rowin Posted August 24, 2011 Share Posted August 24, 2011 (edited) Hi. My second paper model. This is Polikarpov I-16 type 18. 1:33 scale. Model released in the publication Andrzej Halinski Publishing http://www.halinski.com.pl/ Pic: And the gallery: More pic in next post. I hope you enjoy Regards Peter Edited August 26, 2011 by rowin Link to comment Share on other sites More sharing options...
dodgem37 Posted August 24, 2011 Share Posted August 24, 2011 You paper guys are way too much for me. Wonderful, and remarkable. Sincerely, Mark Link to comment Share on other sites More sharing options...
mattlow Posted August 24, 2011 Share Posted August 24, 2011 What I really do like is how you can get very realistically thin edges, like on the cowl - paper in these situations looks like it may be superior to plastic? Very nice. Matt Link to comment Share on other sites More sharing options...
Tomek Posted August 24, 2011 Share Posted August 24, 2011 Sweeeet! I've seen your I-16 before, but every time I'm blown away! There you have it, LSP folks. Paper master at his best! I feel small, but encouraged to push myself a little bit further. Great model Peter!!! :wow: :bow: I know you're working on something, please don't hesitate to share your progress. I would love to see another paper model in the WIP section. Oh, I almost forgot: Link to comment Share on other sites More sharing options...
rowin Posted August 24, 2011 Author Share Posted August 24, 2011 more pictures Link to comment Share on other sites More sharing options...
LSP_Kevin Posted August 24, 2011 Share Posted August 24, 2011 Are you kidding me? That's a paper model? That's simply astounding. Not only one of the best card aircraft models I've seen, but one of the best models of the I-16 I've seen in any medium. Congrats and welcome aboard Rowin! Kev Link to comment Share on other sites More sharing options...
Mikester Posted August 24, 2011 Share Posted August 24, 2011 That's pretty freakin' impressive! Can't believe that's paper, outstanding work!!! Link to comment Share on other sites More sharing options...
Out2gtcha Posted August 24, 2011 Share Posted August 24, 2011 Great stuff! Really well done for ANY medium. Cheers, Brian Link to comment Share on other sites More sharing options...
Tomek Posted August 24, 2011 Share Posted August 24, 2011 Are you kidding me? That's a paper model? Rowin's work put finally mine into the right perspective, don't you say Kevin? Link to comment Share on other sites More sharing options...
Guest Peterpools Posted August 24, 2011 Share Posted August 24, 2011 Rowin Welcome aboard Your work is absolutely fantastic. Peter Link to comment Share on other sites More sharing options...
rowin Posted August 25, 2011 Author Share Posted August 25, 2011 thank you for the warm welcome to the forum! That is a paper model, but to achieve this effect, uses a plastic model airplane techniques, such as wash. In addition, the model is covered before several layers of acrylic clear coat and lightly sanded to obtain a smooth surface. I believe that no matter what techniques, but most important is the final result. And this is what plastic modellers show is an excellent lesson in painting and application service marks of the aircraft. And this is the reason why I like forums like this. Regards Peter Link to comment Share on other sites More sharing options...
LSP_Kevin Posted August 25, 2011 Share Posted August 25, 2011 Peter, are your camouflage and markings pre-printed on the sheets you use for skinning, or do you paint them on like we plastic modellers? Kev Link to comment Share on other sites More sharing options...
OldTroll Posted August 25, 2011 Share Posted August 25, 2011 Paper models are "pre-colored" with the camouflage and markings printed on. Usually the only coloring done by the builder is to color the cut edges of pieces so that the "bare" paper does not show at the butt joints. Link to comment Share on other sites More sharing options...
LSP_Kevin Posted August 25, 2011 Share Posted August 25, 2011 Paper models are "pre-colored" with the camouflage and markings printed on. Usually the only coloring done by the builder is to color the cut edges of pieces so that the "bare" paper does not show at the butt joints. I realise that Ron, but Peter commented elsewhere about printing out his patterns on an inkjet printer, so I figured perhaps he's not using a kit, but rather, printing out his own un-coloured designs and then finishing them using standard plastic model painting techniques. Kev Link to comment Share on other sites More sharing options...
OldTroll Posted August 25, 2011 Share Posted August 25, 2011 Kev - most of the "print-your-own" models are also pre-colored. Some designers also offer uncolored or partially colored models suitable for modification with a graphics program and these allow you to add your own markings, etc. Fiddlers Green and Stahlhart Models are two that immediately come to mind. There are a number of us that repaint the designer's original and then sell the repaint (with the designer's concurrence) on sites like eCardmodels. Peter's use of traditional plastic weathering techniques on a paper model is not seen too often because of the risks involved in coating the paper (pre- or post-assembly). It calls for an experienced, delicate touch which Peter obviously has. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now