Jump to content

Me 110C-4 and G-4 build


Recommended Posts

Still sorting out technical problems with the C-4 but got some work done on the G-4 and its just about ready for paint.

 

post-542-1189087308.jpg

 

After about six trys l finally got a rear seat the l was happy with in size and shape. l first cut out the shape for the seat on some styrene sheet then l got the thinnist strip styrene l could get both in width and thickness. Then like the real thing l wove the pattern together glueing eveything as l go. Once done l then glued that to the basic styrene shape l had cut out. When dried l trimmed and sanded the edges. l then took stryene rod and glued it to the outside edge for the framing and ta da one rear seat.

Link to comment
Share on other sites

post-542-1189087708.jpg

 

The radio sets are just sitting there and will be removed before painting which is real close now. Just some more details to work out in the front cockpit and the cannon bay then we paint

 

later

 

hacker :blink: B)

Link to comment
Share on other sites

post-542-1189174485.jpg

 

post-542-1189174548.jpg

 

Well both are just about ready for paint. The C-4B will have RLM 02 cockpit colour as its an early machine while the G-4 will have the late RLM 66 interior colour. Just a couple of more things to do and we off to the painting

 

later

 

Hacker :) B)

Link to comment
Share on other sites

shifted gears here as somtimes you need to put down one part of a build and move to something else. decided to tackle the noses armament.

 

post-542-1189298161.jpg

 

Both representation of the nose armament is what can l say pitiful. The C-4B is the worst, picture is a thousand words

 

post-542-1189298235.jpg

 

started the G-4 gun deck. now both C-4 and the G-4 basically suppose to have the decks flush with the top of the faring. In the G-4 case its so but in the C-4 is it lowered so l have to fix that. Meanwhile l need to modify the G-4 like its suppose to look like.

Link to comment
Share on other sites

post-542-1189298959.jpg

post-542-1189298979.jpg

 

Here is what l got so far for G-4 nose armament. the guns are there for looks at the moment as l need to make chutes for the feed and shells. The cannons had to be stagard like in the real thing so the chutes could work. The air bottles are added and l still have to wire and put in the hoses lines for the compressed air. The Revell Mk 108 cannons are a good representation of the armament and the work on this nose is easy but the C-4 is a whole nother matter which l am dealing with at the moment. once l get those sorted out l will post the work on them

 

so later dudes

 

hacker :rolleyes: :)

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...