best lessons yet has come from this experience. Probably the first time I’ve been able to get a fine line and this method is helping me learn how to put the paint down n layers rather than an overall spray that tends to be too thick. Below is just the mottle coat. Will do more over the weekend following some more practice before i spray a cover coat and some other shades. 1st I’ve got to get the whole thing together tho lol

IMG_3731-L.jpg

IMG_3753-L.jpg

IMG_3730-L.jpg

Share this post


Link to post
Share on other sites

Looks good Chris! I've been wanting to give black basing a try myself, so I'll be watching how you do it. I have a build for the Multi-Engine GB I'll be attempting it on.

 

Mike

Share this post


Link to post
Share on other sites

Thanks Dragon. Stay tuned this weekend, should be mottling by tonight for sure.

 

So I took a day off work for this. Originally this was supposed to be for a Marine tribute at our local IPMS club meeting in September. Since the water dripping into the family room from the upstairs bathroom took over my late summer lol, it has become a December meeting goal...So I took a day off work for this because it still felt too far from done to make the meeting on the 17th. 

Here is the overall state of things today (did some weapons too but no pics of those till they're done).

IMG_3758-L.jpg

Does anyone have experience with how the filler looks once you start putting color on the aircraft? The black primer shows it way too well. When I use grey primer it seems to blend in pretty good. Will end up testing things out on the stabilator before I do the main plane so any advice ahead of time would be great.

IMG_3755-L.jpg

IMG_3756-L.jpg

IMG_3757-L.jpg

Share this post


Link to post
Share on other sites

One thing I can conclude, I must do a better job blending in the filler. Jury's out on how I'm doing at black basing. Let me know what you think good or bad? Some of my mixed opinion is that the paint is really glossy after applying the top coat with 70% thinner and it shows everything. The thinned coat is hard to lay down because it's hard to see the paint. Took awhile to find the right reflection and set up the airbrush different than for the mottle coat.

1st off I'll show two stabilators side by side. On the left are 3 coats, primary color and a lightened mix and darkened mix. I used white and black to change the shades. 

Stabilators-XL.jpg

 

Here's some progress pics. This 1st one is the set with just the base color on them.

IMG_3759-XL.jpg

Here they are with all 3 coats prior to doing the thinned cover coat with the base color.

IMG_3764-XL.jpg

And whenever I had some paint still in the cup I threw it on the hornet :-)

IMG_3763-XL.jpg

Share this post


Link to post
Share on other sites

It’s a model fest weekend!!

heres the gark ghost grey and lighter dark ghost grey mottle coat. After the kids christmas carol concert tonight the darker dark ghost grey will go on mist likely [:P]

IMG_3772-X2.jpg

I also redid the stabilators. Used bondo glazing putty instead of perfect plastic putty.it looks much better. Pics later once i get them repainted.

 

Share this post


Link to post
Share on other sites

I am following your painting progress with great interest.  I love this technique and am about to use it on my RNZAF Skyhawk centerline fuel tank soon.  Personally I think you are doing a great job so far!  Looks just like Doogs video's.

 

Keep up the great work my friend!

 

Cheers Anthony

Share this post


Link to post
Share on other sites

Who hoo thanks for the encouragement Anthony! 

 

This morning the bottom mottling is all done. Starting with th small parts was definitely the wayto go. If for no other reason this method is great for impoving air brush skills. Recognizng when it needs cleaned out and when my strokes are getting sloppy, like going too fast. So heres where I’m at plus a shot of all the different mixes and a bonus, had a few pieces of cork board left from my daughters room decorating request that were put to good use.

IMG_3777-L.jpg

IMG_3779-L.jpg

IMG_3776-L.jpg

Share this post


Link to post
Share on other sites

It's been a completely uninterrupted day in the paint booth :thumbsup: Another 2 hours gone and the bottom is done in light ghost grey. The tails were supposed to be LGG too which I almost missed. Glad Dave Roof has the graphics with his decals for sure as I kept that sheet right next to me all day.

IMG_3784-XL.jpg

 

Here's something I really like about this system...I think I said that a few posts up too haha. These 3 pics are for a repair I did. Once I had the mottle coat finished I noticed some poor filler work, yeah I know go figure lol. In order of progression you can see how the repair goes and prior to the top coat it's almost unnoticeable.

IMG_3780-XL.jpg

IMG_3782-XL.jpg

IMG_3783-XL.jpg

 

I still need more work on my sanding and filling but it's getting better.

Share this post


Link to post
Share on other sites

Calling it a day. Time for a beer and some nfl football. I see Hornets over Hanoi is updated so maybe I’ll read a few build threads first...

Here she is with a gloss coat on her, ready for weathering. The last one is a collage of all the small parts i did as well.

the mottling really shows up under the gloss clear. Assuming it will fade when the matt clear goes on. Anyone with experience with this that could confirm how it looks with matt clear?

IMG_3786-XL.jpg

IMG_3785-XL.jpg

IMG_3787-XL.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×