Jump to content

Drone Sniper [Industria Mechanika] 1/8


kaia

Recommended Posts

The suite !

I made another "beam" to balance the set !
Added by beams crossed on 2 money together!
The 4éme "beam" being finally partially destroyed there is only a high part and base !
I starte to make the rivets ...only 150 to be made!

On the last photo we realize that the dio is too much big thus I shortened of 06cms!

 

160324053437541539.jpg

160324053440459930.jpg
 

160324053437969938.jpg

Link to comment
Share on other sites

Hello!
A little of progress on the dio (finally the structure):
Thus the second structures beam is ended ( inclusive damages)
Assembly to white with the horizontal beam which will be of use as basis to the window (the arrivals of light) and in more it strengthens the connection between 2 structures!

Creation of the big window ( I put out myself to know how to incorporate the rodoid into the wooden structure)

Cut of 84 tiles of stone floor (essential base of the dio but not bad will be cut around beams and other elements of decorations) 3cmsX3cms!

Some examples of extra which will be of use to decorations

 

 

160326064300881934.jpg

160326064301801130.jpg

16032606425931034.jpg

160326064300543594.jpg

160326064302923041.jpg

Link to comment
Share on other sites

Thanks all !

 

The tiler passed:

160327081609490130.jpg

 

100 de facto rivets (has really 100 it of it there) and 100 are missing it to make

160327081609704933.jpg

 

The box of what will be of use as decoration to the factory fills

160327081611644325.jpg

 

And for finity of which make fragments:

160327081612291793.jpg

 

The frame in plastic card stays in me (it will connect the decoration with the base but will not be regular)!
And well on some tiles to be cut!.

 

 

i hope you enjoy it

Link to comment
Share on other sites

Tiles are all put and sub-slept!
I begin the long work of coat of paint and patina of the ground of the factory!

I finally ended my 200 rivets and they are all put!

 

160329061729549997.jpg

 

The window is when to her current Rhodoïd is cut and will come to find accommodation in the frame whereas amounts are cut and meadows to be stuck on each side by the window!

 

16032906172825124.jpg

The whole structure is sub-slept in black, as well as most of the fragments which will take a seat(take place) on the dio!

It takes shape!
Tomorrow will come the coat of Brown on the structure!
Once painted and skated her will take a  place on the base!
I finally found the color of the drone thus he(it) is not going to delay passing there!

Link to comment
Share on other sites

After one under coat black on my tiles, I made a positioning to white of my structure and there the drama!
I have of to redo 5 tiles to reposition holes (I had a gap of 0,5mm what had for consequence a bad alignment of the roof)

Thus black and first sublayer "takes place" in the Medium Grey TAM ( XF-20) and a touch of XF-53 and XF-23!

 

160331060712343983.jpg

 

Then we sand a little the surface and we tap in the sponge of the White and the Black (Prince August) more or less diluted with water

 

160331060712628507.jpg

 

One obtain at this moment the good beginning of patina!
50 % of the work is made for this stage!

I go now ended the paint of the various fragments and to set up them on the dio in a definitive way!
At the same time I shall place the other elements (electricity meter, gas tank etc.)

Once these set up elements I end the patina of the ground of the factory so that it be more coherent (tasks of fat etc.)

 

 

i hope you enjoy

Link to comment
Share on other sites

Greetings!

Resumed structures with the passage in the airbrush of a mixture of XF-62 (Olive Drab) and of XF-9 ( Hull Red) in 30/70 but "irregular" version not to cover all the structure, we so obtain the "old-looking" typical beginning of nuances which the patina will finish (except that it makes less of work at the end)
Not great visible on the photo but in the truth it is really nice and very convincing (self-satisfaction)

The gas tank has sudden a treatment paint with  salt in 3 tones; black / Grey / blue
The entire fragments are under slept and pre-skated in the airbrush.
Tomorrow I place fragments on the ground and I attack the paint of the roof, I end the window, continuous skate etc..........
That moves forward but I have at least 60 % to make that for the diorama

Hard work

 

 

160401083257607279.jpg

160401083258273202.jpg

160401083258359845.jpg

Link to comment
Share on other sites

Hi !

Next step !

I have paint the feet of the pillars of the structures in white (technique of the lacquer)
I badly masked but the patina will come to hide my "errors"!

 

160403092343408340.jpg

 

I cut of the plastic card(map), daubed in black and made one "frame" for my dio, then I begin to place a part of fragments in the white glue (approximately 1/3 are put)!
Every fragment will be taken back one by one at the time of the patina!

 

160403092343769614.jpg

 

I work on the roof paint of corrugated irons in black and technical base in the salt for the other tints!

I also scratched lamps and began the cablings which will run along beams up to the meter!

Tomorrow organized by the other fragments as well as by the structure (without the roof)

I pass on the drone after that to relax and see clearly there more!

Edited by kaia
Link to comment
Share on other sites

Hello!
Been not too much able to work on the dio today!
Hardly 20 mns this evening thus here is!

I created a kind of conduct close to my gas tank "to furnish" little without overloading too much (assembly just for see)!
I positioned all of fragments (I prefer all not to put them for fear of going too far limits )!

On the basis of the trolley of F-104 in 1/32 I to create a kind of ...... trolley with top wood
Then I work on the roof and I reports me that I am going to have to redo some corrugated iron ...... 5/6 pieces approximately)!

 

 

160405093100219243.jpg

16040509310184309.jpg

160405093100688735.jpg

160405093101431971.jpg

 

 

 

hope you enjoy it

Link to comment
Share on other sites

Next step!

Implementation of the roof a little complicated to stick but in the end it is good!
Implementation of the last one elements on the dio as well as the vertical structure!
From now on it is of the patina and it's heavy stuff in term of working time!

 

160407052449226003.jpg

 

And just for pleasure (the photo is not good)

 

160407052449623120.jpg

Link to comment
Share on other sites

Next step !
Patina of the dio is entirely ended!
The drone is in phase of masking / paint !

There I work on the door of the factory!
Size = 28.5cms of top by 19cms of wide!

Thus patch of card blows up + box with extra!
We cut small strips of 1mm of wide on approximately 27.5cms of top for the borders of the door ( both sides work)
Then we make small strips of 1mm of wide on 18.8cms for the transverse etc. ...... until obtain an attractive motive that he is beautiful when he is finished!

Next stage the high and low drilling (in the green structures) and the scratch(hook-and-loop fastener) of the systems of rotation!
Then paint(painting) and patina + damages on the door!

 

160411040108147087.jpg

160411040107916486.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...