Jump to content
richdlc

1/18 SBD-5 Dauntless - update 18/11/16 - FINISHED!!

Recommended Posts

Hi guys

 

well it's that time of the year when I decide on my next project… at Telford several people asked me what I planned to do next. I hinted that I wanted to do a 1/16 aircraft diorama - possibly a Hellcat. I certainly wanted to do a Vietnam War-era diorama of a crashed French aircraft being discovered by an American patrol in the late 1960s. After considering the possibilities, I decided to use the Merit / Trumpeter 1/18 Dauntless. The French used these aircraft in the First Indochina War. The scale is close enough to 1/16 (or 120mm) that I am hoping I can get away with using the large variety of figures available. I also plan to scratch build a lot of my own figures, or at least heavily modify commercially available ones. If necessary I will ‘bulk out' the Dauntless so it is closer to 1/16.  I plan to use the same techniques as on the B-17, so a lot of mangled metal and bits falling off.  I'm going to skin the whole thing in pewter sheet again.  The real test will be depicting 20 years worth of exposure to a dank jungle atmosphere on the airframe and paintwork.

 

The model itself is really massive - nearly the same size as my B-17 (bearing in mind that my Fortress is missing it's tail end).  The wingspan is 70mm, which works out at just over 2 feet!  I certainly plan to have one wing smashed off, and it's entirely possible I'll have to clip the other one somewhat. I have to bear in mind the size of the base, which looks like it's going to have to be at least 3 x 3 feet in order to get any kind of decent composition for the diorama!

 

This is going to be another long term project, and I'm going to detail the big old bird to within an inch of its life.

 

Oh yes - the finished model will have - wait for it - just a skeleton crew!  (sorry I couldn't resist).  Seriously though, I'll be using a 120mm skeleton from SOL Models - an item I believed was long OOP, but is in fact still in production, and available from a guy in Korea trading on eBay

 

I'll leave you with some photos. Once I've gathered my references, I'll update the thread….but that could take several weeks

 

TTFN!

 

Rich

 

IMG_2266_zps9d00a0a7.jpg

 

that's one huge mutha!

 

IMG_2264_zps92ce0998.jpg

 

l'aviateur inconnu…

 

IMG_2267_zpsb6039c6e.jpg

Edited by richdlc

Share this post


Link to post
Share on other sites
Guest

OH BOY ! Seat, check. Beer, check. Popcorn, check. Lets get the party started !.......Harv :popcorn:

Share this post


Link to post
Share on other sites

Cool, Rich!

BTW, I have a set of SAC metal gear I can send you for free if you are interested. Due to the size of this gear, the metal is quite sturdy compared to more spindly gear. Let me know.

Share this post


Link to post
Share on other sites

Sounds like an interesting project. A skeletonized figure might just work out real well. There's a WWI vignette builder here in the states (can't recall his name at all right now), that uses skeletons and rotting corpses in his displays routinely, and his work is outstandingly cool.

Share this post


Link to post
Share on other sites
Guest Peterpools

Rich

What a fantastic project and I am eagerly looking forward to following from day one to the Ready for Inspection photos.

Keep 'em coming

Peter

Share this post


Link to post
Share on other sites

thanks guys..

 

yep, should be a cool project.  I've always wanted to use a 1/16 skeleton in a diorama, and actually have ambitions to make a WWI vignette with a few of them on display. I have a book that was produced by the Daily Mirror newspaper (I think) in the 1930s called 'Covenants with Death' which is a graphic photo album of the horrors of the trenches.  Many photos of piles of skeletons stacked 20 feet high and so on...

 

anyway I digress . The WWI diorama will have to wait - for now, it's time to start research on the First Indochina War and the use of the Dauntless by the French.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...