Jump to content


Photo

HobbyZone Builder's Notes


  • Please log in to reply
18 replies to this topic

#16 DeanKB

DeanKB

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 3,427 posts
  • Gender:Not Telling

Posted 25 April 2017 - 11:52 PM

Having had & used mine for over a year, I'd say:

 

The 3 drawer units are better value than the 6 drawer units. They are far more flexible & are cheaper. Don't glue the interior spacers in place, move the as necessary.

 

The corner draw units are fairly pricey. Buy the corner shelf units instead, they are cheaper. Leave out the little shelf inside & you've quite a big storage area.

 

The paper towel holder is not great. Only a small paper towel fits & it doesn't seem a good use of space. 

 

The "WIP" units are a good storage area for largish bits. They are kept clean & you can see exactly what's in there.

 

The free-standing brush & tool holder is great. Holds a ton of stuff & can follow you around the bench.

 

The shelf-racks are flexible, but lack depth for larger items. 


  • HobbyZoneUSA likes this

#17 HobbyZoneUSA

HobbyZoneUSA

    Member

  • LSP Sponsors
  • PipPip
  • 28 posts
  • Gender:Male

Posted 26 April 2017 - 03:17 PM

Having had & used mine for over a year, I'd say:

 

The 3 drawer units are better value than the 6 drawer units. They are far more flexible & are cheaper. Don't glue the interior spacers in place, move the as necessary.

 

The corner draw units are fairly pricey. Buy the corner shelf units instead, they are cheaper. Leave out the little shelf inside & you've quite a big storage area.

 

The paper towel holder is not great. Only a small paper towel fits & it doesn't seem a good use of space. 

 

The "WIP" units are a good storage area for largish bits. They are kept clean & you can see exactly what's in there.

 

The free-standing brush & tool holder is great. Holds a ton of stuff & can follow you around the bench.

 

The shelf-racks are flexible, but lack depth for larger items. 

Hi Dean,

 

The paper towel holder is designed for the European rolls and the only way I could get a typical US roll in there was to leave out the hanger bar and brackets, plus remove part of the roll until the diameter is right. Not the best solution but it does get the bloody thing off the bench.

 

As for the three-drawer units, I think you mean the OM02a three-drawer units and I use mine quite a bit. The only problem with those is depth and that is solved with the OM02b two-drawer units.

 

The big limit for HobbyZone modules is the current form factor - roughly 12 inch width, six inch depth and height. I am hoping they'll consider a wider form factor. Since they made the double high (12 inch high) OM10 WIP module, I have suggested a double-wide design for the two and three-drawer units so we can have larger drawers for the larger tools that won't fit into the current drawers.

 

The shelf modules (OM05u and OM06u) are designed for the odd-shaped bottles but as you say, they lack the depth to handle larger bottles like thinners, etc. For that purpose, we have the OM13 Hutch Module which I use to store the bottles that won't fit on the racks.

 

Good feedback, thanks!


Michael Benolkin

Owner at HobbyZone USA (www.hobbyzone.biz)

Owner/publisher/bottlewasher at Cybermodeler Online (www.cybermodeler.com)

Owner/publisher at F-100.org (www.f-100.org)


#18 petrov27

petrov27

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 1,385 posts
  • Gender:Male

Posted 10 May 2017 - 12:27 PM

Hiya - just received my first units - for assembly can you recommend the type of clamps that are needed? I do not have any so would need to find some - thankya!


-Patrick

 


#19 Bill_S

Bill_S

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 2,395 posts
  • Location:Rochester, NY

Posted 26 May 2017 - 01:58 PM

On the PN02 (Large Brush and Tool Holder), the smallest diameter holes that go across the front are just a wee bit too small for the shank of a standard Dremel bit (3mm vs. 1/8 inch). It's a pain to open them up after the unit is assembled...

 

I started building my shelf of doom, but I never finished it.

 





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users