Gazzas Posted July 9, 2017 Author Share Posted July 9, 2017 Mark, Thank you very much! Link to comment Share on other sites More sharing options...
Gazzas Posted July 9, 2017 Author Share Posted July 9, 2017 Hi Joel, Thank you. I'm glad you like it. This time of year it's hard to take good photos with my crappy phone camera. The sun is always at low angles right now so perfect photo opportunities are a bit scarce without better equipment. And if I go inside and use the flash, the acrylic paint gives off a reflection. I know a lot of guys use a 'light-box', but I've trying to avoid buying and building yet another piece of specialist gear. Gaz Link to comment Share on other sites More sharing options...
Guest Peterpools Posted July 9, 2017 Share Posted July 9, 2017 HI Gary the color modulation looks very convincing and not over done. The rust on the muffler leaves me with a few questions as to the pattern of the light rusty color and the muffler body being more of a darker rust as compared to the end rust which is a lot lighter. Not being an armor guy, I might be all wet your your muffler dead on the money but somehow the balance of color of the muffler doesn't sit right. One other question: any reason you choice to use pastels rather then oils or a filter? Still looking mighty good Keep 'em coming Peter Link to comment Share on other sites More sharing options...
Joel_W Posted July 9, 2017 Share Posted July 9, 2017 (edited) Gary, A cheap fix for a regular camera is to put a frosted plastic cup over the flash, and instant difuser, but you can't do that with a phone as the built in flash is usually right next to the camera lens. Try a piece of frosted Scotch tape over the flash but don't cover the camera lens. Hopefully that will work. You might need to bump of the exposure a 1/3 or 1/2 a stop if your camera has any settings. One picture will tell you if it's needed. Joel Edited July 9, 2017 by Joel_W Gazzas 1 Link to comment Share on other sites More sharing options...
Gazzas Posted July 9, 2017 Author Share Posted July 9, 2017 Hi Peter, Thank you for praise and assessment on the muffler. As I'm still learning and experimenting, one of the things I'm learning to appreciate is the randomness that using pastels give. I will look at the muffler again and see if I might even it out a bit. Regarding oils and filters, those are still to come. I'm beginning to view armor weathering as a process of layers where each layer cancels out parts of the proceeding layers and makes the entire appearance richer. Hoepfully, anyway. This step was paint modulation. Here's what I have planned from what I have learned recently: Paint modulation: Completed. A black oil wash to highlight recessed detail. Streaking with oils A dust filter Highlighting raised detail by dry-brushing Touch-up and Finally a matte coat. Hopefully everything I've planned is in the right order. mustang1989 and Joel_W 2 Link to comment Share on other sites More sharing options...
Gazzas Posted July 9, 2017 Author Share Posted July 9, 2017 Joel, Thank you for the tip. I'm definitely going to give that a go! Gary Joel_W 1 Link to comment Share on other sites More sharing options...
mustang1989 Posted July 10, 2017 Share Posted July 10, 2017 You're gonna have to go over those processes in some detail so I know what I'm doing when I get there myself. Watching...................... Gazzas 1 Link to comment Share on other sites More sharing options...
Gazzas Posted July 20, 2017 Author Share Posted July 20, 2017 Hi Everyone, Been a while since my last update but I have been busy on this thing. Mainly delays were caused by waiting for media to dry. Since my last update the model was sealed with Future and allowed to cure for a day. After that, a black wash was applied to darken corners and recesses. A couple days later I lightly streaked any sloped or vertical surfaces. Probably too lightly... And then I gave it a dust filter with a dirty light khaki color. Then allowed a few more days to dry... Today I used pastels and glass cleaner to make it look dusty. I've got a new phone, so new camera, too. I would have taken another batch of pictures, but since I have work tomorrow, I didn't have time to play with it. Thanks fer lookin'! Gaz Bill Cross and mustang1989 2 Link to comment Share on other sites More sharing options...
mustang1989 Posted July 20, 2017 Share Posted July 20, 2017 That's some very nice photos for a dang phone and that there good sir is some mighty fine modeling. Learning good tricks all the time here. Gazzas 1 Link to comment Share on other sites More sharing options...
Joel_W Posted July 20, 2017 Share Posted July 20, 2017 Gary, Your layering to build up a realistic weathered tank is really paying off. The transformation from your 1st set of photos of a unweathered tank to now is just amazing. Looking forward to what comes next. Joel Gazzas 1 Link to comment Share on other sites More sharing options...
Bill Cross Posted July 20, 2017 Share Posted July 20, 2017 Keep it goin'! Link to comment Share on other sites More sharing options...
Gazzas Posted July 20, 2017 Author Share Posted July 20, 2017 Mustang, Thank you very much. I was afraid there wasn't enough light, and I noticed the flash hasn't gone off. I had expected it to be automatic. Gaz Link to comment Share on other sites More sharing options...
Gazzas Posted July 20, 2017 Author Share Posted July 20, 2017 Joel, Thank you very much. I'm glad to see that my efforts are paying off. I'm pretty certain that the last two steps on the horizontal surfaces completely covered the preceding two layers. But I'm glad to be rounding the corner to slide into home. With so many parts and so much time given over to waiting for paint to dry, these armor builds can seem to be very long. Gaz Link to comment Share on other sites More sharing options...
Gazzas Posted July 20, 2017 Author Share Posted July 20, 2017 Bill, Thank you for the motivation! Gaz Link to comment Share on other sites More sharing options...
Gazzas Posted July 23, 2017 Author Share Posted July 23, 2017 Hi Everyone, Finally calling this puppy done. I really experimented a lot with filters and pastels to add dust, rust, and other weathering effects. I don't particularly believe that tankers let their tanks get rusty. But with these Schurzen, I saw an opportunity to rust something other than the muffler and exhaust. I believe that schurzen would be of soft, inferior steel which by nature of the design would cause the lower schurzen to have a lot of metal on metal movement thereby eroding paint and allowing for rust to form. I did try to depict a dusty vehicle during a combat phase and not during the longer, and more regular non-combat phase. So, the tools, chassis, and all horizontal and vertical got a heavy and light dust treatment respectively. The second to final method was dry brushing with white enamel. I saw a guy use a broad brush for this on U-tube, so I thought I would attempt the same. Unfortunately, in some areas there it came out too heavy handed. I'll go back to using a smaller brush. Finally a dull coat. This changed the look of a lot of areas. I really can't explain it. The dull coat I used was an Alclad lacquer product. I had noticed earlier in the build when sealing with Future that the look of the heavily pasteled areas did change where I had applied the pastels wet. So... I dunno. I would love to hear any input you guys have to share so that I can someday nail armor weathering. On to the pictures: Some Close-ups: I noticed there was some dappled light hitting the top of my BBQ, so I took a few shots there: You probably noticed that the aerial looks pretty battered. It's .02mm copper wire, and I'd used the drill method to make it perfectly straight before I glued it into place. Unfortunately, I bent it about 20 times during the weathering process and I didn't feel like ripping it out since it had withstood my best efforts to ruin it. Thanks you for looking! Gaz BiggTim, Bill Cross, Girlscanplay2 and 3 others 6 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now