Jump to content
RichieB

1/32 Revell F-4E - What could possibly go wrong!

Recommended Posts

Hi,

 

My name is Richie and I love the smell of burnt kerosene.

 

Having spent many hours viewing the absolute masterpieces on this site and trying to hoover up as much inspiration as I can, I’ve decided to take the plunge and commit my effort to the wider community in an attempt to improve my game. As way of background I suffer from:

 

    a -  an over-ambitious build programme that would require the invention of time travel to complete my collection.

    b -  a lack of resistance to nice new shiny decals (that adds to the first issue).

    c -  an inability to recognise that OOB is just fine in most cases.

    d -  the view that 50 Shades of Grey is the epitome of panel weathering.

    e -  a lack of sufficient minutes in the day to fit everything in (work, family, plastic fettling etc)

 

I am also an Optimistic 80%er. By that I mean I will endeavour to add detail/changes when it makes a noticeable difference but lack of skills / patience may ultimately limit my AMS ambition to a level of ‘Good Enough’.

 

And so to the challenge, a 1/32 Revell F-4E.

 

35275116143_8c488b1247_z.jpg

 

This is going to be only my 2nd 1/32 effort, the first being a Revell Hawk T1, but my first on-line build. Not entirely sure of the markings yet but it will probably be an early USAFE bird in Vietnam c/s. True to form I have acquired more aftermarket stuff than I really need including:

 

-          GT Resin Intakes and Exhausts

-          SH replacement nose

-          CE Aim 9J/P

-          Legend F-4E Cockpit

-          Eduard PE

-          Master Details Pilot figure

-          Master Pitot Probes

 

As if first night nerves wasn't enough, it will also be the first time I have used a lot of this stuff and just to make it more interesting I’m going to put her in flight and light her up. This may get ugly. For those who like their builds quick and dirty, sorry but this is going to be a slow burn (but probably dirty!). Very happy for comments, suggestions, advice etc but don’t be offended if I do something different or not quite true to life, as they say art is in the eye of the beholder. Oh, and as a cautionary tale to others I will also be keeping an catalogue of errors of all the mistakes I make. Lets hope it stays in double figures!

 

Game on.

Edited by RichieB

Share this post


Link to post
Share on other sites

Hi Ritchie and welcome !

 

You got a lot of nice stuff to get this model to the best standards !

 

Good luck with this build, i will follow it with interest as i have 2 Revell F-4E cousins (a F and a G) in the stash and i'd be glad to see how it behaves. :)

Share this post


Link to post
Share on other sites

Thanks for stopping by Chaps, this will certainly be a learning experience for me!

 

So on with the build...

 

I've started removing parts from the trees just to get a feel for the job in hand and the first thing that springs to mind is how big this thing is going to be when (note the positive slant) its finished. I normally have a go a 1/48 so this is my largest model to date. This may prove interesting when we come onto the in flight display aspects later. As I rarely follow the instructions to the letter I've sort of tinkered with a number of items just to get a feel for what I'be let myself in for.

 

Firstly the Legend cockpit which looks ok to the untrained eye but apparently relies on you having the deduction powers of Sherlock Holmes as it comes with no instructions other than a small bit on how to fit the PE. The sidewalls look very nice so I cut them out and then had to figure out how they fit in the model. I also cut out the coming to fit the resin part.

 

Possible Error #1 - I have no idea if its the size of the resin parts of my placing of the sidewalls at the top of the cockpit sill, however there is a gap at the bottom of the sidewalls before they meet the side consoles. No big deal as I will put some card filler in but I may have to add extra detail to make it less obvious. 

 

25a4578c-0123-4fc9-9b2c-e74c21075168_zps

 

Alternatively I could  just leave as is as I'm shutting the canopy anyway but the little AMS voice in my head is damn persistent.

 

Ok question time. When looking at what loadout to give this bird I checked out the fit of the centreline tank.

 

20151101_8125_zpslhr3rdim.jpg

 

Now how do you suppose Revell expect you to glue this baby on when the large lump in the middle in no way conforms to the drop tank pylon?

Anyone had a go at addressing this particular conundrum?

Share this post


Link to post
Share on other sites

that tank is used on a Viet Nam era F-4E. The pylon for the tank is too narrow. In real life area on the bottom of the fuelage is covered by the sides of the pylon. One solution is to remove the pylon on the tank, glue only the front and rear ends of the pylon and put a couple spreaders between the halves to widen the pylon and the reattach it to the tank. two things that ned to be corrected on the kit are the length of the intakes(they need to be moved back about 1/8 inch and for a Viet Nam E you have to replace the outer wing panel with an unslatted version like the one on their RF-4 and not use the slats on the main wing. Good luck with the build.

 

Bruce

Share this post


Link to post
Share on other sites

Hi Chaps and many thanks for the steers,

 

I'm aiming to build a mid to late 70's USAFE bird. From what I've looked at so far the ones I'm interested in have slats but I'm not sure about the belly strap, Any idea when they would have been implemented? I've seen photos with the early tank and the later 600 Gal one but this seems to have been fitted more when they had the wrap-around schemes. 

 

Bruce - Many thanks for the info,I like the idea of modifying the pylon to fit. I'll see what spreading it does to the overall shape but that might also give it more stability. I'm using GT Resin intakes which should resolve the intake length issue. 

 

I'm going to have a go at displaying her in flight which means pilots (unless its a drone of course - now there's a thought!). Revell have thoughtfully not included any so I've borrowed a Tamiya figure and acquired one from Master Details. As usual, and particularly with Resin cockpits, the pilots rarely fit and some form of surgery is required. This is rarely cosmetic and would probably affect their med cat. Thats when I noticed that I appear to have pilots who fit both ends of the human spectrum.

 

24602116847_a909a4d43d_z.jpg

 

 

  The Master Details pilot is on the right. The detail is excellent and just check out the white metal heads (you get a choice of 4! - Tamiya pilot is at the bottom):

 

24602116697_5325750722_z.jpg

 

 

However, According to my very rough calculations the Tamiya pilot is about 1.66M tall, the Master Details pilot is about 1.9M. This could be distracting if one is head and shoulders (literally) above the other. Time for some serious modifications that would rival that of a photo-shopped celebrity!

Edited by RichieB

Share this post


Link to post
Share on other sites

a further note on spreading the pylon... you will probably have to cut down the width of the mounting on the fuselage bottom because the plyon can't be spread that much.

 

 

 

 

 

Bruce

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×