Animalmother

The Tail wheel has not been added as the kit wheel looks like a button, waiting for the Barracuda Studios wheels. As for the rest, I'll look into them. Andy

Thanks guys, as we've said the kit does have some challenges but builds into a great finished product. Andy.

I have just realised that I never finished this thread off. Well the Tempest is now Complete and I'm very happy with it. The Invasion Stripes are far to tidy but tidy is a good thing....right !! Andy.

It would seem that I've been absent for a week or so, in that time I've managed to get all the major parts attached to the He 162. I was going to be very detailed with my progress on this but to be honest theres not a huge amount of parts to this kit even with the resin upgrades, so really you haven't missed that much. If you look at the engine mount on the spine you'll see that I've taken some of the hight out of the two mounts, this is to bed the engine to the correct height. Iwas a little surprised when I came to join the Fuselage halves as normally with resin upgrades there's usually some easing to be done to get the halves to close. But in this case everything closed up beautifully. Now in the process of tidying up all the seams then I'll spray some primer to see if I've missed anything. Andy.

Had a Spiffing idea, thought I'd use the Kit Engine in the He 162 and put the Awesome Aftermarket Engine on a Trestles (like its being worked on). This is what the Kit Engine looks like along side the CMK one. Painted up the Cockpit this morning, still needs a little work and I want to weather the Seat Cushions but I've done them in Oils so it'll take a while for them to dry fully. The one thing I have found about the Aires Set is that the Ejection Seat actually fits inside the Ejection Rails (Nice). Thanks for looking, more later. Andy.

After spending Yesterday Cutting and Sanding all the Resin Engine Parts, today I've put them all together. And after loosing and finding a few small parts to the Carpet Monster, this is what I'm left with. Very pleased with it indeed, now to do it justice with paint. Andy.

Number 6 seems to be quite popular and I like it too, so maybe thats the one.

No, I'll be doing the normal wings, just hunting for a good paint job as its been pointed out that the one I like is a Desert Scheme and wouldn't sit well in a Forest !! So one of these may do.

Today the Update/Detail Sets turned up and I couldn't be more pleased. Both sets are packed with enough detail to keep anyone happy, now I have to be very careful not to loose any while cutting and sanding. The Aires Detail Set has Cockpit, Main Wheel Well and Weighed Wheels. The CMK Set has everything for a fully Detailed Engine and Engine Compartment. Now to start Building this Beauty.

Interesting looking mod but I think I'm gonna go with the Kit Tail on this build and I may cut out the Flaps so I can lower them slightly. It was just the Paint job I was gonna copy as most 162's look kinda bland with only the Red Arrow to lift them. Andy.

I'm sure that some of you will have one of these in your stash as there not expensive and Revell have really pulled out all the stops over the last few years. Anyway here's some Sprue shots of the 162 Only Five Sprues, so its not a complicated kit, but what is there is nicely molded with recessed panel lines, theres a hint of flash here and there but thats no big deal. The instructions call for 25g to be put in the nose but as we're going to use a resin engine I'll may have to up the weight. The Decals are nice but lack the Swastikas as usual, I'll be going through my Decal Stash to up the interest of the markings. Also as I said earlier I'll be using Uschi van der Rosten's Wood Decals on the wings. In the next post we'll look at the Aries Cockpit and the Engine Set. Andy.

Well after a couple of months messing around with a few Braille Scale Aircraft I'm back with the He 162. Now I have a few idea's for this one which include building it as a Fictional Aircraft rather than an actual Plane. It's going into a Dio of an abandoned He 162 on the edge of a Wood being discovered by Allied Forces. I've also decided on a different Colour Scheme for it and may use some of Uschi van der Rosten's Wood Grain Decals on the upper surfaces of the wings. I know that the Example above is a Swept Wing Concept but what the Hell, I like the paint job. I'm also waiting on an Aires Cockpit and a CMK Engine Detail Set, so there should be plenty to look at. Andy.

I emailed service@revell.de and 10 minutes later received an email back from dept x asking for my postal address. Hopefully that will be that ! Andy.

I've filled in the question form on revell.de asking if I can send the required bits back. There site says I need to ask as if I just send them, they won't deal with it. Here's hoping. Andy.

As the PCM Tempest build comes to a close I'm thinking about my next build and this one will be for next years Sword and Lance Model Show. As ever I'll use all the Aftermarket goodies I can lay my grubby hands on. I have just fired off an email to Revell Germany as the Kit I just received has no Clear Sprue in it, so no Canopy. Reading the info on there site it sounds like a long winded process to get a Replacement set, taking up to 10 weeks for it to reach me. So here's hoping they get back to me soon. This next build will be an In flight display so I need to find a good Pilot for it, if you know where I can find one let me know also if you know of an aftermarket Canopy just to cover all my bases. Hoping to start in a couple of weeks once I have all my bits and bobs to hand. Andy.