Search the Community

Hello all of you shiny, happy people. I hope everyone is well. A little while ago Airfix released a large scale MkIX Spitfire in 1/24th scale. I was lucky enough to be at the launch event and was blown away by the look of the models on display. I resolved there and then to treat myself to one. I got the kit in December 2023 and began it shortly after unwrapping it on Christmas day. The kit is substantial and relatively easy to build although it gets a tad unwieldy due to it's size so care must be taken in the latter stages of the build. For a kit this size the detail is good. However, there are many aftermarket parts available that improve the look still more. I opted to enhance the cockpit by scratch building a few elements and treating myself to the beautiful Airscale cockpit upgrade. To my mind this is a must for this model. It takes patience to assemble but improves the face of the cockpit no end. The other bits of aftermarket that I'd recommend would be a set of wheels, an entry door and exhausts. There are a few wheel sets available. The ones I went for were by Eduard The detail is great and the wheels look the part but for some reason the subtle molded in flat spot doesn't sit flat on the ground when they are fitted so some judicious sanding is required. If you choose to use these be aware of this before glueing them in place. The door is by Buchon models and is a definite improvement over the somewhat chunky kit part. Lastly, one area where Airfix really dropped the ball is the exhaust stubs. What were they thinking? For a start these are molded in two parts but not where a seam line falls. If two parts are necessary why not make the join along an actual seam? Also, there is a huge hole in the underside of each stub that has to be filled. I can't help wondering if the designer was off the day these were created and the janitor had a go..... Fortunately Eduard come to the rescue with a beautiful 3D printed set. Another must for this build in my humble opinion. Airfix include a plethora of markings but for this build I turned to a combination of 1ManArmy masks and some custom masks kindly created for me by Mozart here on LSP. Many thanks Max I was hoping that painting the markings would give better results in this scale. All of the masks worked beautifully and the fidelity of the stencils needs to be seen to be believed. Add one more to the "must have" list for this build. The 1ManArmy set replicates the markings offered in the kit but my aircraft depicts an aircraft of 412 RCAF sqdn. This squadron was formed in 1941 at RAF Digby in Lincolnshire which is only a stone's throw from where I live. Thank you for your patience so far. Now after this pre-amble it's on to the RFI photos. Setting a couple of hiccups aside (I lost one of the Eduard exhaust stubs) I'm pretty happy with how it turned out. If I were to build another I'd definitely thin the aft lip of the ailerons. I'd also buy a set of turned brass cannons. Getting the two part plastic components round and filled was too much fuss. For a kit assembler like me this Airfix product is nigh on perfect. Plaudits to them for giving us a very good representation of one of the most popular marques of Spitfire. Thanks for your time. I hope you enjoyed this. If you'd like a more in depth article please have a look here for the WIP thread. Cheers, Guy

I've just added the final touches to Airfix's classic 1/24th scale Stuka. This was actually the Heller boxing but the plastic is the same - @Erwingave me a great deal in this last year and I couldn't resist A great kit to build, and despite its age it's crammed full of detail, has some lovely surface detail and goes together really well. What you see here is as it comes in the box, with the only additions being some Eduard belts and a bit of extra plumbing in and around the engine. All paints were Xtracolour enamels. Ju-87 B-2 'Stuka' - 3/St.G2 - Northern France, August 1940 Picture 1 by Thomas Probert, on Flickr Picture 3 by Thomas Probert, on Flickr Picture 4 by Thomas Probert, on Flickr Picture 7 by Thomas Probert, on Flickr Picture 6 by Thomas Probert, on Flickr Picture 8 by Thomas Probert, on Flickr Picture 5 by Thomas Probert, on Flickr Picture 2 by Thomas Probert, on Flickr Picture 9 by Thomas Probert, on Flickr Happy modelling, folks! Tom

Evening all This is very likely to be my last completed model for 2017 - I've been working on it on and off since August and it crossed the finish line this week. I picked up this classic from Airfix at a model show for a mere £20, and set about building it for a bit of nostalgia and a love for one of WWII's unsung heroes (the Spitfire seems to get all the glory!) I built it more or less out of the box, but did use SAC metal undercarriage legs, an Eduard seatbelt set and aftermarket decals from Techmod. A bit of extra piping was added to the engine, but other than that it's as it comes. It fitted together pretty well - at least better than I was expecting for such an old kit. The wing roots were a little tricky and there was plenty of filler needed here - Archer rivets to the rescue to replace those lost in the filling and sanding process. The worst fitting parts were probably the landing light covers and these took a lot of careful trimming to get them flush with the leading edge. Some of the detail is a little clunky and not up to today's standards, but the surface detail is streets ahead of the Trumpeter offering, with beautiful raised rivets and lovely fabric effect on the rear of the fuselage. Paints were from the Xtracolour enamel range, with the flat cote from Humbrol. Hawker Hurricane MkIc, 306 (Polish) Squadron, RAF Ternhill, November 1940. For £20 it was certainly great value for money. Happy modelling! Tom

Hi guys; Here are three more profiles Thierry Dekker prepared for us for our new 1/24th scale Typhoon EagleCals. Thanks to Mark Proulx for his amazing research!