Squito2340

What about  a Fairey Firefly in 1/24.. in fact it’s a neglected aircraft in ALL scales really.

Now that I'm out of the closet I thought that I'd post a couple of pics of a Zero I finished a while back. It's getting a little dusty in places- inside the windscreen is very obvious. This was the first model that I'd completed after a very long hiatus. Kept it very close to OOB just adding the plug wires and a few additional wires in the cockpit. Was and still is a great kit.
The beaten up appearance was created using maskol- and then toned down. I heard that the paint didn't stick too well to zeros so I went to town on it.
 
 

 

 

 

What about  a Fairey Firefly in 1/24.. in fact it’s a neglected aircraft in ALL scales really.

What about  a Fairey Firefly in 1/24.. in fact it’s a neglected aircraft in ALL scales really.

What about  a Fairey Firefly in 1/24.. in fact it’s a neglected aircraft in ALL scales really.

https://flic.kr/p/2ea3WzY

A bit of deliberation and hopefully will build more that one kit during this group build but, going to do a Bronco whilst I wait for a few bits for the Lancaster. A few scratch built items should find their way into this model. Lots of visible stuff in the cockpit area...model not started as yet. Photos to come.

I’ve had a little bit of a false start with the Bronco and am waiting on some bits to arrive. In the mean time I’ve had a B25 roaming about the work room for a little while. It’s barely started and certainly qualifies for the group build. Here are the photos at the beginning point for the build. 
The Aussie version is an all metal affair ( never painted a natural metal surface before excepting on large scale motorbikes etc.) and thought that this would be a good challenge. The subject was delivered to Australia early 1945 and was based in Brisbane, QLD. The subject has an extra metal bullet proofing?  adjacent to the cockpit. 
I’m building it with very little corrections and only a few additions not contained in the box so hopefully I can get back to the Bronco soonish. 
 
Photos of where im at follow:
 
 

 

 

 

 

 

 
 
 

Photo of the actual aircraft

Photo of the actual aircraft

I’ve had a little bit of a false start with the Bronco and am waiting on some bits to arrive. In the mean time I’ve had a B25 roaming about the work room for a little while. It’s barely started and certainly qualifies for the group build. Here are the photos at the beginning point for the build. 
The Aussie version is an all metal affair ( never painted a natural metal surface before excepting on large scale motorbikes etc.) and thought that this would be a good challenge. The subject was delivered to Australia early 1945 and was based in Brisbane, QLD. The subject has an extra metal bullet proofing?  adjacent to the cockpit. 
I’m building it with very little corrections and only a few additions not contained in the box so hopefully I can get back to the Bronco soonish. 
 
Photos of where im at follow:
 
 

 

 

 

 

 

 
 
 

I’ve had a little bit of a false start with the Bronco and am waiting on some bits to arrive. In the mean time I’ve had a B25 roaming about the work room for a little while. It’s barely started and certainly qualifies for the group build. Here are the photos at the beginning point for the build. 
The Aussie version is an all metal affair ( never painted a natural metal surface before excepting on large scale motorbikes etc.) and thought that this would be a good challenge. The subject was delivered to Australia early 1945 and was based in Brisbane, QLD. The subject has an extra metal bullet proofing?  adjacent to the cockpit. 
I’m building it with very little corrections and only a few additions not contained in the box so hopefully I can get back to the Bronco soonish. 
 
Photos of where im at follow:
 
 

 

 

 

 

 

 
 
 

I’ve had a little bit of a false start with the Bronco and am waiting on some bits to arrive. In the mean time I’ve had a B25 roaming about the work room for a little while. It’s barely started and certainly qualifies for the group build. Here are the photos at the beginning point for the build. 
The Aussie version is an all metal affair ( never painted a natural metal surface before excepting on large scale motorbikes etc.) and thought that this would be a good challenge. The subject was delivered to Australia early 1945 and was based in Brisbane, QLD. The subject has an extra metal bullet proofing?  adjacent to the cockpit. 
I’m building it with very little corrections and only a few additions not contained in the box so hopefully I can get back to the Bronco soonish. 
 
Photos of where im at follow:
 
 

 

 

 

 

 

 
 
 

I’ve had a little bit of a false start with the Bronco and am waiting on some bits to arrive. In the mean time I’ve had a B25 roaming about the work room for a little while. It’s barely started and certainly qualifies for the group build. Here are the photos at the beginning point for the build. 
The Aussie version is an all metal affair ( never painted a natural metal surface before excepting on large scale motorbikes etc.) and thought that this would be a good challenge. The subject was delivered to Australia early 1945 and was based in Brisbane, QLD. The subject has an extra metal bullet proofing?  adjacent to the cockpit. 
I’m building it with very little corrections and only a few additions not contained in the box so hopefully I can get back to the Bronco soonish. 
 
Photos of where im at follow:
 
 

 

 

 

 

 

 
 
 

https://flic.kr/p/2ea3WzY

Haven’t quite got the photo thing worked out yet however, a link to Flickr is in the previous post.
Shows beginnings of the project ( not the best photos) and original seats, original kit pads and oversized bits cut away, the original patterns for the new pads shown in situ ollowed by resin copies. Fit and look are much better. 
 

OK,
Build has begun.. Still not able to upload photos( if anyone has some hints for me about using an IPad to upload photos it’d be greatly appreciated. 
So where am I:
workigon the ejection seats to be precise. I noticed that compared to the references available the the back  pad and the seat pad are way over size. I decided to make my own using the ever faithful epoxy  to be followed by two resin copies of the remodellled pads. Both are 2 mm shorter than the originals supplied in the kit and should give a better representation of the real thing! The seats themselves required a fair bit of pairing away additional plastic that’s not needed and resizing holes for correct fit og]f parts. Whilst the seat sides are over sized in thickness, I decided to leave them alone. They shouldn’t be noticed noticed  once located in the cockpit with the added wiring distracting the viewer from the inaccuracy. And I thought this would be a quick build. That glasshouse requires details as attention is naturally drawn to it.
 

Thanks for the heads up on the aftermarket undercarriage. Purchased. 
Hopefully some photos soon. Using the guide but to no avail at the moment. IPad doesn’t want to upload.

A bit of deliberation and hopefully will build more that one kit during this group build but, going to do a Bronco whilst I wait for a few bits for the Lancaster. A few scratch built items should find their way into this model. Lots of visible stuff in the cockpit area...model not started as yet. Photos to come.

A bit of deliberation and hopefully will build more that one kit during this group build but, going to do a Bronco whilst I wait for a few bits for the Lancaster. A few scratch built items should find their way into this model. Lots of visible stuff in the cockpit area...model not started as yet. Photos to come.

A bit of deliberation and hopefully will build more that one kit during this group build but, going to do a Bronco whilst I wait for a few bits for the Lancaster. A few scratch built items should find their way into this model. Lots of visible stuff in the cockpit area...model not started as yet. Photos to come.

A bit of deliberation and hopefully will build more that one kit during this group build but, going to do a Bronco whilst I wait for a few bits for the Lancaster. A few scratch built items should find their way into this model. Lots of visible stuff in the cockpit area...model not started as yet. Photos to come.

A bit of deliberation and hopefully will build more that one kit during this group build but, going to do a Bronco whilst I wait for a few bits for the Lancaster. A few scratch built items should find their way into this model. Lots of visible stuff in the cockpit area...model not started as yet. Photos to come.

A bit of deliberation and hopefully will build more that one kit during this group build but, going to do a Bronco whilst I wait for a few bits for the Lancaster. A few scratch built items should find their way into this model. Lots of visible stuff in the cockpit area...model not started as yet. Photos to come.

It’s worthwhile absorbing this, ‘It’s a 1/32nd scale Lancaster’. We are fortunate to be living in such times.. when I began modelling nearly 50 years, we were building AIRFIX KITS that would barely go together without significant encouragement. I remember mixing my own batches of glue mixed with sprue for filling. How good is this , a 1/32 Lancaster!