Jump to content


Photo

Henschel HS-123A-1

Alley Cat Henschel HS-123

  • Please log in to reply
75 replies to this topic

#1 Dukie99

Dukie99

    LSP Junkie

  • LSP_Members
  • PipPipPipPip
  • 199 posts
  • Gender:Male
  • Location:Switzerland

Posted 03 April 2016 - 03:37 PM

This is my entry for the Eric Brown GB: Alley Cat's Henschel HS-123A-1. The HS-123 is included in the Wikipedia's list of airframes flown by Eric Brown. Since the HS-123 was considered an obsolete design already in 1939 (production ran from 1936 to 1937), the two other subtypes HS-123B and HS-123C never made it beyond the single prototype stage (and probably did not survive the war) and so I will assume that the HS-123 flown by Eric Brown was an A.

 

This is an all resin kit without any photoetch. No seat belt is provided in the kit so I will add an HPH Bf-109 belt, otherwise it will be built OOB. I may go with the kit decals or paint the markings, either way it will be painted as bird fighting on the Eastern front.

 

Here are the box shots:

Box%20shot_zpsi05u1jee.jpgstarting%20point_zpspcsxmyxs.jpg

Cheers,

 

David

 


  • Kagemusha, Martinnfb, harvey and 8 others like this

#2 harvey

harvey

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 17,954 posts
  • Gender:Male
  • Location:Shell Knob MO

Posted 03 April 2016 - 03:55 PM

OH BOY !......Harv :popcorn:


  • MARU5137 likes this

There's a fine line between cuddling and holding someone down so they can't get away
working on:  Tamiya F4U-2 Night Fighter
Trump P-38M BACK ON BENCH FINISHED!!!
 


#3 BradG

BradG

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 2,711 posts
  • Gender:Male
  • Location:Melbourne, Australia

Posted 04 April 2016 - 01:15 AM

That looks cool. I'm not sure where he would have flown one as I don't think any were captured. Unless he flew one pre war in Spain or Germany. He was friends with Hanna Reitsch so he may have been able to get a fly in one. It'd be nice to see his log books.


Edited by BradG, 04 April 2016 - 01:16 AM.

  • harvey and MARU5137 like this

#4 mozart

mozart

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 2,176 posts
  • Gender:Male
  • Location:Dorset, but nearly Somerset & Wiltshire

Posted 04 April 2016 - 06:22 AM

It'd be nice to see his log books.


I think they are documents of national interest so surely there must be plans afoot to make them available in some form or place for all to see?

Max

www.ordinarycrew.co.uk

 

 


#5 LSP_Kevin

LSP_Kevin

    Senior Member

  • Administrator
  • 38,773 posts
  • Gender:Male
  • Location:Melbourne, Australia

Posted 04 April 2016 - 07:00 AM

Nice choice, David! You don't happen to have a date or year on that kit anywhere, do you? Trying to update the database...

 

Kev



#6 Dukie99

Dukie99

    LSP Junkie

  • LSP_Members
  • PipPipPipPip
  • 199 posts
  • Gender:Male
  • Location:Switzerland

Posted 04 April 2016 - 04:11 PM

Kev,

I will check tomorrow when I am back at home, but AFAIK this kit is a recast of the Montex kit. From what I could gather on the web, the only difference with the Montex kit is that Alley Cat has included decals where the initial Montex kit had only masks. Cheers, David

#7 LSP_Kevin

LSP_Kevin

    Senior Member

  • Administrator
  • 38,773 posts
  • Gender:Male
  • Location:Melbourne, Australia

Posted 04 April 2016 - 09:22 PM

Thanks, David. I don't have release dates for either the Montex original or this Alley Cat re-release, so I'll take what I can find!

 

Kev



#8 Azgaron

Azgaron

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 3,308 posts
  • Gender:Male
  • Location:Sweden

Posted 05 April 2016 - 07:24 AM

Looks very nice! :)

 

Håkan



#9 Dukie99

Dukie99

    LSP Junkie

  • LSP_Members
  • PipPipPipPip
  • 199 posts
  • Gender:Male
  • Location:Switzerland

Posted 05 April 2016 - 09:22 PM

Kev,

 

There is no date on the box or on the instructions, there is however a Copyright 2012 on the color profile and decaling instructions contained in the box.

 

I received today this book to use as reference:

HS-123book3_zpsdrfe2mqq.jpg

I only glanced through it so far but it looks like a great reference with lots of period pictures I had never seen, color profiles and caption from the operating manual:

HS123book_zps1uwg9iv4.jpg

HS123book2_zpsag3qzwda.jpg

 

I gave the kit parts a soapy water bath and once all is dry I will get going.

 

David


  • harvey, airscale, Learstang and 2 others like this

#10 LSP_Kevin

LSP_Kevin

    Senior Member

  • Administrator
  • 38,773 posts
  • Gender:Male
  • Location:Melbourne, Australia

Posted 05 April 2016 - 09:31 PM

Kev,
 
There is no date on the box or on the instructions, there is however a Copyright 2012 on the color profile and decaling instructions contained in the box.


Thanks, David. 2012 it is!

Kev


  • harvey likes this

#11 MARU5137

MARU5137

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 18,419 posts
  • Gender:Not Telling

Posted 09 April 2016 - 08:33 AM

Dave,

 

Oh Gosh ! This is going to be such a lovely build to follow...

 

AWESOME choice...  nice references too :piliot:

 

Love the aircraft...


  • harvey likes this

Res Non Verba .

La calma è la virtù dei forti !

Potius Mori quam foedari.


#12 Thunda

Thunda

    Hooked For Life

  • LSP_Members
  • PipPipPipPipPip
  • 401 posts
  • Gender:Male
  • Location:Dundee, Scotland

Posted 10 April 2016 - 02:07 PM

Its definitely down in the list of aircraft that he flew, although I dont know under what circumstances. Looking forward to this build....



#13 Dukie99

Dukie99

    LSP Junkie

  • LSP_Members
  • PipPipPipPip
  • 199 posts
  • Gender:Male
  • Location:Switzerland

Posted 11 April 2016 - 01:18 AM

And so it starts. Since this is my first full resin kit, I am approaching it with caution, even though reviews I had found at the time before purchasing the kit were excellent. A lot of time has been spent cleaning the parts and cutting them from their pouring block. For the smaller parts (and there are a lot of them), I used the RB production set of mini saws and they are working extremely well but you need to take your time, not applying too much pressure and let the tool do the work. Most of the cockpit parts have now been cleaned, primed with Mr. Resin surfacer, given a coat of RLM2 (Gunze) and then a shot of clear. No pictures yet but that will come soon. I actually spent a good part of the week building the engine which is very nicely cast with separate cylinders. The only problem I had was with the pushrods, which seem too short to fit but maybe it was be not cleaning the cylinders properly. I ended up replacing the pushrods with 0.5mm brass rods and resin nuts from Meng. I also added the wires (using lead wire), which will be hardly seen once the engine cowl is in place. I thought about leaving one cowl panel open, but that would have meant scratchbuilding the engine frame and a lot of details behind the cylinders, so I will close all cowl panels. Here are two pictures of the engine. I need to give it a coat of flat but otherwise it is done until I install the cowl panels and then I can glue the exhausts and some more wires.

Engine2_zpse61h2i2c.jpg

engine1_zps1nmk4fhl.jpg

Till next time, thank you for watching.

 

David


  • Rick Griewski, harvey, OldTroll and 5 others like this

#14 BloorwestSiR

BloorwestSiR

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 4,449 posts
  • Gender:Male
  • Location:Toronto, Canada

Posted 11 April 2016 - 01:26 AM

Great looking engine David! What paint did you use for the finish?

Carl

#15 MARU5137

MARU5137

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 18,419 posts
  • Gender:Not Telling

Posted 11 April 2016 - 07:58 AM

David, the Engine is looking Superb.

:goodjob:

Res Non Verba .

La calma è la virtù dei forti !

Potius Mori quam foedari.






Also tagged with one or more of these keywords: Alley Cat, Henschel, HS-123

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users