Barry Posted October 15, 2016 Share Posted October 15, 2016 (edited) For what it's worth here is what I have been up to for the last 6 months with respect to modeling. I have been converting a RTR RC 1/16 M1A1 Abrams into a state of the art RC model of a M1A1HA with the T.U.S.K I (Tank Urban Survival Kit) along with the C.S.A.M (Counter Sniper Anti Material) fit. Here is what I am building. Pictures are posted under the Fair Use Act for instructional purposes only. So far I have completely striped, reinforced and rebuilt the lower hull and running gear. I have installed a state of the art Electronic Tank Control Board. The board controls Main Gun Recoil with sound, Turbine Engine start, run and shut down, Main Gun Elevation and Traversing with Motion Stabilization (Target Tracking) as well as controlling the Forward, Reverse and Turn functions. The Control Board has 109 programmable functions though not all are applicable to my installation. It is controlled with an 8 Channel Transmitter/Receiver with Tank Specific Software. I have started the work on the Upper Hull re-detailing by completely reworking the Rear Hull Engine Deck replacing existing detail with more accurate styrene hatches and access covers. I still have a long way to go but once finished I will have a very accurate, functional RC model of one Bad Ass Tank! The complete build up to now can be seen here. https://www.rctankwarfare.co.uk/forums/viewtopic.php?f=201&t=18880 Loving ever minute of it! Barry Edited February 4, 2020 by Barry More accurate title Derek B 1 Link to comment Share on other sites More sharing options...
Guest Posted October 15, 2016 Share Posted October 15, 2016 WOW Barry, very nice. The 50's are the bees knee's . Thanks for the link......Harv Link to comment Share on other sites More sharing options...
Barry Posted October 15, 2016 Author Share Posted October 15, 2016 (edited) WOW Barry, very nice. The 50's are the bees knee's . Thanks for the link......Harv You are welcome Harv! If you're interested in Large Scale Armor it a great site. The folks are very friendly like here. Barry Edited October 15, 2016 by Barry Link to comment Share on other sites More sharing options...
Barry Posted July 31, 2019 Author Share Posted July 31, 2019 This 3year + build is starting to come together. Here are some pics of the mantel mounted 50cal. Thanks for looking in, Barry TorbenD, Out2gtcha, D.B. Andrus and 7 others 9 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted July 31, 2019 Share Posted July 31, 2019 Wow, the detail on Ma deuce is exquisite! Link to comment Share on other sites More sharing options...
Barry Posted July 31, 2019 Author Share Posted July 31, 2019 Thanks Brian I'm really enjoying work on the Abrams and in the larger scale. 1/16" = 1" really allows for some awesome detail potential and I am learning how better to work with brass. Barry D.B. Andrus 1 Link to comment Share on other sites More sharing options...
USMC Herc Posted July 31, 2019 Share Posted July 31, 2019 Barry please turn over your Alien 1/16 shrink ray. You have been damasked here at LSP. I have spent the better part of a Light year reading your 44 page WIP at Rc Tanks. Your attention to detail, scratch building ability in styrene and brass is amazing. Fantastic Job for an Alien Jason Out2gtcha 1 Link to comment Share on other sites More sharing options...
Uncarina Posted August 1, 2019 Share Posted August 1, 2019 Barry, Stellar work. You have taken scratchbuilding this tank to a whole new level, and your photos here are just the tip of the iceberg! Rock on! Cheers, Tom Link to comment Share on other sites More sharing options...
Barry Posted August 1, 2019 Author Share Posted August 1, 2019 Jason, Thank you for the kind words, you have obviously read the WIP as you picked up on the Alien reference! Barry Link to comment Share on other sites More sharing options...
Barry Posted August 1, 2019 Author Share Posted August 1, 2019 7 hours ago, Uncarina said: Barry, Stellar work. You have taken scratchbuilding this tank to a whole new level, and your photos here are just the tip of the iceberg! Rock on! Cheers, Tom Tom, Thank you and remember who's responsible for my turn to RC Tanks. Barry Link to comment Share on other sites More sharing options...
Barry Posted August 7, 2019 Author Share Posted August 7, 2019 Here are some pics of the External Aux Power Unit (EAPU), Smoke Grenade Launchers and the Muzzle Reference Sensor (MRS). The EAPU is from the Trumpeter M1A1 kit assembled with all the detail sanded away. Smoke Grenade Launchers MRS Thanks for looking in. Barry Out2gtcha, KUROK, TorbenD and 3 others 4 2 Link to comment Share on other sites More sharing options...
Shawn M Posted August 7, 2019 Share Posted August 7, 2019 nice details Barry Link to comment Share on other sites More sharing options...
dodgem37 Posted August 7, 2019 Share Posted August 7, 2019 Love this. Sincerely, Mark Link to comment Share on other sites More sharing options...
USMC Herc Posted August 7, 2019 Share Posted August 7, 2019 I love this. We are not worthy. Your work man ship is absolutely awesome. The APU is rdy to run. The smoke launchers are cool. You even have the ground wire!!!! Jason Link to comment Share on other sites More sharing options...
Uncarina Posted August 8, 2019 Share Posted August 8, 2019 You rock star you! Cheers, Tom Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now