Jump to content

Judyc

LSP Sponsors
  • Content Count

    146
  • Joined

  • Last visited

Everything posted by Judyc

  1. Coming soon! In the works. Also don't forget about our EagleCals #99 that has FW 190 Sturmbock from JG 3
  2. Sorry, no plans at this time. Judy, Eagle Editions
  3. Hi guys; We're always trying to improve our product in every way we can, so thank you for your comments. We have been experimenting with different papers to produce a better instruction sheet. We think we have found a high quality glossy paper that will work in our printing system. As far as publishing photos and data on our instruction sheets, in many cases we know nothing about the aircraft other than having access to a poor quality photo. When we do have the right to publish the photos and have access to additional information, we will publish everything we can. This is a big problem especially with regard to Luftwaffe aircraft. We toyed with the idea of doing computer download instruction sheets in the past, but many of our customers do not have access to a computer, but that seems to be changing as we speak. We will now offer both printed instructions with the decals as well as downloadable instructions on our website. Curious as to why John commented on the artwork of the profiles. Why do you think it is a bit crude? All comments are most welcome. Again, thanks for your input, it means a lot to us, Jerry
  4. Our price for the 1:32 scale Preddy figure sculpted only for us by John Rosengrant is $34.95 U.S. Perhaps you guys should get Hannants to carry them for you to save on the individual shipping which is sky high and we have no control over that. I'll drop them an email as well. Telford is just around the corner, so hopefully they can get right on it! Judy and Team Eagle
  5. Our checker board decals should fit as they are the same as the old Cutting Edge decals, both having been designed by Thomas Tullis, EC#102 and #103. Brett Green used Cutting Edge Frenesi for his build as the kit decals are not ready as yet. See his build on Hyperscale here http://hyperscale.com/2017/galleries/p51d32revellbg_1.htm So, all should be well with the world! Judy and Team Eagle
  6. Thought I would remind everyone about all our available P-51 Mustang EagleCals appropriate for the new Revell kit: EagleCals #100 EagleCals #140 EagleCals #139 EagleCals #141 EagleCals #102 EagleCals #103 Click on each one above for more details. All are in stock and available now! thanks for looking, Judy and Team Eagle
  7. Hi guys; after a very long delay, we finally received notice from Cartograf that our Bf 109 G-6 EagleCals #171 and #172 will be here next week!!!! Visit our site for details and to order...so sorry for the long wait but they are definitely worth it!!! http://www.eagle-editions.com/catalogsearch/result/?q=Bf+109+G-6+decals Happy weekend from formerly fire bound Montana to snowy Montana!!! Judy and Team Eagle
  8. Hi guys; after a very long delay, we finally received notice that our Bf 109 G-6 EagleCals #171 and #172 will be here next week!!!! Visit our site for details and to order...so sorry for the long wait but they are definitely worth it!!! http://www.eagle-editions.com/catalogsearch/result/?q=Bf+109+G-6+decals Happy weekend from formerly fire bound Montana to snowy Montana!!! Judy and Team Eagle
  9. I have posted the profiles on our website under News and New Releases here: http://www.eagle-editions.com/example-page/?___store=default Judy
  10. Shipping next week! Me 262 B-1a/U1 in 72, 48 and 32 scales. Visit our site for EagleCals #170 and more!
  11. With the announcement of the Zvezda and Eduard, both excellent 1/48 kits, we wanted to offer the modeler two new sheets for the Bf 109 G-6 EagleCals #171 and EagleCals #172 Bf 109 G-6s Available Spring 2017 72nd, 48th and 32nd scales Click on the link to view the profiles: http://www.eagle-editions.com/example-page/?___store=default
  12. The profiles are done and the decals will be available very soon, just in time for the Revell of Germany Me 262 kit! Also available in 72nd, and 48th scales. Visit our web site to view our new Me 262 decals here
  13. Hannants orders and have received both the spinner sets and the oil cooler sets. Hope this helps, Judy Eagle Editions
  14. Let us know which sheet and we can replace it if necessary. If you purchased from a re-seller who improperly stored them in an unfriendly climate, the decals can become damaged. Let me know your details and we'll sort it out. Judy - Eagle Editions
  15. Yes, please let us know which sheet is giving you fits. Often what happens is, we sell to distributors and re-sellers who may not properly store the decals in a climate controlled environment. As a result, if you purchased from a re-seller with this type of storage, the decal can be damaged. Let us know your details and we'll sort it out. Judy - Eagle Editions
  16. Nicholas - We would never tell you to buy the entire set again. What set was this and with whom did you speak? Let me know as we need to take care of this. Judy
  17. We thought we would share three of the eight profiles approved for the Mossie Mk VI. Our decal engineer is currently wrapping up the artwork based on Steve Deisley's terrific Mk VI profiles. As soon as Cartograf confirms delivery date we will announce it! Enjoy! Eagle Editions http://www.eagle-editions.com/decal-page/?___store=default
  18. Great review Kevin; Now - we only have a few more weeks to wait for the new Mk IV EagleCals! http://www.eagle-editions.com/eaglecals-218.html Our site does state in stock, but will not be here until mid July. Place your order now, we ship based on date order received! Don't forget, our F8 EagleCals will be available at the same time: http://www.eagle-editions.com/eaglecals-165-fw-190-fs.html http://www.eagle-editions.com/eaglecals-166-fw-190-fs-and-a-9.html Happy modeling, Judy and Team Eagle Editions
  19. So sorry about this guys - we released these EagleCals in 2011 which I believe was before the Tamiya 1/32 kit. We'll look into doing separate checkers for the Tamiya 32nd; the 48th are for the 1/48th Tamiya P-51 Judy
  20. Hey John; Just now seeing this...yes our spinner and props should work on the Revell kit. The backplate is fixed onto the spinner and we supply a drill jig to center the hole to fit the kit prop shaft. http://www.eagle-editions.com/eagleparts-fine-cast-resin-parts-to-update-or-modify-model-kits/1-32nd-resins-for-fw-190-ta-152/fw-190-a-spinner-and-large-wooden-prop-blades-ep-47-32.html We also offer the weighted props and common props . Judy for Jerry Crandall
  21. Hi Chuck; not at the moment...I'll check with Jerry
  22. We are just today releasing a set of propeller blades designed to more accurately depict the shape of the Fw 190 D-9 props, for the Hasegawa 1/32nd kit. Replicated from original blades in a private collection, these are designed to essentially drop in - replacing the kit's propeller blades. On our site at http://www.eagle-editions.com/eagleparts-fine-cast-resin-parts-to-update-or-modify-model-kits/1-32nd-resins-for-fw-190-ta-152/eagleparts-64-32-fw-190-dora-corrected-propeller-blades-for-the-1-32nd-hasegawa-kit.html Happy Modeling! Judy and Team Eagle
×
×
  • Create New...