Jer
LSP_Members-
Posts
86 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Jer
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Hi coops, welcome onboard too!! The best places for references are sites like this, there's so much knowledge here you just ask or it's even brought to your attention, but it's always helpful. I'm not an expert on planes so if you're like me and not sure just ask I'm never embarrassed to ask!! I don't know what your skill level is but Tamiya's F-15C is a great build, really fits well together and I really enjoyed building it. Look forward to seeing your work. Cheers Jer- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Thanks Chris for the compliment.- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Cheers Bruce for compliment. In the end I used the kit wheels as I had already spent time thinning and rounding the rubber. Hopefully your upgraded set will be ready for my next Eagle and I won't have to spend ages sanding! Cheers Jer- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Cheers Paul and Gary for the comments.- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Cheers FT- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Hi Kev, of course you can, my honour! Hi Kev, of course you can, my honour!- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Cheers MARU5137 and Harvey for your comments!- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Sat next to my 1/48 Wild Boar That's me signing off.......- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
All completed, thanks for all the kind comments and advice throughout the build. Hope you like the end result.- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Been working on the Hasegawa AIM-120s and the superb Zactomodels AIM9Xs All Painted up. Main body shafts painted in FS36375 Light Ghost Grey. AIM-120s have had their fins painted in Alclad Brunt Iron instead of black. AIM-9Xs have Alclad Magnesium painted fins, polished aluminium tip and stainless steel behind the front fins. Having looked on the web I saw so many different paint jobs and finishes for both, especially the 9X so it took a while to decide on the finish!!! Anyway it's my representation. Apart from a bit of pre shading I haven't done anything else to them but thought you guys might like to see more progress. Cheers- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Been back in the paint shop for the second colour to be added FS 36270 Kept peeling off the formation light frames with the blu tac which was really annoying as I had to reattach and respray twice! Also the rear formation lights based on Eduards destructions were around a different way when compared to my reference photo. Off they came too! That was annoying......but there seems to actually be more than one setup anyway so be careful. Cheers- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Cheers Mark, GT's exhausts are a great enhancement to the kit same goes for the fuel tank. Feels great to finally start painting still a way to go though.- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Cheers Jim- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
First visit to the paint shop........... FS36251 light grey (Lifecolor). Forgot to paint fuel tank and central pylon after cleaning air gun!! Oh well I need to complete the first part as I had the intake up and forgot painting them when they're down hence the tape markers! Cheers- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
Mals Way, Corsair, USS Bunker Hill, Carrier Deck, Part II.
Jer replied to Mal_Belford's topic in Works in Progress
Quality build! Glad to to see you're restarting. -
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Here are the exhaust nozzles painted up. Think I may add more white to represent the White ceramic finish better. I'll grub them up later to make them look more realistic (I hope). Here's the bird pre shaded, I have the tendency to paint heavy so most of the will disappear!!! Unfortunately I had masked the Alclad spray job I did before taking the photos!!!!.....but it came up ok so for the moment you'll have to take my word for it!! Starting to prep camo mask prior to spraying. AIM-9X's etc pre-shaded too.... Hoping to dip her in paint over the weekend..... Cheers- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Thanks Colin for the tip that makes total sense!! Definitely remember that for the next one.....- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Cheers maru5137 for the comments. GT resins parts are great and have nicely enhanced the kit. I'll update with some latest pictures after work. Jer- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Hi showtime, the push rods were kit parts.I believe the kit exhausts are too long. Cheers Jer- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
Great start Tim. I love these types of builds so will watch with interest!
-
What a good build! Enjoyed catching up with what you've done and those decals are awesome!
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Made a start on the GT Resin exhausts. First off I shortened the push rods. URL=http://s1380.photobucket.com/user/Mungo/media/F15C%201-32/image.jpg1_zpsncxgkbi0.jpg.html][/url] Then I shaped each cut end to fit..... Then I repeated multiple times.... Just got to do the other one now!- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
"Slowly" is my reply!- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with:
-
1/32 F15C Eagle (Tamiya + extras) ***** FINISHED *****
Jer replied to Jer's topic in Works in Progress
Cheers for the comments Harv, Stephane and Tomcat14. It's appreciated.- 143 replies
-
- Tamiya F-15C
- AIM-9X
-
(and 2 more)
Tagged with: