Greg W Posted July 19, 2018 Author Share Posted July 19, 2018 (edited) What do you think of this idea... - use a Dremel tool with buffing wheels and aluminum polish on the glossy side of household aluminum foil wrap - cut, trim with hobby knife or punch out mirror shape from the polished foil - use Future Floor Polish to glue the foil to photoetch mirror or scratch built mirror - coat top of foil with Future for glass effect and seal foil Edited July 19, 2018 by GDW Gigant 1 Link to comment Share on other sites More sharing options...
Greg W Posted July 22, 2018 Author Share Posted July 22, 2018 (edited) Here is the set up for the, aluminum foil mirror test. The plastic pop bottle is serving as a shield to keep the polishing compound from flinging all over the room. Edited July 22, 2018 by GDW Gigant and Anthony in NZ 2 Link to comment Share on other sites More sharing options...
Greg W Posted July 22, 2018 Author Share Posted July 22, 2018 (edited) Here are the results of my foray into metal polishing. This can definitely work. I need to seek out a knowledgeable expert on metal finishing in order to do this right (achieve a true mirror effect) but this experiment proves that this isn't a dumb idea. Check it out... Below is the reflected image of my cellphone in the polished foil. This is worth pursuing. Greg Edited July 22, 2018 by GDW Gigant, Anthony in NZ and Marcel111 3 Link to comment Share on other sites More sharing options...
Greg W Posted July 22, 2018 Author Share Posted July 22, 2018 Just now, GDW said: 21 minutes ago, MARU5137 said: EXCELLENT method of polishing Foil... And SUPERB workmanship .... look forward to seeing more of your exciting build. ROCK ON !! Thanks MARU. Try it out and let me know how it goes. The size of the patch I polished was a little smaller than a 3" x 5" card. I would recommend working a smaller area. Greg Link to comment Share on other sites More sharing options...
Vandy 1 VX 4 Posted July 23, 2018 Share Posted July 23, 2018 You can also try this!!! It has adhesive on the back already https://www.ebay.com/i/231455061058?chn=ps Anthony in NZ 1 Link to comment Share on other sites More sharing options...
Greg W Posted July 23, 2018 Author Share Posted July 23, 2018 1 hour ago, Vandy 1 VX 4 said: You can also try this!!! It has adhesive on the back already https://www.ebay.com/i/231455061058?chn=ps Excellent idea! I have some on hand too. Once I learn from someone who knows how to do this properly, I will test the process on both the heavy duty aluminum foil and the chrome bare metal foil. Speaking of aircraft mirrors, the photos below were taken at the R.A.F. museum in Hendon, London. I'm looking in same mirror that Sir Douglas Bader used! Anthony in NZ and Vandy 1 VX 4 2 Link to comment Share on other sites More sharing options...
phasephantomphixer Posted July 30, 2018 Share Posted July 30, 2018 All great mirror suggestions, and quite a technique with polishing! That pushes my lazy modeler factor I admit. Since Acft. mirrors aren't huge even in our scale, I use the little chrome metal strips inside those rectangular white plastic anti-theft casings attached inside packaging of pricey items. Cut one end open to remove the strips. Then use sharp scissors and cut to size. Greg W 1 Link to comment Share on other sites More sharing options...
Gerhard Posted July 30, 2018 Share Posted July 30, 2018 I use chocolate wrappers. Eat the chocolate 1st though. Link to comment Share on other sites More sharing options...
Gerhard Posted July 30, 2018 Share Posted July 30, 2018 On 7/23/2018 at 4:38 AM, GDW said: Excellent idea! I have some on hand too. Once I learn from someone who knows how to do this properly, I will test the process on both the heavy duty aluminum foil and the chrome bare metal foil. Speaking of aircraft mirrors, the photos below were taken at the R.A.F. museum in Hendon, London. I'm looking in same mirror that Sir Douglas Bader used! Thats not how you take a selfie. phasephantomphixer 1 Link to comment Share on other sites More sharing options...
Guest Maxim Posted July 30, 2018 Share Posted July 30, 2018 On 7/12/2018 at 5:31 PM, hamfists nz said: By the way..what product is your ejection seat? It looks much nicer that the kits The best seat is the Wolf pack seat. Really nice and the parachute pack doesn't look like a sofa cushion like the Avionix seat. Link to comment Share on other sites More sharing options...
Greg W Posted August 29, 2018 Author Share Posted August 29, 2018 On 7/12/2018 at 3:07 AM, hamfists nz said: This is good. I was wondering how to do this. My A-4 is in a 4 year hiatus waiting for Anthony in NZ’s exciting cockpit project. I think I need to also make the bulkhead. If the Brazilian version is the same as the NZ version..there is a loose (looks like canvas) strap that flaps around on one side that is for the pilot to pull the canopy down with. Check out this build thread. The canopy detailing is appropriate for your project. https://www.britmodeller.com/forums/index.php?/topic/235027738-ran-a4g-skyhawk/ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now