Daywalker Posted May 2, 2011 Share Posted May 2, 2011 Just received this in the post today, I am so excited to build this kit! Got it for a great price on Ebay, and with the amount of goodies in the box it really is a deal. Besides the Roden 1/32 Dr.1 kit in the bag, this boxing includes resin tailplane, ailerons, cowl, and deck to build an F.1. So either a Dr.1 or an F.1 can be built from this kit. Also includes two frets of Eduard PE, resin engine and other bits, as well as a resin figure of Voss standing in flying gear. Cartograph decals too, for both Voss' aircraft and another F.1. Link to comment Share on other sites More sharing options...
Jamme Posted May 3, 2011 Share Posted May 3, 2011 Hi Frank. Looks really nice! Can't wait to see the start of the build. Cheers, Jamme Link to comment Share on other sites More sharing options...
Dave J Posted May 3, 2011 Share Posted May 3, 2011 This is the boxing to get! Its a real deal for sure! I have a couple in the Stash... Looking forward to your build. Any ideas on the marking scheme? Link to comment Share on other sites More sharing options...
TimW Posted May 3, 2011 Share Posted May 3, 2011 Excellent! Makes me want to build my McCudden SE-5a to chase him around the room. Tim W. Link to comment Share on other sites More sharing options...
Daywalker Posted May 4, 2011 Author Share Posted May 4, 2011 Thanks for looking in guys! Really hoping to start this one in the next few days. As far as markings go, I found one I really like from an OOP Cutting Edge sheet, but sadly I do not have it. Some digging has shown that besides those, the only other offerings out there are two sheets from EagleCals. Don't really care much for those unfortunately. So, I shall probably go with Voss' F.1. Link to comment Share on other sites More sharing options...
Qvarre Posted May 19, 2011 Share Posted May 19, 2011 You better check out Montex masks for this bird.I do not recommend using the origianl Roden decals if they are still in that box. Early Roden decals is This Pfalz is a early Roden and at that time I built this there was no replacements to get What scheme is you in for?Perhaps You can find it at Montex My link Larsa Link to comment Share on other sites More sharing options...
LSP_K2 Posted May 19, 2011 Share Posted May 19, 2011 Thanks for looking in guys! Really hoping to start this one in the next few days. As far as markings go, I found one I really like from an OOP Cutting Edge sheet, but sadly I do not have it. Some digging has shown that besides those, the only other offerings out there are two sheets from EagleCals. Don't really care much for those unfortunately. So, I shall probably go with Voss' F.1. Have you looked at the gorgeous Pheon Models selections yet? Here's a link to one set. Pheon Models decals They can be ordered directly from Rowan here. pheon.models@hotmail.co.uk I think there's also another set, but can't seem to find the link. Rowan would be more than happy to advise you i'm sure. Link to comment Share on other sites More sharing options...
LSP_K2 Posted May 19, 2011 Share Posted May 19, 2011 (edited) Just received this in the post today, I am so excited to build this kit! Got it for a great price on Ebay, and with the amount of goodies in the box it really is a deal. Besides the Roden 1/32 Dr.1 kit in the bag, this boxing includes resin tailplane, ailerons, cowl, and deck to build an F.1. So either a Dr.1 or an F.1 can be built from this kit. Also includes two frets of Eduard PE, resin engine and other bits, as well as a resin figure of Voss standing in flying gear. Cartograph decals too, for both Voss' aircraft and another F.1. Just out of curiosity, what does the Voss figure look like? Is it well done? The reason I ask is that soner or later, I'd like to do an Albatros that Voss flew, and it might be a whole lot cheaper to buy another whole Dr.I and figure, than to lay down the cash for the drop dead gorgeous Model Cellar Voss figure in this scale. Edited May 19, 2011 by Typhoonattack1 Link to comment Share on other sites More sharing options...
Dave J Posted May 19, 2011 Share Posted May 19, 2011 Just out of curiosity, what does the Voss figure look like? Is it well done? Figure is nicely done... but it doesn't look like Voss Link to comment Share on other sites More sharing options...
LSP_K2 Posted May 19, 2011 Share Posted May 19, 2011 Figure is nicely done... but it doesn't look like Voss I may go with the MC one then as that one definitely looks like Voss. Of course by the time I'm finished with it it may not. Link to comment Share on other sites More sharing options...
Daywalker Posted May 19, 2011 Author Share Posted May 19, 2011 Thank you for the help fellas! Larsa- Is that your Pfalz? It looks incredible! Kevin- Thank you for the head's up on the Pheon decals, I just sent Rowan a PM inquiring about them. As for the resin figure, Dave is right- it is well done but doesn't really look like Voss IMHO. Here's a photo gleaned from the web showing the parts: Link to comment Share on other sites More sharing options...
LSP_K2 Posted May 20, 2011 Share Posted May 20, 2011 Thank you for the help fellas! Larsa- Is that your Pfalz? It looks incredible! Kevin- Thank you for the head's up on the Pheon decals, I just sent Rowan a PM inquiring about them. As for the resin figure, Dave is right- it is well done but doesn't really look like Voss IMHO. Here's a photo gleaned from the web showing the parts: Nope, doesn't look like Voss at all, but this does! Link to comment Share on other sites More sharing options...
Qvarre Posted May 20, 2011 Share Posted May 20, 2011 Hi The included figure looks real nice to me.I can´t say it bad and I´m glad that it´s not a pirated Model cellar.The Voss figure from Mike Good is just awsome, I have it standing beside Rodens Albie DIII So why can´t you have this figure besides the Dr1. Yep that´s my Pfalz too. Link to comment Share on other sites More sharing options...
LSP_Ray Posted June 25, 2011 Share Posted June 25, 2011 Thanks for looking in guys! Really hoping to start this one in the next few days. As far as markings go, I found one I really like from an OOP Cutting Edge sheet, but sadly I do not have it. Some digging has shown that besides those, the only other offerings out there are two sheets from EagleCals. Don't really care much for those unfortunately. So, I shall probably go with Voss' F.1. Which a/c on the C.E. sheet were you looking at? I have at least one sheet and the only a/c I was thinking of using was Richtofen's brother. Link to comment Share on other sites More sharing options...
Daywalker Posted June 25, 2011 Author Share Posted June 25, 2011 Which a/c on the C.E. sheet were you looking at? I have at least one sheet and the only a/c I was thinking of using was Richtofen's brother. Hello Ray, thank you so much for the offer! I REALLY like the A/C of Hauptmann Adolf Ritter von Tutschek, the one on the left on this sheet: If you have this sheet, and are willing to part with those, I would be eternally grateful! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now