Martyn Posted July 15, 2007 Share Posted July 15, 2007 Evening All. After the fun I had with the Lizzie, decided to go for a out the box build, plus some seatbelts, of this Stuka thats being loitering about in my stash for the last few months. Heres some shots of the cockpit and panel that I started on last week. Still got to make some belts for both the seats Link to comment Share on other sites More sharing options...
Martyn Posted July 15, 2007 Author Share Posted July 15, 2007 Heres both the side walls, and already my plan for a out the box build starts to go out the window. The sidewalls looked a little bare, so started to add some wiring harnesses. and instead of using the supplied decal for the instrument panel, I punched out the dials and fastened them in individually. Link to comment Share on other sites More sharing options...
Martyn Posted July 15, 2007 Author Share Posted July 15, 2007 Since the last two posts, I have added a bit more detail to the sidewalls and also added a code transmitter and Iff transceiver above the radios. hope you folks like it, more to come. Cheers Link to comment Share on other sites More sharing options...
alaninaustria Posted July 15, 2007 Share Posted July 15, 2007 Very nice start Martyn! I really like the added electronic gear above the radios! Cheers Alan Link to comment Share on other sites More sharing options...
Martyn Posted July 20, 2007 Author Share Posted July 20, 2007 Very nice start Martyn! I really like the added electronic gear above the radios! Thanks Alan Since the last post, I have made up the seatbelts from masking tape and etched buckles, and finished of the wiring harness on both sides of the cockpit walls. Link to comment Share on other sites More sharing options...
Martyn Posted July 20, 2007 Author Share Posted July 20, 2007 Found some old ammo belts in my spares stash, and with a bit of messing about managed to fit them from the ammo boxes to the gun mount. Cockpit tub glued up ready for fitting. Please excuse my lousy photo skills, one day I will work out how to get the right lighting. Cheers all !! Link to comment Share on other sites More sharing options...
Martyn Posted July 28, 2007 Author Share Posted July 28, 2007 This build is starting to slow down now, kids are out of school for summer holidays, Wife has decided our kitchen needs decorating (Why?? in the middle of summer) And last but not least, starting a new job next week. Anyhow, cockpit tub glued into fuselage half and then fuselage's glued together. Nose halfs glued together and fitted to fuselage. Wing sections made up, and no matter what I did I was left with a big gap between the centre section and both the left and right wing In the end resorted to filling the gap with scrap plasticard and sanding down flush. and it seems to have come out ok. Cheers all. Link to comment Share on other sites More sharing options...
alaninaustria Posted July 28, 2007 Share Posted July 28, 2007 Great job so far! This is turning out to be an excellent build!! Cheers Alan Link to comment Share on other sites More sharing options...
Guest Rigor Posted July 28, 2007 Share Posted July 28, 2007 : (Why?? in the middle of summer) dont ask about that one your stuka is coming along nicely Link to comment Share on other sites More sharing options...
Martyn Posted October 25, 2007 Author Share Posted October 25, 2007 Evening all, being away for a bit but the Stuka build has slowly progressed. There has being quite a bit done since my last post, so I will just add the photos of what has so far being done. Fuselage joined together, and basic paint applied. Used the supplied templates from the Hasegawa kit, what a simple but brilliant idea Link to comment Share on other sites More sharing options...
Martyn Posted October 25, 2007 Author Share Posted October 25, 2007 Closer view of the office, Prop spinner, with painted spiral (Thanks to Radu for his 'how to' ) I tried the decals supplied for the canopy, but could not get them to work, so after a few choice mutterings went back to the good old masking tape. Link to comment Share on other sites More sharing options...
Martyn Posted October 25, 2007 Author Share Posted October 25, 2007 And finally for now, I have drilled out the blast tubes on the gun, and for the shell ejection port I made up a couple of ejector shields from some scrap brass packing. More to come later folks Cheers. Link to comment Share on other sites More sharing options...
mattlow Posted October 25, 2007 Share Posted October 25, 2007 This looks very nice. Looking forward to seeing it finished. Matt Link to comment Share on other sites More sharing options...
Martyn Posted November 8, 2007 Author Share Posted November 8, 2007 Hiya folks, Well thats it, one finished, evil looking bird. Really enjoyed making this beast --- hope you folks like it. Link to comment Share on other sites More sharing options...
Martyn Posted November 8, 2007 Author Share Posted November 8, 2007 And more Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now