nichenson Posted November 9, 2016 Share Posted November 9, 2016 Ok, figured I might as well get to building and posting something. I am still putting together my paint booth which the kit is sitting on the top drawer. The main piece should be finished by Friday evening and then I can order the spray booth. Anyway, I believe someone had asked about this prior to me posting this; however, this is about the only kit I have that is old enough. I do have a Beaufighter (as do several others, lol) but I am not in a RAF mood right now. Progress may be slow, but I will give it my all. BTW, both the kit and resin transkit were purchased from fellow board members. Comments are always welcome. r0t0rdr1ver, Azgaron, Lothar and 4 others 7 Link to comment Share on other sites More sharing options...
r0t0rdr1ver Posted November 9, 2016 Share Posted November 9, 2016 Another great addition to the GB! Link to comment Share on other sites More sharing options...
Dukie99 Posted November 9, 2016 Share Posted November 9, 2016 This is awesome. I had one Revell Mirage which I had bought in the hope of sourcing one of the Isracast conversion. I was unsuccessful in that and I ended up building it OOB in Swiss marking for my son. I recently noticed that the Isracast conversion are again available for purchase from Isracast website. I will follow with much interest. David r0t0rdr1ver 1 Link to comment Share on other sites More sharing options...
r0t0rdr1ver Posted November 9, 2016 Share Posted November 9, 2016 This is awesome. I had one Revell Mirage which I had bought in the hope of sourcing one of the Isracast conversion. I was unsuccessful in that and I ended up building it OOB in Swiss marking for my son. I recently noticed that the Isracast conversion are again available for purchase from Isracast website. I will follow with much interest. David Really? I can't find it, can you provide a link? Link to comment Share on other sites More sharing options...
nichenson Posted November 10, 2016 Author Share Posted November 10, 2016 http://www.isradecal.com/specials Link to comment Share on other sites More sharing options...
nichenson Posted November 10, 2016 Author Share Posted November 10, 2016 (edited) I am not sure if they will do a conversion for the Italeri kit, but I do know they are planning a new release on the Ra'am transkit. I have not seen all the releases for next year so maybe someone can advise if there is a plan from Italeri or Kinetic to do the Kfir. Edited November 10, 2016 by nichenson Link to comment Share on other sites More sharing options...
alain11 Posted November 10, 2016 Share Posted November 10, 2016 HI interesting project !!!! I will follow this build ...... I built the F 21 / kfir C1 version last year ,( I think the WIP is still available here) there were no real issues...... so good luck , and happy modeling ... I wonder is the isracast conversion would fit to the I talieri mirage ??? ...I have just tested the resin nose to the Italieri kit , not bad at the first looks Alain Link to comment Share on other sites More sharing options...
nichenson Posted November 10, 2016 Author Share Posted November 10, 2016 HI interesting project !!!! I will follow this build ...... I built the F 21 / kfir C1 version last year ,( I think the WIP is still available here) there were no real issues...... so good luck , and happy modeling ... I wonder is the isracast conversion would fit to the I talieri mirage ??? ...I have just tested the resin nose to the Italieri kit , not bad at the first looks Alain Good question. I will probably post some pics comparing as I go along. Link to comment Share on other sites More sharing options...
r0t0rdr1ver Posted November 10, 2016 Share Posted November 10, 2016 http://www.isradecal.com/specials Thank you! Link to comment Share on other sites More sharing options...
nichenson Posted December 23, 2016 Author Share Posted December 23, 2016 Proof I am trying to get there and am not just running my mouth on here. Waiting ever so patiently on my paint booth to arrive so I can at least put some color down and get moving to completing the cockpit and front gear bay. Lothar, BradG and r0t0rdr1ver 3 Link to comment Share on other sites More sharing options...
Guest Peterpools Posted December 23, 2016 Share Posted December 23, 2016 Surely is going to be a interesting thread to follow and enjoy. Which paint booth did you purchase. I just received my Artograph 1530 and am amazed on powerful and quit it is. Keep 'em coming Peter Link to comment Share on other sites More sharing options...
nichenson Posted December 23, 2016 Author Share Posted December 23, 2016 (edited) I ordered the Pace Peacekeeper 36" booth. Supposed to be really quiet and work very well. As soon as it goes in I am making a trip to Lowe's for all the ducting. Just got word that it will be delivered tomorrow sometime. So sometime over the Christmas weekend I will be putting the duct in and finally throwing some paint! Merry Christmas to me! Edited December 23, 2016 by nichenson Link to comment Share on other sites More sharing options...
nichenson Posted January 7, 2017 Author Share Posted January 7, 2017 I have the booth in. I am just waiting on some paint to come in. I thought I had all the proper colors, but alas, I was missing some aggressor gray. I have started adding all of the resin pieces to the fuselage. I am beginning to think that nothing fits on this kit. I am going to have to apply a lot of putty and do a lot of scribing before painting. I will post pics sometime this weekend. Link to comment Share on other sites More sharing options...
nichenson Posted January 12, 2017 Author Share Posted January 12, 2017 (edited) Sometime we are just idiots. Well at least I know I am. Will be getting to that shortly. Anyway, I finally got some time in the booth and have started some assembly. It seems to me that nothing fits either with the resin or with the kit. I do have the right kit. Who knows. It is old, but then again that is the challenge for this challenge. I started cutting out the landing gear bays on both wings. This really isn't too difficult as it basically is grinding and then sanding it flush on the inside surface. If your desk isn't dusty, you ain't working... Thought I was doing really well with the wells in place, both the wings glued together. Then it hit me.... The inside portion of the bay is actually thicker than the outside thus requiring them to be attached to the fuselage halves first and then the wings. How to overcome this... Well, I basically made a long slit in the wing root after cutting out the portion of the bay on the fuselage. Some of this plastic is flexible. Some of it is brittle, but disaster was averted. I am also trying out my new Grex airbrush as well as some new paints. This is vallejo white surface primer. I think I need to go up on the psi, but it did cover ok. Normally I would be worried about overspray, but this kit has raised lines and it will all get rescribed. I also worked on the fin. A bit of comparison. Both are the same scale. The kit up front is the RoG Piper. Edited January 12, 2017 by nichenson MikeMaben, TorbenD, Alain Gadbois and 3 others 6 Link to comment Share on other sites More sharing options...
Shaka HI Posted January 12, 2017 Share Posted January 12, 2017 Is that resin dust? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now